SAFAVIEH COUTURE Eugenie SFV4705 User manual

CARE AND MAINTENANCE
NOTICE
Weight Capacity: 275 lbs
WARNING: DO NOTSTAND ON BENCH
WARNING: DO NOTOVER TORQUEWASHER/SCREWS
8X
BLegs 4X
8X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
The legs and hardware are located underneath the
bench in the zipper compartment
8X
Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening SFV4705
Dimensions:34.84"WX21.26"DX24.41"H
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.25*65MM
HW1
HW2
HW3
HW4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF
THE SEAT AND TAKE OUT LEGS AND HARDWARE PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
STEP2 STEP3 INSERT THE LEGS AND SCREW
IN THE
BUT DON'T TIGHTEN COMPLETELY. REPEAT
THE SAME STEPS FOR THE OTHER THREE LEGS
SCREWS.
STEP4 CLOSE THE ZIPPER ON THE UNDERSIDE OF
THE SEAT STEP5 PUT THE BENCH UPRIGHTAND MAKESURE
LEGS ARE LEVEL,THEN FIRMLYTIGHTEN
ALLEN KEY WHILE THE BENCH IS UPRIGHT
AS PICTURED ABOVE(IF THE CHAIR WOBBLY, YOU
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
ALL
SCREWS
CAN
WITH
HW2 HW1 HW3
BB
B
B
B
B
B
BA
A
HW4
The legs and hardware are located underneath the bench in the zipper compartment.