SAFAVIEH COUTURE SFV2111 User manual

* Do not tighten bolts until completely assembled.
Model# SFV2111
CARE AND MAINTENCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild
cleaner. Test the cleaning method on a hidden area before using them over the
entire area.
NOTICE
* This item may require periodic tightening.
* This item should be assembled on a soft surface to prevent scratching the finished
product during assembly.
* Please make sure that you have all parts indicated before you begin assembly of
this item.
Part List and Hardware List
Product Dimensions:82"W x 31.5"D x 31.25"H
Hex Socket Bolt WARNING
Weight capacity:750lbs
CHAIR BACK
ARMREST (RIGHT)
ARMREST (LEFT)
SEAT CUSHION (LEFT)
Allen Key
Hex Socket Bolt

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:30 minutes.
Tools Required for Assembly (included):Allen Key.
Step 1
Uncover Velcro on the non-woven fabric at the
underneath of Seat Frame (C), Place Seat
Frame (C) to the Chair Back (B), Using Allen key
(HW3) to lock with 8*Hex Socket Bolt (HW2).
A
BHW2 HW2
Step 2 Step 3
E
B
Assembly 6*Leg (A) on underneath of Seat
frame (C), Using Allen key (HW3) to lock with
24*Hex Socket Bolt (HW1).
Attach both Armrest (Left) & (Right) (D & E) to
the Chair Back (B) / Seat frame (C) in the
corresponding position, Using Allen key (HW3) to
lock with 8*Hex Socket Bolt (HW2),
Then cover the Velcro back and press tight. as
picture.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:30 minutes.
Tools Required for Assembly (included):Allen Key.
Assembly is completed.
Step 6
G
D
HW2
HW3
Step 4 Step 5
Straighten up the assembled product, then place
the 2*Seat Cushion (Left & Right) (F & G) on.
B
Uncover Velcro from the fabric on the back side's
both side (left & right) of Chair Back (B), Using
Allen key (HW3) to lock with 6*Hex Socket Bolt
(HW2). Then cover the Velcro back and press
tight. as picture.