SAFAVIEH COUTURE Bartolili SFV5116A User manual

NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help.
Please email customersuppo[email protected]m
PREPARATION
Model# SFV5116
*Before beginning assembly of product, make sure all parts are present. Compare parts with
Product Dimensions: 60.80" W x 18.90" D x 18.10" H
part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 15 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
Parts List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
ASeat 1X
BLegs 4X
CConnecting Rod 2X
DWooden Cork 4X
HW1 Bolt M8 x 50MM 12X
Weight Capacity: 550 lbs
HW2 Spring Washer 8.5 mm 8X
WARNING: DO NOT STAND ON BENCH
HW3 Flat Washer 9 mm 12X
WARNING: DO NOT OVER TORQUE BOLTS
HW4 Allen Key 1X

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 15 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1：Please take out the seat and turn it over.
STEP 2：Please assemble the legs and Connecting Rod with
Bolts.
STEP 3：Please assemble the legs on the seat as above
photo.
STEP 4：Please assemble the wooden corks on the legs as
above photo.
STEP 5：Put the bench upright and make sure the legs are level.
If the bench slight wobble, you can adjust with the gliders
HW4
2X
C
D
HW1
HW3
B
B
A
HW4
HW1
HW2
HW3
4X
B
B
B
B
A
D
D
D