SAFAVIEH COUTURE Salome KNT7041 User manual

Weight Capacity: 275 lbs
WARNING: DO NOTSTAND ON BENCH
WARNING: DO NOTOVER TORQUE WASHER/SCREWS
12X
BLegs 4X
12X
Part List and Hardware List
PIECEDESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
12X
Allen Key 1X
ASeat 1X
Model#: KNT7041
Dimensions:61.0"WX21.7"DX18.3"H
HW1
HW2
HW3
HW4
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.05*30MM
QUANTITY
PREPARATION
*Before beginning assemblyof product, make sure all parts arepresent. Compare
parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
*Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
*The use of steam or water-based cleaners may cause excessive shrinking or
staining.
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before
you begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [email protected]

B
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE STEP2 PUT THE WASHERS ON THE SCREWIN
THE ORDER SHOWN IN THE PICTURE STEP3 INSERT THE LEGS AND SCREW IN THE
SCREWS BUT DON'T TIGHTEN COMPLETELY.
STEP4 CLOSE THE ZIPPER ON THE UNDERSIDE OFTHE
SEAT
STEP5 PUT THE BENCH UPRIGHT AND MAKE SURE ALL
LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH
ALLEN KEY WHILE THE BENCH IS UPRIGHT AS
PICTURED ABOVE(IF THE BENCH WOBBLY, YOU CAN
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
HW2 HW1 HW3
HW1
HW2
HW3 HW4
A
B
HW4
B
B
B
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PREPARATION