SAFAVIEH COUTURE SFV5530A User manual

CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items on itemscan discolorwood.
Wipe up spills immediatelyandavoidcommon hazardssuch ashot dishes, harsh solventsand abrasives.
Cleaning should bedone witha soft line free cotton clothdampened with wateror furniturepolish.
On highly used surfaces we recommend applying a quality paste wax, which should be used on a
regularbasisto provideadditional protection from scratches and spills .
How often you apply the wax depends on how much wear the furniture receives.
NOTICE
Please make sure that you have all parts indicated before you begin assembly of this item.
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
This item may require periodic tightening.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A CABINET 1X
B LEGS 4X
Model#S
FV5530A
Productdimensions:71”Wx20”Dx30”H
4
X
SHELF PIN
SMALL
Weight capacity:
200 LBS
WARNING: DO NOT STAND ON SIDE BOARD
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
HW1
4
X
HW
2
SHELF PIN
S
LARGE
4
X

PREPARATION
Beforebeginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged,do not attempt to assemble the product.
Estimated assembly time: 10 minutes.
Step 1 Put the cabinet (A)upsidedown on a soft surface, attach theleg (B) to the cabinet (A),and rotate itclockwise as shown in figure.
A
4X
B
B
B
B
Straighten the cabinet,now your item is ready to use.
NOTE
–
S
mall
pin willinstall in side
panel
of the cabinet, and largepin willinstall in mid
partition
of the cabinet
.