SAFAVIEH COUTURE SFV5536A User manual

Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items on items can discolor wood.
Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft line free cotton cloth dampened with water or furniture polish.
On highly used surfaces we recommend applying a quality paste wax, which should be used on a regular basis to provide
additional protection from scratches and spills.
How often you apply the wax depends on how much wear the furniture receives.
CARE AND MAINTENANCE
Please make sure that you have all parts indicated before you begin assembly of this item
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
This item may require periodic tightening.
NOTICE
PIECE
DESCRIPTION
PICTURE
QUANTITY
A
B
HW1
CABINET
LEG
8mm x 16mm
8mm x 15mm
ALLEN BOLT
6X0.5X20MM
ALLEN KEY
1X
4X
12X
1X
Model #SFV5536A
Product dimensions: 22”Wx17”Dx23.5”H
Part List and Hardware List
12X
HW2
HW3
HW4
Weight capacity: 100 LBS
WARNING: DO NOT STAND ON SIDE TABLE
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
12X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 15 minutes.
PREPARATION
STEP 1: Lay the cabinet A upside down as shown in figure, place leg B in the cabinet A
then insert washer HW1, lock washer HW2, Allen bolt HW3 and tighten with the help of
Allen key HW4
HW3
HW2
HW4
HW1
4X
Straighten the cabinet, now your item is ready to use.
A
B
B
B
B