SAFAVIEH COUTURE SFV4701 User manual

CARE AND MAINTENANCE
NOTICE
WARNING: DO NOTSTAND ON CHAIR
WARNING: DO NOTOVER TORQUE WASHER/SCREWS
HW2 Flat Washer(M8) 12X
BLegs 4X
HW1 Split Lock Washer(M8) 12X
Part List and Hardware List
PIECE DESCRIPTION PICTURE
QUANTITY
SAFAVIEH
C O U T U R E
The legs and hardware are on the top of the chair.
HW3 Socket Screws 8*1.25*30MM 12X
HW4 Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening SFV4701
Dimensions:33.46"WX31.69"DX40.94"H
Weight Capacity: 275 lbs

PREPARATION
STEP3 INSERT THE LEGS AND SCREW IN THE SCREWS BUT DON'T
TIGHTEN COMPLETELY.
The legs and hardware are on the top of the chair.
STEP4PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL,
THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE THE CHAIR IS
UPRIGHT AS PICTURED ABOVE(IF THE CHAIR WOBBLY, YOU CAN EASY
ADJUST LEG BOTTOM PLASTIC SCREW)
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 THE LEGS IS ON THE TOP OF THE CHAIR, OPEN TO TAKE THE LEG
AND HARDWARE(THE ROPES ON THE CARTON HAVE NO OTHER USE,
THEY ARE ONLY USED FOR TYING LEGS)
STEP2 PUT THE WASHERS ON THE SCREW IN THE ORDER SHOWN IN
THE PICTURE
HW2 HW1 HW3
HW4
HW1
HW2
B
HW3