SAFAVIEH COUTURE Celina SFV4523 User manual

CARE AND MAINTENACE
NOTICE
Part List
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a soft lint free cotton clot dampened with water or furniture polish. On highly used
surfaces we recommend applying a quality paste wax which should be used on a regular basis
to provide additional protection from scratches and spills. How often you apply the wax
depends on how much wear furniture receives.
*Please make sure that you have all parts indicated before you begin assembly of this item
*This item should be assembled on a soft surface to prevent scratching the finish during assembly
*This item may require periodic tightening
Item#SFV4523
Product Dimensions (inch): 81-11/16"W x 90-3/8"D x 50"H
1/8
Weight Capacity: 800 Lbs
x 4
A
B
G
C
D
E
F
H
PIECE PICTURE QUANTITY
I
J
K
HW1
x 1
x 2
x 1
x 2
x 6
x 2
x 1
DESCREPTION
Legs
PIECE PICTURE QUANTITYDESCREPTION
x 6
x 8
x 30
x 2
x 4
x 16
x 24
x 4
Short middle legs
Long middle legs
Block "U"
Hex Bolt
(5.8x0.8x40mm)
Hex Bolt
(5.8x0.8x30mm)
Screws
(Ø4x50mm)
Screws
(Ø4x30mm)
Allen key
Headboard
Slats
Middle support bar
Side Drawers
Footboard
Side drawers
Drawers slot
HW2
HW4
HW5
HW6
HW3 x 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list if any part is missing or damaged. Do not attempt to
assemble the product.
Estimated Assembly Time: ϯϬ minutes.
2/8
Step 01:
HW1 Hex Bolt
(5.8x0.8x40mm)
x 8
HW4Screw
(Ø4x50mm)
x 16
HW6x 1
H
HW6
HW4
K
15mm
A
C
HW2
HW1

3/8
Step 02:
D
G
HW2 Hex Bolt
(5.8x0.8x30mm)
x 10
HW6
HW2
HW6 x 1

4/8
Step 03:
I

HW2
B
HW6
Step 04:
5/8
HW2 Hex Bolt
(5.8x0.8x30mm)
x 4
HW6x 1

6/8
Step 05:
HW2 x 16
HW6 x 1
Hex Bolt
(5.8x0.8x30mm)
HW3 x 4
HW2
HW6
HW2
x 4
HW3

7/8
Step 06:
J
F

8/8
Step 07:
HW5 x 24
Screw
(Ø4x30mm)
HW5
E

CARE AND MAINTENACE
NOTICE
Part List
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a soft lint free cotton clot dampened with water or furniture polish. On highly used
surfaces we recommend applying a quality paste wax which should be used on a regular basis
to provide additional protection from scratches and spills. How often you apply the wax
depends on how much wear furniture receives.
*Please make sure that you have all parts indicated before you begin assembly of this item
*This item should be assembled on a soft surface to prevent scratching the finish during assembly
*This item may require periodic tightening
Item#SFV4523
Product Dimensions (inch): 65-15/16"W x 90-3/8"D x 50"H
1/8
Weight Capacity: 800 Lbs
x 4
A
B
G
C
D
E
F
H
PIECE PICTURE QUANTITY
I
J
K
HW1
x 1
x 2
x 1
x 2
x 6
x 1
x 1
DESCREPTION
Legs
PIECE PICTURE QUANTITYDESCREPTION
x 3
x 8
x 30
x 2
x 2
x 8
x 18
x 4
Short middle legs
Long middle legs
Block "U"
Hex Bolt
(5.8x0.8x40mm)
Hex Bolt
(5.8x0.8x30mm)
Screws
(Ø4x50mm)
Screws
(Ø4x30mm)
Allen key
Headboard
Slats
Middle support bar
Side Drawers
Footboard
Side drawers
Drawers slot
HW2
HW4
HW5
HW6
HW3 x 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list if any part is missing or damaged. Do not attempt to
assemble the product.
Estimated Assembly Time: ϯϬ minutes.
2/8
Step 01:
HW1 Hex Bolt
(5.8x0.8x40mm)
x 8
HW4Screw
(Ø4x50mm)
x 8
HW6x 1
H
HW6
HW4
K
15mm
A
C
HW2
HW1