Safavieh Furniture Rafiki CNS5715 User manual

Item# CNS5715
Product Dimensions: 33.75''W x 13.75''D x 29.5''H
Weight Capacity: 40LBS
PIECE QUANTITY
A 1X
B 2X
C 4X
D 4X
E 4X
DESCRIPTION PICTURE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
* This item may require a pair of pliers to unscrew the screws to a suitable length during
assembly when feet are too short to fit into the item.
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and
avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should
be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a
regular basis to provide additional protection from sratches and spills. How often you apply
the wax depends on how much wear the furniture receives.
NOTICE
Part List
Table top
Shelf
Shorter screw legs
Longer screw legs
Foot Warning: Do not stand on the Table
Warning: Do not over torque bolts.

Step 1 Step 2 Step 3
Take all packaging off the table .Attached the Put the shelf(B) over the end of the legs adjust Slightly screw the four legs with long screw leg(D)
short screw legs(C) onto the table top(A). the legs so the screw holes on the legs are lined one by one through the shelf(B) to connect with
with the holes on the shelf. the short screw legs(C).
Step 4 Step 5 Step 6
Put the shelf(B) over the end of the legs adjust Screw the feet(E) one by one through the shelf (B) Turn the table up to right side, adjust the legs and
the legs so the screw holes on the legs are lined to the long screw legs (D). feet to make it stable.
with the holes on the shelf.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
2
1
3
5
4
6
A
CB
D
B E