Safavieh Outdoor Del Mar PAT6722 User manual

MODEL# PAT6722
Product Dimension: 22.05”W x 24.02”D x 34.65”H
NOTICE
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
Back
Seat
Right side
Left side
Support
Allen Bolt
Screw
Bolt extra
Allen Key
E
6X
M6x50
M4x35
M6x70
Warning : Do not torque bolts / screws
Warning : Do not stand on the chair
Weight capacity : 300 lbs

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
Step 1: attach left side (D) to the back (A). Then attach the
supports (E) as shown on the picture by using the Allen
Bolt (H1) and tighten it with the Allen Key (H4). Continue with
the right side (C) in the same way. Make sure to tighten all
bolts (H1) before you continue with step 2.
PREPARATION
Step 2: put the seat (B) inside the chair and use the screw (H2)
as shown on the picture, tighten all with a screwdriver.
12

PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
MODEL# PAT6722
Product Dimension: 35.43”W x 35.43”D x 29.53”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
Table top
Wrench
NOTICE
Leg
Lid
D
Warning : Do not torque bolts / screws
Warning : Do not stand on the table
Weight capacity : 40 lbs.

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Wrench.
Step 1: turn the table top (A). Then attach the 4 legs (B) as
shown on the picture.
PREPARATION
Step 2: use the wrench (C) to tighten all bolts as shown
on the picture.
2
1
D