Safavieh Outdoor FOX6707 User manual

3
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION
Step 1: attach the back (B) to the seat (A) by using the Allen
Nut (I1). Tighten with the Allen Key (I7) as shown on the picture.
Then attach the left side (D) to the back and seat by using the
Allen bolt S (I3) and the Allen bolt L (I2). Tighten with the Allen
key (I7) and wrench (I8) as shown on the picture.
Step 2: attach the right side (C) to the chair as shown on
the picture with the same hardware used with step 1.
Assembly the second chair in the same way .
1
2
I6
123
I1 I7
I1 I1
I6 I6
I1
I1
I8

Seat
Back
Right side
Left side
Part List and Hardware List
MODEL# FOX6707
Product Dimension: 61.81”W x 24.02”D x 33.66”H
PIECE DESCRIPTION PICTURE QUANTITY
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
2 x
2 x
2 x
2 x
1 x
1 x
1 x
1 x
4 x
4 x
12 x
4 x
I1
I2
I3
I4
6 x
I5
I6
I7
I8
1 x
2 x
1 x
Table top
Front bar
Left side
Suport bar
Rear bar
Allen Nut
Allen Bolt L
Allen Bolt S
Extra bolt
Allen Key
Wrench
Allen Screw L
Allen Screw S
M6x70
M6x70
M6x50
M6x70
M6x45
M6x50

Step 3: attach the front bar (G) to the support bar (H)
and the rear bar (F) by using the allen Screw(I5) as
as shown the picture.
Put the table top(E) and the support bars between the two
chairs as shown on the picture.Using the allen screw L (I4)
and allen Screw S(I5) to fix it .Tighten all allen Screws
with the Allen key(I7).
3
I7