Safavieh Outdoor Jorda PAT7518B User manual

Weight Capacity: 550 lbs
Warning : Do not stand on bench
Warning : Do not over torque bolts/ screws
NOTICE
Part List and Hardware List
A
B
C
D
Seat Frame
Leg
Allen key
1X
4X
2X
1X
Product Dimensions:54.33" W x 27.56" D x 30.31" H
Cushion Seat
Cushion Back
16X
1X
Socket screw
6 x 0.5 x 15 mm
HW1
HW2
QUANTITY
PIECE DESCRIPTION PICTURE Model# PAT7518
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove
wicker
furniture from standing water. Dust regularly with small brush or
vacuumSpills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach Leg (B) to Seat Frame (A). Use Bolt (HW1) tighten
with Allen Key (HW2).
Step 2
Like step 1 using Leg (B) is inserted into the Seat Frame (A). Use Bolt
(HW1) tighten with Allen Key (HW2).
HW1
HW2
HW1
HW2
HW1
HW1
B

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Put Back Cushion (C) and Seat Cushion (D) on the Bench.
The Bench is ready to be used.
Step 4
Caution: This Bench can only be used on a flat, level surface

Model# PAT7518
Product Dimensions:26.77" W x 27.56" D x 30.31" H
Weight Capacity: 275 lbs
Warning : Do not stand on chair
Warning : Do not over torque bolts/ screws
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Part List and Hardware List
E
B
F
G
HW1
Seat Frame
Leg
Allen key
1X
4X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Cushion Seat
Cushion Back
16X
1X
HW2
Socket screw
6 x 0.5 x 15 mm
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach Leg (B) to Seat Frame (E). Use Bolt (HW1) tighten
with Allen Key (HW2).
Step 2
Like step 1 using Leg (B) is inserted into the Seat Frame (A). Use Bolt
(HW1) tighten with Allen Key (HW2).
HW1
HW2
HW1
HW2
E
B
HW1
BHW1
B
HW1
B
E
B

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Put Back Cushion (F) and Seat Cushion (G) on the Chair.
The Chair is ready to be used.
Step 4
Caution: This Chair can only be used on a flat, level surface
F
G

Model# PAT7518
Product Dimensions:23.62 W x 39.37" D x 14.96" H
Socket screw
Weight Capacity: 40 lbs
Warning : Do not stand on table
Warning : Do not over torque bolts/ screws
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
H
ILeg
1X
4X
PIECE DESCRIPTION PICTURE QUANTITY
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Table Top
HW1
Allen key
16X
1X
HW2
K
6 x 0.5 x 15 mm
Glass table 1X
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach Leg (I) to Table Top (H). Use Bolt (HW1) tighten with
Allen Key (HW2).
HW1
Step 2
Put on Table glass (K) to complete Table
Caution : This Table can only be used on a flat, level surface.
K
HHW2
HW1
HW1 HW1
I
I
I
I
I