Safavieh Outdoor Warten PAT9026 User manual

ITEM NO.:PAT9026
ProductDimensions:
RHF&LHF seat: W50.98''*D27.6''*H27.6''
Corner Seat: W27.6''*D27.6''*H27.6''
Dining table: W31.7''*D31.7''*H27.6''
Bench: W39.4''*D14.2''*H12.6''
Weight Capacity：
RHF&LHF seat:：440lbs
Corner Seat：220lbs
Table：110lbs
Bench：440lbs
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
NOTICE
* Please make sure that you have all parts indicated before you begin
assembly of this item
* This item should be assembled on a soft surface to prevent scratching the
finish during assembly y
* This item may require periodic tightening

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
EstimatedAssemblyTime: 45 minutes.
Tools Required forAssembly(included):Allen Key
Corner Assemble
STEP 1
Gradually tighten bolts in a star pattern: tighten one bolt
and then the one opposite from it until all bolts are
tightened.
STEP 2
PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Corner seat
1
B
cushion
1
C
Back cushion
2
D
Rear Leg
∅35x320
1
E
Front
∅35x290
1
F
side leg
∅35x310
2
HW1
Bolt and washer
M6x35
12
HW2
Allenkey
1
Part List And Hardware List

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
EstimatedAssemblyTime: 45 minutes.
Tools Required forAssembly(included):Allen Key
LHF Seat Assemble
STEP 1
Gradually tighten bolts in a star pattern: tighten one bolt
and then the one opposite from it until all bolts are
tightened.
STEP 2
PIECE
DESCRIPTION
PICTURE
QUANTITY
C
Back cushion
2
D
Left rear Leg
∅35x320
1
E
Right front leg
∅35x290
1
F
Left front and
right rear leg
∅35x310
2
G
LHF Seat
1
H
Cushion
1
HW1
Bolt and washer
M6x35
12
HW2
Allenkey
1
Part List And Hardware List

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
EstimatedAssemblyTime: 45 minutes.
Tools Required forAssembly(included):Allen Key
RHF Seat Assemble
STEP 1
Gradually tighten bolts in a star pattern: tighten one bolt
and then the one opposite from it until all bolts are
tightened.
STEP 2
PIECE
DESCRIPTION
PICTURE
QUANTITY
C
Back cushion
2
D
Right rear Leg
∅35x320
1
E
Left front leg
∅35x290
1
F
Right front and
left rear leg
∅35x310
2
H
cushion
1
I
RHF Seat
1
HW1
Bolt and washer
M6x35
12
HW2
Allenkey
1
Part List And Hardware List

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
EstimatedAssemblyTime: 45 minutes.
Tools Required forAssembly(included):Allen Key
Bench Seat Assemble
STEP 1
Gradually tighten bolts in a star pattern: tighten one bolt
and then the one opposite from it until all bolts are
tightened.
STEP 2
PIECE
DESCRIPTION
PICTURE
QUANTITY
J
Bench seat
2
K
Leg
∅35x295
8
L
cushion
2
HW1
Bolt and washer
M6x35
24
HW2
Allenkey
1
Part List And Hardware List

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing
or damaged, do not attempt to assemble the product.
EstimatedAssemblyTime: 45 minutes.
Tools Required forAssembly(included):Allen Key
Table Assemble
STEP 1
Gradually tighten bolts in a star pattern: tighten one bolt
and then the one opposite from it until all bolts are
tightened.
STEP 2
PIECE
DESCRIPTION
PICTURE
QUANTITY
M
Table Top
1
N
Leg
∅35x665
4
HW1
Bolt and washer
M6x35
16
HW2
Allenkey
1
Part List And Hardware List