Safavieh PAT6749 Maintenance manual

Part List and Hardware List
MODEL# PAT6749
Product Dimension:
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench or table
Weight capacity bench : 600 lbs , Table : 40 lbs.
Table : 23.62”W x 23.62”D x 21.65”H
M6x90
M6x60
M4x15
M6x90
M6x40
M6x50
PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
D
E
F
G
Back
Seat
Left side
Right side
2x
2x
2x
2x
1x
2x
1x
4x
2x
H4
Table top
Table leg
Support bar
Allen screw L
Allen screw S
H1
H2
H3
H5
H6
H7
Allen nut
Allen screw
Screw
Extra bolt
Allen key
8x
8x
4x
1x
1x
PIECE DESCRIPTION PICTURE QUANTITY
Bench : 52.36”W x 24.02”D x 29.53”H

H1
H7
H1
H6
H6
H1
12
Step1: attach the Back(A) to the Seat (B) as shown on the Step 2: attach the Left side (D) to the Seat (B) and the
Back (A) as shown on the picture. Using the Allen nut
(H1) and Allen screw (H2) tighten by the Allen key (H7)
and Extra bolt (H6) as shown on the picture.
BA
H2
H2
H2
A
B
H1
H1
H1
D
the picture. Use the Allen screw (H2) tighten by using the
Allen key (H7) as shown on the picture.
BA
D
H1 H1
H1
H2
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
PREPARATION
H2
H7
H2

B
A
H2
C
H1
H1
H1
H2
H3
H3
H3
H1
H7
H1
H6
H6
H1
34
Step 4: Using the Screw (H3) to fix the back to the leg
and tighten by screw driver as shown on the picture.
Step 3: attach the Right side (E) to the Seat (B) and Back(A)
as shown on the picture. Using the Allen nut (H1) and Allen
screw (H2) tighten by the Allen key (H7) and Extra bolt (H6)
as shown on the picture.
H1
H1

5
Step 5: attach the Table legs (F) and Support bar (G) to the Table top (E) as shown on the picture.
Tighten each side by using the Allen screw L (H4) and Allen screw S (H5) with the Allen key (H7)
as shown on the picture .
H4H4
H4
H4
H4
H5
H5 A
B
B
C
H4
H4+H5
D3
H5
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
PREPARATION