Safavieh Randolph PAT7730 User manual

NOTICE
Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
This item may require periodic tightening.
lf you are having difficulty, our friendly Customer Care team is always here to help. Please
email
[email protected]
*
*
*
*
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
60 minutes.
Tools Required for Assembly (included):
Allen Key .
*
*
*
*
CARE AND MAINTENANCE
Weight Capacity : 176 lbs ( Table)
352 lbs (Single seat )
704 Ibs (Two person seat)
Warning : Do not stand on table/bench, chair
Warning : Do not over torque bolts
Model# PAT7730
Product Dimensions:
35.43"x 19.69"x H14.17" (Table)
25.20"x 27.56"x H27.16" (Chair)
48.03"x 27.56"x H27.16" (Bench)
1 Top Table Wooden 1X
2
3
4
5
6
7
8
9
CSH1
CSH2
CSH3
2X
1X
3X
3X
2X
2X
1X
1X
2X
1X
4X
Right Frame
Left Frame
Seat Chair Frame
Back Chair Frame
Seat Bench Frame
Back Bench Frame
Seat Chair Cushion
Seat Bench Cushion
Back Cushion
Support Table Frame
Leg Table Frame
DESCRIPTION
PIECE PICTURE QUANTITY
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing
water. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before
they harden or stain with a slightly dampened sponge. Do not use bleach solutions
HW1 Allen Bolt: M6 x 0.5 x 20 mm 12X
HW2 Allen Bolt: M6 x 0.5 x 30 mm 32X
HW3 44X
Flat Washer: M6 x 1 mm
HW4 2X
Allen Key
Part List and Hardware List

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
60 minutes.
Tools Required for Assembly (included):
Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
*
*
*
*
*
STEP 1: Connect Top Table Wooden (1) & Leg Table Frame (2),
tighten Bolt (HW1), Flat Washer (HW5) with Allen Key (HW6).
STEP 4: Connect Seat Chair Frame (6) & Right Frame (5), Left Frame (4), tighten Bolt
(HW2), Flat Washer (HW3) with Allen Key (HW4).
STEP 5: Connect The Part from STEP 4 & Back Chair Frame (7), tighten Bolt (HW2),
Flat Washer (HW3) with Allen Key (HW4).
2-4
50%
50%
50% 100%
STEP 2: Connect The Part from STEP 1 & Support Table Frame (3),
tighten Bolt (HW1), Flat Washer (HW3) with Allen Key (HW4).
STEP 3: Put the Table upright and make sure all legs are
level, then firmly tighten bolts with Allen Key (HW4), to
finish Table.
HW1
HW1
HW2
HW2
HW2
HW2
HW2
HW2
HW2
HW2
HW2
HW2
HW1
HW1
HW4
HW3 HW4
HW1
HW3
2
2
1
3
4
5
6
HW4
HW2
HW3
7
HW4
HW2
HW3
X2
50%
HW1
HW1
HW1
HW1
X2
X4 Bolt
X8 Bolt X4 Bolt
X6 Bolt

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
60 minutes.
Tools Required for Assembly (included):
Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
*
*
*
*
*
STEP 6: Put the Chair upright and make sure all legs are level, then firmly tighten
bolts with Allen Key (HW4), to finish Chair.
FINISH CHAIR STEP 8: Connect Seat Bench Frame (8) & Right Frame (4), Left Frame (5), tighten Bolt
(HW1), Flat Washer (HW3) with Allen Key (HW4).
STEP 7: Put on Seat Chair Cushion (CSH1) & Back Cushion (CSH3), to Chair . Stick
string to Back Chair & Seat Chair to finish Chair.
100%
50%
HW2
HW2
HW2
HW2
HW4
HW2
HW3
4
5
8
CSH1
CSH3
X2 X2
X2
X4 Bolt
3-4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
60 minutes.
Tools Required for Assembly (included):
Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
*
*
*
*
*
STEP 9: Connect The Part from STEP 8 & Back Bench Frame (9), tighten Bolt (HW2),
Flat Washer (HW3) with Allen Key (HW4).
STEP 11: Put on Seat Bench Cushion (CSH2) & Back Cushion (CSH3), to Bench . Stick
string to Back Bench & Seat Bench to finish Bench
STEP 10: Put the Bench upright and make sure all legs are level, then firmly tighten bolts
with Allen Key (HW4), to finish Bench.
50% 100%
HW4
HW2
HW3
FINISH BENCH
9
HW2
HW2
HW2
HW2
HW2
HW2
HW2
CSH2
CSH3
HW2
X8 Bolt
4-4