Safavieh Wilson PAT7731 User manual

NOTICE
Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
This item may require periodic tightening.
lf you are having difficulty, our friendly Customer Care team is always here to help. Please
email
[email protected]
*
*
*
*
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 60 minutes.
Tools Required for Assembly (included): Allen Key please adjust these hightlighted ones accordingly
*
*
*
*
CARE AND MAINTENANCE
Weight Capacity : 176 lbs ( Table)
352 lbs (Single seat )
705 lbs (Two person seat )
Warning : Do not stand on Table/Bench
Warning : Do not over torque bolts/screws
A 3X
B
C
D
E
F
G
H
I
3X
1X
1X
2X
2X
2X
4X
1X
4X
24X
14X
8X
DESCRIPTION
PIECE PICTURE QUANTITY
Part List and Hardware List
DESCRIPTION
PIECE PICTURE QUANTITY
HW4 22X
2X
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing
water. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before
they harden or stain with a slightly dampened sponge. Do not use bleach solutions
Model# PAT7731 -1/1
Product Dimensions
35.43"x19.68"x15.95"H (Table)
48.82"x26.38"x25.39"H (Bench)
26.38"x26.38"x25.39"H (Chair)
1-5
Left Leg Chair
Back Bench Frame
Seat Bench Frame
Back Chair Frame
Seat Chair Frame
Leg Table
Top Table
Right Leg Chair
CSH1
CSH2
Back Cushion
Screw: M8 x 0.5 x 70 mm
Screw: M6 x 0.5 x 35 mm
Allen Bolt: M6 x 0.5 x 50 mm
HW1
HW2
HW3
HW5
4X
1X
2X
Support Bench Frame
Support Chair Frame
J
Seat Bench Cushion
Seat Chair Cushion
CSH3
Allen Key
Flat washer: M6 x 1 mm

PART LIST:
Left Leg Chair (3 pcs)
A B C D
E F G H
I J
Right Leg Chair (3 pcs) Back Bench Frame (1 pc) Seat Bench Frame (1 pc)
Back Chair Frame (2 pcs) Seat Chair Frame (2 pcs) Support Bench Frame (2 pcs) Support Chair Frame (4 pcs)
Top Table (1pc) Leg Table ( 4 pcs)
CSH1 CSH2 CSH3
Seat Bench Cushion ( 1 pc) Seat Chair Cushion (2 pcs) Back Cushion (4 pcs)
2-5
HARDWARE :
HW1 HW2 HW3 HW4
HW5
Screw: M8 x 0.5 x 70 mm Screw: M6 x 0.5 x 35 mm Allen Bolt: M6 x 0.5 x 50 mm Flat washer: M6 x 1 mm
Allen Key

HW1
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 60 minutes.
Tools Required for Assembly (included): Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
*
*
*
*
*
3-5
50%
HW5
x6 Screw
50%
HW5
100%
STEP 1: Connect Left Leg Chair (A), Right Leg Chair (B),Back Bench Frame (C) &
Support Bench Frame (G) by tighten Screw (HW1) with Allen Key (HW5).
STEP 4: Put Seat Bench Cushion (CSH1) & Back Cushion (CSH3) to Finish Bench.
HW1
HW1
HW1
C
G
A
B
50%
HW5
D
STEP 2: Connect the part from Step 1 & Seat Bench Frame (D) by Hand.
STEP 3: Connect the part from Step 1 & Seat Bench Frame (D) by tighten Screw
(HW2), Flat Washer (HW4) with Allen Key (HW5).
HW2
HW2
HW4
x6 Screw
HW2
HW5
CSH 1
CSH 3
CSH 3

F
HW2
HW2
HW4
E
H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 60 minutes.
Tools Required for Assembly (included): Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
*
*
*
*
*
4-5
50%
HW5
50%
HW5
50%
HW5
100%
HW5
A
B
HW1
HW1
HW1
HW1
x6 Screw
STEP 5: Connect Left Leg Chair (A), Right Leg Chair (B),Back Chair Frame (E) &
Support Chair Frame (H) by tighten Screw (HW1) with Allen Key (HW5). STEP 6: Connect the part from Step 5 & Seat Chair Frame (F) by Hand.
x2 x2
x2
STEP 7: Connect the part from Step 5 & Seat Chair Frame (F) by tighten Screw
(HW2), Flat washer (HW4) with Allen Key (HW5).
CSH 3
CSH 2
STEP 8: Put Seat Chair Cushion (CSH2) & Back Cushion (CSH3) to Finish Chair.
x2
x4 Screw

I
J
HW3
HW4
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 60 minutes.
Tools Required for Assembly (included): Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
*
*
*
*
*
5-5
50%
HW5
X8 Bolt J
STEP 9: Connect Top Table (I) & Leg Table (J) by tighten Bolt (HW3), Flat washer
(HW4) with Allen Key (HW5).
STEP 10: Finish Table
100%
HW5