Safavieh PAT6754 User manual

MODEL PAT# 6754
Product Dimension: 58.27”W x 39.37”D x 32.87”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench
Weight capacity : 600 lbs
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
Leg
Side
Seat
Rear bar
2x
2x
A
B
C
D
2x
2x
E
Back
2x
Wrench
Allen Key
1x
1x
Front bar
F2x
Allen bolt S M6x45 4x
G2
Allen nut S M6x45
G1 6x
4x
G3 Allen bolt L M6x70
2x
G4 Allen nut L M6x90
G5
G6
G7
G8
Extra bolt
Screw 4x
1x
M4x35
M6x50

Step 1 : attach the side (B) to the back (D),rear bar (E) and front bar (F)
as shown on the picture. Then use the Allen nut S (G1) and the Allen
bolt S (G2) to tighten the side (B) to the back (D) and rear bar (E) .
Use the Allen bolt L (G3) to tighten the side the front bar (F) as shown
on the picture.
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION
2
1
Step 2 : attach the leg(A) to the back (D),rear bar (E) and front bar (F)
as shown on the picture. Then use the Allen bolt S (G2) to tighten the leg (A)
to the rear bar (E) .Use the Allen bolt L (G3) to tighten the leg to the front
bar (F) as shown on the picture.

Step 3: put the seat (C) to the bench as shown on the picture.
Then use the screw (G5) to tighten the seat (C) to the bench.
4
3
Step4 : repeat same step with other bench and connect 2 benches together as shown on the picture.
Then use the Allen nut L (G4) to tighten the back together as shown on the picture.Lock 2 benches by turn
on the bolt under seat to the hole as shown on the picture.
Remarks: Can change the corner bench from left to right just open the Allen nut (G4) , unlock the nut under seat and
replace by the Allen nut S(G1) . Move this bench to the other corner then assembly by the Allen nut L (G4) as shown on the picture.
Lock 2 benches by turn on the bolt under seat to the hole as shown on the picture.

MODEL# PAT6754
Product Dimension:33.46”W x 19.69”D x 29.13”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
Warning : Do not torque bolts / screws
Warning : Do not stand on the table
Weight capacity : 40 lbs.
NOTICE
Lock the leg to the top by turn on the bolt to the hole as shown on the picture.