Safe Fleet Prime Design FEA-0022 User manual

PRIME DESIGN, A SAFE FLEET BRAND
Address: 580 Opperman Drive, Eagan, MN 55123 ▪ Toll Free: 1.8.PRIME.RACK
Fax: [phone] ▪ Email: inf[email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
2
2
1
Flat Washer (8X)
FEA-0022 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CONTENTS OVERVIEW
1—Connecting Bar ................................................ (Qty 1)
60.00”
2—HKT-8404 ......................................................... (Qty 1)
Connecting Bar Feature Hardware Kit
M8 x 50MM (4X)
Lock Nut (4X)
Anti-Seize (1X)

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
3
A
B
A1
A2
B1
B2
FEA-0022 ASSEMBLY INSTRUCTIONS–CONNECTING BAR
CONNECTING BAR FRONT DRIVE SHAFT
1.1
2.1
2.3
1.2
2.2
CONNECTING BAR VARIATIONS
The 5' Connecting Bar can be adjusted
to t Crossbar spacings of 6'–8' on both
Left and Right Side Rotations.
Install Connecting Bar according to your
model's Crossbar spacing.
2.4
Torque to
90 in-lbs
NOTE: Connecting Bar is shown with
the RH Rotation features for illustrative
purposes only. These features are not
included with this Connecting Bar Kit,
and must be purchased separately.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
FEA-0022 ASSEMBLY INSTRUCTIONS–CONNECTING BAR
3
CONNECTING BAR FASTENERS
NOTE: This completes the assembling of FEA-0022.
If applicable, refer to your next FEA Assembly Manual.
If completed, refer back to your FBM Assembly Manual, and
resume assembling at Step 5.1.
WARNING: Failure to position the Crossbars as shown in your
FBM Assembly Manual may result in damage to the sliding
door and/or ladder rack.
USAM-FEA0022-US01 Rev-A 0619