Safe-Strap Shop-Along Harness Guide

SAFESTRAP.COM
©Copyright 2016 Safe-Strap Company, LLC. All rights reserved.
800.356.7796 973.442.4623 [email protected]
rev 2016/01-cjf
Make sure you have 2 Shop-Along Harnesses to install correctly.
Step 1: Step 2:
Step 3:
Find the crotch strap on the belt. Loosen and re-
move one screw from the bottom middle plate.*
Place the crotch strap (bottom strap) loop
through the bottom plate in the middle of the left
side seat. Tighten and replace the screws.
Find the 2 shorter ends of the harness (the side
pieces). These should be the only pieces not con-
nected yet. Make sure the buckles are facing outward
and that the text on the buckles is readable. Loosen
and remove one screw from the plate.* Insert loop of
the new belt under the plate. Tighten and replace the
screws. Repeat for right hand side of the harness.
Make sure the two buckles clip together.
Repeat for other side of the Shop-Along.
Final installation should look like this.
Find the 2 long pieces of the harness. Start with the
left hand side of the seat. Loosen and remove one
screw from the first plate. Insert loop of the new belt
under the plate. Tighten and replace the screws.*
Repeat for right hand side of the harness.
*For detailed instructions on removing screws and
plates see page 2.
Shop-Along® Harness Replacement
Instructions

Shop-Along® Harness Replacement
Instructions
Instructions for Use (IMPORTANT: Keep for future reference - Read Carefully)
If you have any questions please call Customer Service at 800-356-7796
Tighten loosened screw.
Replace removed screw and tighten.
Repeat for all 5 attachment points
Loosen and remove one screw. On the same plate, loosen the second screw,
but don’t remove it.
Remove old harness.
Insert loop on new belt under plate
SAFESTRAP.COM
©Copyright 2016 Safe-Strap Company, LLC. All rights reserved.
800.356.7796 973.442.4623 [email protected]
rev 2016/01-cjf