Sagem My203L User manual

USER MANUAL
My203L

INDEX
ANATOMY....................................................1
INSTALLATION............................................2
1. SIM Card...................................................................2
2. Battery.......................................................................3
BASICS........................................................7
1. Turn it on/off.............................................................7
2. Make a call ................................................................7
3. Answer a call.............................................................8
4. Display.......................................................................8
5. Text input.................................................................11
6. Phone lock ...............................................................11
7. Auto key lock...........................................................12
8. Language.................................................................13
MENU MAP................................................14
TECHNICAL INFORMATION.....................17
SAFETY INFORMATION............................19

1
ANATOMY
Left soft key
Right soft key
Navigation key
Call key
End key
Power on/off
Battery door
4pin slot

2
INSTALLATION
1. SIM Card
①. Push the hook of the battery door on the back
of phone.
②. Slide down and detach the battery door
③. Insert SIM card into the SIM slot in the right
direction.
Caution: Don’t bend or scratch your SIM card. Keep it away
from static electricity, water and dirt.

3
2. Battery
④. Connect the battery plug with the slot of phone.
Caution: The plug and slot have the direction and it
will be connected only in the right direction.
⑤. Lay the battery and close the door
Caution: New battery is not fully charged.
⑥. Connect the DC adapter with Phone and plug
the DC adapter into your power outlet.

4
⑦. Insert the plug of DC adapter into the slot of
Phone.

5
FCC RF Exposure
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in
conjunction with any other antenna or
transmitter.
Regulatory information / Disclaimers
Any changes or modifications (including the antennas)
made to this device that are not expressly
approved by the manufacturer may void the user’s
authority to operate the equipment. The
manufacturer is not responsible for any radio or
television interference caused by unauthorized
modification of this device, or the substitution of the
connecting cables and equipment other than
manufacturer specified. It is the responsibility of the user

6
to correct any interference caused by
such unauthorized modification, substitution or
attachment. Manufacturer and its authorized
resellers or distributors will assume no liability for any
damage or violation of government
regulations arising from failing to comply with these
guidelines.
For bady worn operation,this phone has been tested and
meets FCC RF exposure guidelines when
used with an accessory that contains no metal and that
positions the handset a minimum of 1.5cms
from the body.Use of other accessories may not ensure
compliance with FCC RF exposure
guidelines.

7
BASICS
1. Turn it on/off
To turn on your phone, press and hold
“End key” for a few seconds or until
the display turns on. If prompted, enter
your 4-digit PIN code.
Caution: If you enter an incorrect PIN code 3 times in a row,
your SIM card is disabled and your display shows SIM
Blocked. Contact your service provider.
To turn off your phone, press and hold “End key” for a
few seconds
2. Make a call
1) Enter phone number which you want to call.
2) Press “Call key” to make a call.
Tip: In some menus like Phonebook, Message, Call log, etc.
which have individual phone number, Press “Call key”
directly to make a call.

8
3. Answer a call
When your phone rings, just press “Call key”
If the phone mode is set to “Any Key Answer”, pressing any
key will answer to the coming call.
4. Display
The display shows when you turn on the phone
[Status indicator]
1) Signal strength indicator
- Vertical bars show the strength of the network connection.
Status indicators
Time & Date
Soft keys
PLMN
Greeting text
1 2 3 4 5 6 7 8

9
2) Network indicator
- Shows network status.
: In use of call
: Cannot make or receive calls
: Network forwarding
: Roaming (outside of your home area)
3) Phone lock indicator
- Shows when your phone is locked.
: Phone lock
4) Line connection
- Shows the line number which your phone is connected to.
: Line 1
: Line 2
5) Message indicator
- Shows when you receive a new message.

10
: Text message
: Voice message
6) Alarm indicator
- Shows when the alarm is active.
7) Ring-tone indicator
- Shows the current setting of ring-tone and vibration.
: Bell only
: Vibration only
: Vibration then bell
: Manner mode
8) Battery level indicator
- shows the battery charging level.
: Full battery
: Low battery

11
5. Text input
Text input is used for creating message, editing phonebook
entry, changing idle banner, etc.
zTo change the input mode, press Pound key(#) to
toggle in numeric mode, upper letter mode and lower
letter mode.
zTo input Symbol, press Star key(*) to go to symbol
mode.
zTo input common symbol, press 1 key to input several
common symbols.
Tip: If you want to input the different language with the
current language setting, you have to change “language”
setting first.
6. Phone lock
You can lock your phone to prohibit others from using the
Input mode

12
phone.
Phone lock is not SIM card lock nor SIM lock by the operator.
[Change Password]
Entering: “Left soft key” > “Security Setup”
> “Change Phone PW”
Tip: The original PW is “0000”
[Turn phone lock on/off]
Entering: “Left soft key” > “Security Setup”
> “Phone Lock”
Tip: If phone lock is on, you need to enter the phone PW,
whenever phone turn on.
[unlock the phone]
Press and hold “pound key” for a few second, then
enter your PW.
7. Auto key lock
You can lock your phone to prevent accidental key presses.
[Setting auto key lock]

13
Entering: “Left soft key” > “Security Setup”
> “Auto Key Lock”
[unlock key]
Pressing any key will pup up a window. And then press and
hold “pound key” for a few second.
8. Language
If the language setting is “Automatic”, It will depends on SIM
card setting.
Entering: “Left soft key” > “Settings” >
“Phone Settings” > “Language”

14
MENU MAP
1. Phone Book
1. Browse
2. Create
1. Save to SIM
2. Save to Phone
3. Memory Status
4. Speed Dial
5. Copy
1. From SIM Card To Phone
2. From Phone to SIM Card
6. Delete all entries
1. Delete All ME Entries
2. Delete All SIM Entries
7. Group
1. Family
2. Friends
3. Office
4. Others
8. My Number
2. Message
1. Write Message
2. Inbox
3. Outbox
4. Drafts
5. Voice Mail
1. Number
2. Delete

15
3. Connect to Voice Mail
6. Broadcast Message
1. Receive Mode
2. Languages
7. Message Settings
1. Service Center Number
2. Expire Period
3. Massege Type
4. Status Report
5. Alert Period
8. Template
9. Memory Status
3. Call Log
1. Incoming Call
2. Outgoing Call
3. Missed Call
4. Call Duration
4. Settings
1. Phone Settings
1. Clock Settings
2. Language
3. Answer Mode
2. Call Setup
1. Call Divert
2. Call Barring
3. Call Waiting
4. Auto Redial
5. Caller ID
6. Line Select
3. Network Setup
4. Factory Default

16
5. Security Setup
1. SIM PIN
2. Phone Lock
3. Auto Key Lock
4. Change Password
6. Tone
1. Tone Setup
1. Incoming Call
2. Message Tone
2. Volume
1. Call
2. Ring Tone
3. Keypad Tone
3. Ring Type
1. Bell
2. Vibrator
3. Vibrator& Bell
7. Display
1. Idle Display
1. Clock and Date
2. Idle Text
3. Wallpaper
2. Contrast
3. LCD Backlight
8. Accessories
1. Alarm
2. Calculator
3. Calendar
9. SIM Tool Kit