Sailrite Ultrafeed Manual

www.sailrite.com
Ultrafeed®
Wooden Base
#0481
Set Up Instructions *
UltrfeedWoodenBse
SetUpInstructions

AUltrfeed®WoodenBse
BRubberFeetforCseBottom
CScrewsforRubberFeet
DHinges
EFltHedWoodScrews
FScrewFltHed
StinlessSteelndWsher
forTippingMchineBck

1. Install Rubber Feet
• Turnthebseupsidedown
• PlcescrewsCthroughthe
centeroftherubberfeetB
• Screwthefeettothebsetechofthe
pre-drilledholesinthebsebottom
Besurethescrewsretightenedfully
sotheywon’tscrpeyourtbletop
2. Install Hinges
• InsertonehingeDintothehingecvity
onthetopoftheWoodenBse
• PlcescrewEthroughtheholein
thehingendscrewintothepre-
drilledholeprovidedtosecure
• Repetthisprocessforthesecondhinge

3. Install Screw Stop
ThisstophelpstoprotectthetopoftheWooden
BsewhenthemchineistippedbckThere
isnoneedforkickstndwiththisbse
• Plcescrewthroughthecountersunk
wsherndsecureFusingthepre-
drilledholenerthestorgecvity
4. Install Your Ultrafeed
• Loosenthetwosetscrewsonthe
undersideofthesewingmchinehed
ththoldthemchinetothehingesDo
notremovethescrewscompletely
• Onthebsetipthehinge
postsslightlyupwrd
• Liftupthesewingmchinehedndcrefully
guidethehingepostsintothehingeopenings
onthebcksideofthemchinehed
• Tipthemchinehedbcknduse
stubbyscrewdriverwithmediumhed
(notincluded)totightenthesetscrews
ontheundersideofthemchinehed