Saje Aroma art User manual

PLEASE READ AND SAVE
THIS MANUAL
ULTRASONIC NEBULIZER
Instruction Manual

ULTRASONIC NEBULIZER
ATOMISEUR ULTRASONIQUE
Live healthier by improving the
quality of air you breathe.

3
TABLE OF CONTENT
Benefits of Nebulizing
Diagram of Parts
Specifications
Operating Instructions
Cleaning & Maintenance
Cautions & Safety Instructions
Troubleshooting
Savings Coupon
1
2
3
4
6
7
9
10

1
BENEFITS OF NEBULIZING
Diffusing essential oils releases into your living space the
same tranquil qualities of negatively charged electric ions
that you experience being near the ocean, helping to relieve
feelings of stress, anxiety and low energy. Negative ions
are essential to our body for sustaining and improving
our general health; they fortify the immune system, increase
metabolism, strengthen the functions of the autonomic
nervous system and reinforce collagen.
Diffusing essential oils not only creates a pleasant atmo-
sphere, but it reduces allergies by removing dust particles,
toxins, and other airborne allergens, while stimulating
the mind and emotions through the sense of smell!

2
DIAGRAM OF PARTS
1. Cover
2. Water Tank
3. Unit Base
4. Maximum Water Level
5. LED Lights
6. Mist Setting Indicators
7. Mist Nozzle
8. Light Button
9. Mist Setting Button
10. Power Adaptor
11. DC Power Jack
12. Air Outlet
13. Transducer
14. Measuring Cup
8
10
14
9
5
412
11
7
6
1
2
3
13

3
SPECIFICATIONS
Product Name
aromaArt
Input Voltage
Output Voltage
Rating Power
Water Tank Capacity
Misting Duration
Dimensions
Net Weight
Materials
100 - 240 volts AC 50/60 HZ
18 Volts DC 500 mA
9 Watts
600 ml
190 mm (D) x 200 mm (H)
550 g with adaptor
ABS; PP
High: Approx. 12 hrs.
Low: Approx. 18 hrs.
Suitable area 10-15 m2

4
OPERATING INSTRUCTIONS
1. Connect power adaptor to DC
power jack on back of unit.
2. Remove the cover from the
unit base to expose water
reservoir.
3. Fill water tank with tap water
to no higher than max. water
level line (600 ml, approx.
15 mm below tank rim).
DO NOT EXCEED MAX.
WATER LINE (600 ML).
Please note: unit will shut off
automatically when water level
reaches the top of water sensor
pole; because of this, it is normal
for there to be a fair amount of
water left in the tank.

5
4. Add 10 drops of your favourite
Saje diffuser blend to the water.
5. Replace the cover and ensure
that it fits properly onto base.
6. Press the control buttons and select desired settings
Light button:
Controls 3 LED
lights on base of unit.
Mist setting button: Controls mist output levels
between low and high; the default output is
high when button is pressed once (both LED light
indicators will be illuminated); press a second time
for low mist setting (top LED indicator only will be
illuminated).

6
CLEANING & MAINTENANCE
1. Turn off unit and unplug
power adaptor.
2. Remove cover.
3. Empty water from left side
of unit. Do not empty water
from the air outlet side.
4. Use a soft cloth or clean swab to
clean the unit and transducer.
Transducer should be kept clean of
mineral deposits and other debris
for optimal misting. Never use any
sharp objects to clean transducer.
Air outlet

7
CAUTIONS & SAFETY INSTRUCTIONS
Only use the power adaptor supplied with the device.
Use only as described in this manual. To reduce the risk
of electric shock, do not attempt to service the device
in any way other than as described in the “Cleaning &
Maintenance” section of this manual.
Never operate the device if the power adaptor is damaged.
Always turn off and unplug the device during main-
tenance or when not in use.
When moving the device, hold the base of the device.
To prevent damage to the unit, only use tap water at
room temperature.
To prevent clogging and damage to the transducer,
always use clean water; replace tank water daily.
Do not move or shake the device during operation.
Do not try to remove any parts of the device during
operation.
•
•
•
•
•
•
•
•
•

8
Do not to touch the highly sensitive transducer with bare
fingers, or scrape it with metal tools (otherwise mist
output may be reduced).
Remove any liquid in the water tank after each use.
Do not attempt to repair the device yourself.
Always keep unit out of reach of small children and pets.
•
•
•
•

9
TROUBLESHOOTING
No power
The adaptor is not properly
plugged.
The mist on/off button is
not depressed.
No water or too little
water in the water tank.
The transducer is dirty.
Water is higher than the
max. water level line.
Excluding the above two
reasons, if the fan is work-
ing, check if the vent on
base is obstructed.
Depress the button again.
Fill water thank to max.
water line.
Clean the transducer.
Pour out the excess water.
Remove any obstacle on
the vent.
Plug in the adaptor correctly.
symptom possible cause solution
No mist
Reduced or
almost no
mist when
water tank
is full
- REV: FEB 2015 -

10