Saje aromaGeni User manual

Infuse your air with the vitality
and well-being of nature
ultrasonic nebulizer
atomiseur ultrasonique

table of contents
Benets of Nebulizing 1
Recommended Saje Diuser Blends 2
Product Features 3
Specications 4
Diagram of Parts 5
Operating Instructions 6-7
Care & Maintenance 8-9
Cautions 10-11
FCC & IC Statements 12-13
FAQ 14-15

1
benefits of nebulizing
Nebulizing is an easy, heat-free way to enjoy Saje’s 100%
natural diuser blends.
This ultrasonic technology combined with water and a
diuser blend, produces negative ions and aromas that
elevate your well-being.
When used with your favorite Saje diuser blend, the
nebulizer's refreshing cool mist brings nature's goodness
into your space, supporting balance and harmony.
Transform your surroundings with revitalizing air that's
reminiscent of fresh mist o a waterfall. Add the Saje
diuser blend of your choice and enjoy fresh, inviting
aromas any time.
soothing & relaxing diuser blends:

2
recommended saje diffuser blends:
Unwind / Tranquility / Stress Release
refreshing diuser blends:
Refresh / Exhale / Rain Forest
tranquil diuser blends:
Spa Spirit / Mountain High / After the Rain
revitalizing and energizing diuser blends:
Brainstorm / Energy
Use only Saje diuser blends; using other oils may result
in malfunction.

3
product features
• Uses an ultrasonic, heat-free system to disperse essential
oil molecules into the air.
• May also be used as a humidier.
• Digitally programmed to stop automatically.
• Energy ecient, whisper-quiet operation and auto
shut-o.
• Operates with inner cover light on or o.

4
specifications
Product Name aromaGeni
Input Voltage AC100-240V
Output Voltage DC24V +/-5%
Rating Power 12W
Water Tank
Capacity 1/3 cup (80 ml)
Misting Duration approx. 3 hours continuous
Mist Output approx. 4 tsp (+/- 1 tsp) or 20 ml
(+/- 5 ml) per hour on continuous
Settings continuous mist with light on or off
Light Options No LED button light, inner cover
LED light only
Coverage Area approx. 200-300 sq ft
Dimensions (D) approx. 4” x (H) 8” or
(D) 108 mm x (H) 205 mm
Net Weight approx. 9 oz (249 g)
Main Materials Outer Cover: PP; Water Tank: PP

5
diagram of parts
a. Outer Cover
b. Water Tank Cover
c. Air Outlet
d. LED Light
e. Maximum Water Level Line
f. Water Tank
g. Ceramic Disc
h. On/O Button
i. Power Adapter
j. DC Power Jack
k. Base
0
A
B
C
D
E
F
G
KH
I
J

6
1. Remove outer cover from the base and set aside.
4. Add 10-15 drops (depending on preference)
of your favorite Saje Diuser Blend to the water.
2. Remove the water tank cover.
operating instructions
1
2
3. Fill water tank with room
temperature tap water to no
higher than max. water level
line (1/3cup/80 ml).

7
6
7
5. Replace the water tank cover and then the outer
cover, ensuring they are securely in place.
8. Press button once for misting with inner light cover on, press
button twice for misting with inner light cover o. Press
button a third time to turn unit o.
9. Unit will turn o automatically when water in water tank
reaches minimum level (approx. 0-3 tsp OR 0-15 ml).
10. Unit will turn o automatically when water in water tank
reaches minimum level (approx. 0-3 tsp OR 0-15 ml).
Please note: Run times and amount of water left in the tank
after auto shut-o will vary due to climate, environment and
other factors.
6. Connect power adapter to DC
power jack at the back of unit.
7. Plug power adapter into electrical
outlet and press the button.

8
care & maintenance
• If the unit is knocked over while in operation, water could
leak into the internal mechanism of the unit; if this occurs,
unplug from power, empty water and let unit dry out in well-
ventilated area for at least 3days.
• Turn o unit and unplug from the power adapter prior
to cleaning.
• Remove cover and empty water from the water tank, carefully
avoiding the air outlet side.
• If required, use a clean, soft, damp cloth to wipe down
exterior of unit.
• Frequency of necessary cleaning is dependent upon usage
and types of diuser blends used (ie. how thick the essential
oils are in the diuser blend).
• To clean inside water tank, dispense a few drops of rubbing
alcohol into tank and wipe with a clean, soft cloth.
• To clean ceramic disc at bottom of water tank, dispense a
few drops of rubbing alcohol onto a clean cotton swab and
wipe clean.