5
1. Do stropního rastru vložte topný panel a opatrně ho
položte.
2. Ujistěte se, že je vypnut přívod el. proudu a skrz
sousední otvor připojete panel přes svorkovnici k
přívodu el. proudu.
MONTÁŽ
1. Vypněte přívod el. proudu a odpojte panel od přívodu
el. proudu.
2. Topný panel opatrně zdvihněte, otočte a vyndejte ze
stropního rastru.
DEMONTÁŽ
The installation, the power connection and the first operation of the appliance must be carried out by an individual
with the requisite qualifications.
These heating panels are designed to be mounted onto plywood false ceilings at a height of at least 1.8 m above
floor level and at a distance of at least 0.2 m from vertical structures. There must be at least 0.5 m of unobstruct-
ed air space below the heating panel measured from the vertical axes of the edges of the heating panel to ensure
free circulation of air and to prevent overheating of the unit.
PLACEMENT
• Assembly of and manipulation related to the heating panel must be carried out by qualified person. The heating
panel must be disconnected from the power source prior to work or manipulation with it. Care must be taken during
transport, manipulation and assembly of the heating panel as the material of the product is fragile.
• This appliance may be used by children age of 8 and up or people with impaired physical, sensory or mental abilities
or insufficient experience and knowledge only under supervision or if they have been instructed how to use the
appliance safely and they understand the potential risks associated with its use. Children must not play with the
appliance. Cleaning and maintenance carried out by the user must not be undertaken by unsupervised children.
• JIf the power connection is damaged, it must be replaced by the manufacturer, the manufacturer’s service
technician or a similarly qualified individual to prevent any risks.
• The heating panel is designed to be installed at a height of at least 1.8 m above floor level.
• Some parts of this product may be very hot and cause burns.
• This appliance is not equipped with a room temperature control device. Do not use this heating panel in a small
room if there are individuals present who are unable to evacuate the room by themselves and there is no constant
supervision.
• The manufacturer recommends connecting the appliance to a room temperature control device.
• The manufacturer recommends using gloves when working with the heating panel to prevent contamination of the
frame and front radiant areas of the heating panel.
CAUTION
The heating panel is designed to heat or maintain residential, commercial or industrial areas. The front side of the
heating panel is sandblasted and has a surface coating. It is a Class II appliance with IP 20 powered with 230V/50Hz.
The product is designed to be installed into plywood false ceiling and is manufactured in 3 forms depending on
different sizes of the plywood false ceiling (see the table). The installation must be carried out with the connection
cable disconnected from the power source.
PRODUCT DESCRIPTION
i
TYPE POWER (W) PANEL SIZE (mm) GRID SIZE (mm)
Ecora K 300 300 595 x 595 600 x 600
Ecora K 300b 300 615 x 615 618 x 618
Ecora K 700 700 1195 x 595 1200 x 600
