Salus HTRP230 User guide

INSTALLER MANUAL
Wired Digital Thermostat
Model: HTRP230

Contents of the box
Product Compliance and Safety Info
Manual Contents:
Box Contents
Introduction
Product Compliance and
Safety Information
Installation
User Interface
Status/LED indication
Installers notes
Warranty
Icons used in this manual:
Safety
Important info
Your benefit
Fixing Screws 1 x Installer Manual
INSTALLER MANUAL
Wired Digital Thermostat
Model: HTRP230
HRTP230 Thermostat
Product Compliance
SALUS Controls hereby declares that the product complies with the essential
requirements of the following EC Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet
address: www.saluslegal.com.
Safety Information
Use in compliance with safety regulations. The unit is to be used for the control of
room temperature inside the house.
Installation
This accessory must be fitted by a competent person, and installation must comply
with the guidance, standards and regulations applicable to the city, country or state
where the product is installed. Failure to comply with the relevant standards could
lead to prosecution.
2 HTRP230 Instruction Manual

Product Compliance and Safety Info
Product Compliance
SALUS Controls hereby declares that the product complies with the essential
requirements of the following EC Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet
address: www.saluslegal.com.
Safety Information
Use in compliance with safety regulations. The unit is to be used for the control of
room temperature inside the house.
Installation
This accessory must be fitted by a competent person, and installation must comply
with the guidance, standards and regulations applicable to the city, country or state
where the product is installed. Failure to comply with the relevant standards could
lead to prosecution.
HTRP230 Instruction Manual 3

Product Description
1. Mounting the Thermostat
Installing the unit
Thank you for purchasing the Salus HTRP230 Thermostat. This thermostat is a device
that lets you customize the heating and cooling of your home as needed.
The HTRP230 device from Salus Controls is a stylish and accurate digital room
thermostat that is fitted with a large easy to read LCD screen and one touch buttons.
You can now simply adjust your home temperature as desired in order to create a
comfortable home environment.
We hope you enjoy our product.
Install the HTRP230 digital room thermostat roughly about 1.5m above floor level. It
should be mounted in a location where the thermostat is easily accessible and away
from direct sunlight. You can mount the thermostat directly on the wall or you can
install it on top of a wall-box.
Gently remove front housing.
4 HTRP230 Instruction Manual

1. Mounting the Thermostat
Thank you for purchasing the Salus HTRP230 Thermostat. This thermostat is a device
that lets you customize the heating and cooling of your home as needed.
The HTRP230 device from Salus Controls is a stylish and accurate digital room
thermostat that is fitted with a large easy to read LCD screen and one touch buttons.
You can now simply adjust your home temperature as desired in order to create a
comfortable home environment.
We hope you enjoy our product.
Install the HTRP230 digital room thermostat roughly about 1.5m above floor level. It
should be mounted in a location where the thermostat is easily accessible and away
from direct sunlight. You can mount the thermostat directly on the wall or you can
install it on top of a wall-box.
Gently remove front housing.
Without floor sensor With floor sensor
HTRP230 Instruction Manual 5

2. Terminal Connection
N
N
L
CO
L
N
S1 ACTUATOR
OPTIONAL
EXTERNAL
PROBE
E.G.
HEAT
PUMP
OUTPUT
TO MULTIPLE
DEVICES
NSB
OUTPUT
230VAC
50Hz
N
CO
L
N
S1
Note: You can wire the thermostat directly to
the KL08NSB wiring centre or to an actuator
(purchased separatly).
6 HTRP230 Instruction Manual

3. Thermostat Icons
N
CO
L
N
S1
BOX means to select mode.
e.g. means Hi temp is selected
means the Hi temp is not selected.
Sunny: Hi comfortable temperature
Moon: Low comfortable temperature
Indicates AUTO ON or AUTO OFF
Frost Protection Indicator:
Frost protection is active, not available in cooling mode.
Indicates that the Party Mode is active
Indicates that the Holiday Mode is ON.
Heat Mode indicator: Indicates heating is running
HTRP230 Instruction Manual 7

4. Thermostat Icons Continued
5. Button Functions
Programs number indicator.
Indicates the time.
Indicates the the day of the week
Temporary override indicator:
The hand will appear until the next programs starting
Cool Mode indicator:
The icon is flashing when cooling mode is active
Temperature indicator
• Display the room temperature
• Display the set temp
8 HTRP230 Instruction Manual

5. Button Functions
Mode selection.
Long press to return home without saving.
OK key. Short press to confirm selection.
Long press to save and return home.
Long press to enter Temperature offset Heat/Cool.
Decrease or increase Setpoint Temperature.
OR
Note: LCD backlight is activated by pressing any key.
HTRP230 Instruction Manual 9

6. Setting Date and Time
6. Setting Date and Time
When you first power up your device you
will have to set up the date and time.
Press to
confirm.
Press or to
choose 12/24 hr
then press
to confirm.
3
1 2
4
10 HTRP230 Instruction Manual

6. Setting Date and Time
When you first power up your device you
will have to set up the date and time.
Set the hour
by using
or
Set the minutes
by using or .
Press to
confirm.
5 6
Set the date
using the
or . Press
to confirm.
7 8
Note: You can access the date and hour by long pressing . After that press
and to confirm. HTRP230 Instruction Manual 11

7. Setting Your Programs You can customise your programs by long
pressing when on the program screen.
3
2
4
1
Set the hour using
or . Press
to confirm. Repeat
the procedure for
setting the minutes.
Select the desired
program or
by pressing or .
Press to confirm.
Note: If you want to select another Program Profile (from the available 5), please enter
in Installer Mode, choose option d17 and after that select the desired program.
7. Setting Your Programs
Program Prole 1
12 HTRP230 Instruction Manual

You can customise your programs by long
pressing when on the program screen.
Select the desired
program or
by pressing or .
Press to confirm.
Note: If you want to select another Program Profile (from the available 5), please enter
in Installer Mode, choose option d17 and after that select the desired program.
7. Setting Your Programs You can select and customise
any of the following programs:
Program Prole 1
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 9:00 Moon Moon
3 16:00 Sunny Sunny
4 23:00 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:00 Sunny Sunny
2 23:00 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
HTRP230 Instruction Manual 13

7. Setting Your Programs
Program Prole 2
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 22:30 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:00 Sunny Sunny
2 23:00 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
7. Setting Your Programs
Program Prole 3
14 HTRP230 Instruction Manual

Program Prole 2
7. Setting Your Programs
Program Prole 3
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 5:00 Sunny Sunny
2 8:00 Moon Moon
3 14:00 Sunny Sunny
4 22:00 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:30 Sunny Sunny
2 22:30 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
HTRP230 Instruction Manual 15

7. Setting Your Programs
Program Prole 4
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 9:00 Moon Moon
3 15:00 Sunny Sunny
4 22:30 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:30 Sunny Sunny
2 23:00 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
7. Setting Your Programs
Program Prole 5
16 HTRP230 Instruction Manual

Program Prole 4
7. Setting Your Programs
Program Prole 5
5 days (Monday to Friday)
Program Program
Time Heat set point Cool set point
1 6:00 Sunny Sunny
2 10:00 Moon Moon
3 16:00 Sunny Sunny
4 23:00 Moon Moon
5 --:-- --:-- --:--
6 --:-- --:-- --:--
2 days (Saturday to Sunday)
Program Program
Time Heat set point Cool set point
1 7:30 Sunny Sunny
2 23:30 Moon Moon
3 --:-- --:-- --:--
4 --:-- --:-- --:--
5 --:-- --:-- --:--
6 --:-- --:-- --:--
HTRP230 Instruction Manual 17

8. How to reset the thermostat
9. Installer Mode
31 2
Press the indicated keys
together for 3 seconds.
Select P47 if you want to
reset to factory settings.
Press to confirm.
18 HTRP230 Instruction Manual
4 5
Press to confirm.

9. Installer Mode
Select P49 if you
want to enter
Installer Mode.
You have reached
the Installer Mode.
Select your option
by using or .
Press to confirm.
Press
to confirm.
Press the indicated
keys together for
3 seconds.
3
1 2
4
Note: This function allows you to customise your thermostat as you desire.
In order to do this please consult the tables on the next pages.
HTRP230 Instruction Manual 19

10. Functions explained
d05
dxx
d01
d02
d07
d08
d03
d04
Heating Control
Room temp. oset
Valve Protection
Frost Setpoint
OUT sensor probe (S1/S2)
Air sensor or Floor sensor
Cooling Control
0
-3.0Cto+3.0C
0/1
5ºC-17ºC
0
0
1
2
1
1
1
2
PWM (Pulse-width modulation)
Oset room temp measuring error (in 0.5ºC)
0 = VP disabled 1 = Enable
Out sensor probe not connected
A: if d03 = 0, IN sensor controls Tr
ON-OFF: 0.5ºC (± 0.25ºC)
F: if d03 = 0, IN sensor controlsTr
A: if d03 = 1, IN disabled and OUT controls Tr
ON-OFF: 1.0ºC (± 0.5ºC)
F: if d03 = 1, IN disabled and OUT controlsTr Floor Protection
Out sensor probe connected
ON-OFF: 0.5C (± 0.25ºC)
ON-OFF: 1.0C (± 0.5ºC)
0
0.0ºC
1
5.0ºC
0
0
2
D setting function Parameter/
Values
Default
value
Denition
10. Functions explained
20 HTRP230 Instruction Manual