Samsung ASSY MIM-H04UN Guide
Air conditioner
User & installation manual
Wi-Fi Kit 2.0 MIM-H04UN
• Thank you for purchasing this Samsung Product.
• Before operating this unit, please read this manual carefully and retain it for future reference.
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX YWX`TW]TX_GGG㝘䟸G\aX\aYW
2
Contents
Ɗɇ˙ʪϩцΧθʪʀɇЇϩͱϑ .................................................................................... ߤ
A˵ʪʀϑɵʪ˙ͱθʪÃϑϩɇɇϩͱ............................................................................. ߦ
Accessories............................................................................................5
ExternalDimensions...................................................................................5
Ãϑϩɇ˝ϩ˵ʪǮࣗçϩ................................................................................. ߧ
Wi-FiKitinstallation...................................................................................6
Settingtheindoorunittenantsforeachuser...........................................................12
CheckingtheWi-FiKit.................................................................................15
Initializingtheuserdata...............................................................................16
UpdatingwithaMicroSDcard.........................................................................16
ƊɇθϩƟ˵˝ϑɇΧΧ ......................................................................................ߢߨ
Checkingthepowerconnections ......................................................................17
SettingupandconnectingtoaWi-Fiaccesspointusingyoursmartphone...............................17
DownloadingtheSmartThingsappandregisteringyourSamsungaccount..............................18
ConnectingtheSmartThingsapptoyourproduct.......................................................18
Ɗϩɇθϩ˝ϩ˵ʪϑцϑϩʪɇθʀͱʒϩͱʪθɇΧΧ ...............................................................ߣߡ
Controllingtheairconditioner.........................................................................20
ƟθͱЇɵʪϑ˵ͱͱϩ˝ ..................................................................................... ߣߢ
ƊΧʪʀѣʀɇϩͱϑ........................................................................................ߣߤ
ĮΧʪƊͱЇθʀʪͱЇʀʪʪϩ .........................................................................ߣߤ
ŵʪ˙ʪθʪʀʪ............................................................................................ߣߥ
AɇЇϩͱɇɵͱЇϩߦ²іθɇ˝ʪθɇʒͱʪαЇΧʪϩ...........................................................ߣߦ
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGY YWX`TW]TX_GGG㝘䟸G\aX\aYW
3
ENGLISH
Safety precautions
California Proposition 65 Warning (US)
ǮŵĘÃĘ Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This installation manual explains how to install a Wi-Fi Kit to an indoor unit of Samsung system air
conditioners.
Read the installation manual thoroughly before installing the Wi-Fi Kit.
(Refer to the appropriate manual for installing product or other optional parts.)
ǮŵĘÃĘ Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION Hazards or unsafe practices that may result in minor personal injury or property
damage.
WARNING
• Contact service center for installation.
- Ɵ˵ʪθʪϑɇθϑͱ˙ΧθͱʒЇʀϩɇ˙Їʀϩͱࡡиɇϩʪθʪɇɇ˝ʪࡡʪʪʀϩθʀϑ˵ͱʀͱθѣθʪࢋ
• Install the Wi-Fi Kit securely in a place that can withstand the weight of the product.
- If the installation location is not strong enough, Wi-Fi Kit may fall and be damaged.
• Connect the powerwith rated voltage when installing.
- Ã˙ͱϩࡡϩ˵ʪθʪϑθϑͱ˙ѣθʪͱθʒɇɇ˝ʪϩͱϩ˵ʪǮࣗçϩࢋ
• Do not attempt to move or re-install the Wi-Fi Kit that is already installed.
- Ɵ˵ʪθʪϑθϑͱ˙ʪʪʀϩθʀϑ˵ͱʀɇʒѣθʪࢋ
• Do not attempt to modify or repair the Wi-Fi Kit on your own.
- Ɵ˵ʪθʪϑΧͱϩʪϩɇθϑͱ˙ΧθͱʒЇʀϩʒɇɇ˝ʪࡡʪʪʀϩθʀϑ˵ͱʀͱθѣθʪࢋǮ˵ʪθʪΧɇθϑʪʪʒʪʒࡡʀͱϑЇϩϑʪθЭʀʪ
center.
• Check if the installation was done properly according to the installation manual.
- Ã˙ϩ˵ʪǮࣗçϩϑϑϩɇʪʒʀͱθθʪʀϩцࡡϩ˵ʪθʪϑθϑͱ˙ʪʪʀϩθʀϑ˵ͱʀͱθѣθʪࢋ
• đɇʪϑЇθʪϩ˵ɇϩɇиθ˝иͱθϑʒͱʪɵцɇαЇɇѣʪʒΧʪθϑͱʀͱΧц˝иϩ˵θʪ˝ͱɇϑϩɇʒɇθʒϑɇʒ
instructions in this manual.
- Ã˙ϩ˵ʪϑϩɇɇϩͱϑʒͱʪɵцЇαЇɇѣʪʒΧʪθϑͱࡡϩ˵ʪθʪϑθϑͱ˙ΧθͱʒЇʀϩɇ˙Їʀϩͱࡡʪʪʀϩθʀϑ˵ͱʀͱθѣθʪ
caused by incorrect installation.
• Contact the service center if you need to dispose the Wi-Fi Kit.
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGZ YWX`TW]TX_GGG㝘䟸G\aX\aYW
4
Safety precautions
CAUTION
• Uͱͱϩϑϩɇϩ˵ʪΧθͱʒЇʀϩɇΧɇʀʪи˵ʪθʪϩϑͱθ˝˵ϩɵʪʪуΧͱϑʪʒϩͱѤɇɇɵʪ˝ɇϑʪɇɇ˝ʪࢋ
- Ɵ˵ʪθʪϑθϑͱ˙ѣθʪͱθʪуΧͱϑͱࢋ
• Do not install the product in a place where it will be exposed to oil orvapor etc.
- If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product
may get damaged or product may function abnormally.
• Make sure that water does not get into the Wi-Fi Kit.
- Ɵ˵ʪθʪϑθϑͱ˙ʪʪʀϩθʀϑ˵ͱʀɇʒѣθʪࢋ
• Make sure there is no tension to the cable during installation.
- Aɇɵʪɇц˝ʪϩʀЇϩɇʒʀɇЇϑʪѣθʪࢋ
• Install the product in a place with temperature between 0 °C~39 °C (32 °F~102 °F) with no direct sunlight.
- If not, there is risk of electric shock or abnormal operation.
• Do not install the product in a place where special spray or acid/alkali solution is used.
- There is risk of electric shock or abnormal operation.
• Do not press the buttons with sharp objects.
- There is risk of electric shock or damaging the parts.
• Do not connect the power cable to the communication cable terminal.
- Ɵ˵ʪθʪϑθϑͱ˙ѣθʪࢋ
• When installing the product in hospitals or other places, make sure that the product does not interrupt
with other products.
- Abnormal operation may occur.
• This wireless device has a possibility of radio wave interference during operation.
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGG[ YWX`TW]TX_GGG㝘䟸G\aX\aYW
5
ENGLISH
Checks before Installation
Accessories
Wi-Fi Kit Aɇɵʪϩʪϑ࣍ߣ࣎ AɇɵʪʀɇΧϑ࣍ߤ࣎ đߥߢߧϑʀθʪиϑ࣍ߦ࣎
User & installation manual ƸࣗϩцΧʪϩʪθɇϑ࣍ߧ࣎
• Ɵ˵ʪǮࣗçϩЇϑϩɵʪϑϩɇʪʒɵцɇʀʪθϩѣʪʒϩʪʀ˵ʀɇࢋ
• Before installation, be sure to cut off power.
• Follow applicable rules for electrical wiring. Make sure that the cables of the Wi-Fi Kit are installed
inside a wall or covered to avoid being touched by the occupant.
External Dimensions
185 (7.28) 29 (1.14)
130 (5.11)
[Unit : mm (inch)]
CAUTION
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGG\ YWX`TW]TX_GGG㝘䟸G\aX\aYW
6
Installing the Wi-Fi Kit
Wi-Fi Kit installation
• To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router
that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are
potentially interfering elements between them, it may cause problems with the performance of the
Wi-Fi Kit that cannot be resolved by customer services.
• ťɇʀʪϩ˵ʪǮࣗçϩɇɇθʪɇи˵ʪθʪцͱЇʀɇʪɇϑцΧθʪϑϑϩ˵ʪťɵЇϩϩͱ˙ͱθʒʪЭʀʪЭʪθѣʀɇϩͱࢋ
• Do not install the Wi-Fi Kit in an area where it may be exposed to moisture or impact.
• Operating temperature: 0 ~ 40 °C (32 ~ 104 °F), Operating humidity: 30-90 % (relative)
1. ƸϑʪɇѤɇϩ˵ʪɇʒϑʀθʪиʒθЭʪθϩͱϩЇθʪɇʀ˵ͱ˙ϩ˵ʪϑαЇɇθʪ˵ͱʪϑɇϩϩ˵ʪͱиʪθΧɇθϩͱ˙ϩ˵ʪǮࣗçϩɇʒθʪͱЭʪ
the back cover.
࢘Push both latches at the same time.
• ƸϑʪɇѤɇϩ˵ʪɇʒϑʀθʪиʒθЭʪθϩͱϩЇθϩ˵ʪθʪʀϩɇ˝Їɇθ˵ͱʪɇϩϩ˵ʪЇΧΧʪθ
Χɇθϩͱ˙ϩ˵ʪѣу˝˵ͱͱ˙ͱθʪɇϑцθʪͱЭɇࢋ
2. Arrange the power and communication cables along the back cover.
15 cm (6 inch)
Ǯθʪϑϑϩɇʪʒͱϩ˵ʪиɇ Ǯθʪϑϑϩɇʪʒϩ˵ʪиɇ
10 cm (4 inch)
If necessary, remove
this part to secure
more space for wiring.
CAUTION
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGG] YWX`TW]TX_GGG㝘䟸G\aX\aYW
7
ENGLISH
3. Ƹϑʪϩиͱͱθͱθʪϑʀθʪиϑϩͱѣуϩ˵ʪɵɇʀʀͱЭʪθϩͱϩ˵ʪиɇࢋAͱʪʀϩϩ˵ʪΧͱиʪθʀɇɵʪϑ࣍ǤߢࡡǤߣ࣎ɇʒ
communication cables (F1, F2) to the terminals on the back of the front coverwhile adjusting to a suitable
length.
4. Ǯ˵ʪʀͱʪʀϩ˝ϩ˵ʪΧͱиʪθʀɇɵʪϑϩͱǤߢɇʒǤߣࡡ˙ɇϑϩʪϩ˵ʪťA9ϩʪθɇϑʀθʪиϑ࣍AĘߦ࣎ϩͱɇϩͱθαЇʪͱ˙ߧ
Ęࡔʀͱθʪϑϑࢋ
Ɗʀθʪиϑіʪࡠđߤуߧ
• You can connect up to 16 indoor units to a Wi-Fi Kit.
ߣ Ǥߣ Ǥߤߤ ߥ ߦ
庢
庥度
ⓐ
庤
庣
10 (0.4)
and over
10 (0.4) and over
50 (2) and over
10 (0.4) and over
Screw
holes
࢘Be sure to secure space of at least
10 mm (0.4 inch) (up/right/left)
and 50 mm (2 inch) (down)
around the back cover before
ѣу˝ϩ˵ʪɵɇʀʀͱЭʪθͱϩ˵ʪиɇࢋ
࢘Fix the screws to the
screw holes.
࢘Do not over-tighten the PCB
terminal.
ǤߢǤߣߢߣ
Wi-Fi Kit
PCB port
Indoor unit
[Unit : mm (inch)]
Back over
Item Contents Item Contents
庡Power/communication terminals 庤LED
庢Tracking/Reset button 庥Ęʪϩиͱθť9
庣Micro SD card slot 度Interface module PBA
5. Assemble the Wi-Fi Kit again.
• Ãϑʪθϩϩ˵ʪ˙θͱϩʀͱЭʪθϩͱϩ˵ʪЇΧΧʪθ˝θͱͱЭʪϑɇϑϑ˵ͱиϩ˵ʪѣ˝Їθʪࢋ˙ϩʪθɇϑϑʪɵцࡡɇʪ
sure that there is no gap between the covers.
NOTE
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGG^ YWX`TW]TX_GGG㝘䟸G\aX\aYX
8
Installing the Wi-Fi Kit
Wi-Fi Kit wiring diagram
1) Connecting to a single outdoor unit (F1-F2)
F1 F1 F1 F1 F1 ǤߢǤߢ F1F2 F2 F2 F2 F2 ǤߣǤߣ F2R1 R2
<Connection between the Wi-Fi Kit and multiple units>
F1 F1 ǤߢǤߢ F1F2 F2 ǤߣǤߣ F2
<Connection between the Wi-Fi Kit and a single unit>
Aͱʪʀϩ˝ɵʪϩиʪʪϩ˵ʪǮࣗçϩɇʒkŵǤʒʪЭʀʪϑ
AĘߦ
AĘߥ
ŵkU
AĘߤ
9øç
F1 F1 F1 F1 F1 ǤߢǤߢǤߢǤߢ F1F2 F2 F2 F2 F2 ǤߣǤߣǤߣǤߣ F2R1 R2
đÃđࣗĘߢߡ
࣍AĘߥࡡ9Їʪ࣎ ࣍AĘߤࡡŵʪʒ࣎
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGG_ YWX`TW]TX_GGG㝘䟸G\aX\aYX
9
ENGLISH
2) Connecting to multiple outdoor units (R1-R2)
F1 F1 F1 F1 F1 ǤߢF1
F2 F2 F2 F2 F2 ǤߣF2R1 R2 R1 R2 F2F1 F1 F2
Ǥߢ Ǥߣ F1 F2
Touch centralized
controller
DMS
- Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit.
- Aͱʪʀϩϩ˵ʪΧͱиʪθʀɇɵʪϑϩͱǤߢɇʒǤߣͱ˙ϩ˵ʪʒͱͱθЇϩࢋ
- Other controllers (e.g. touch centralized controller, DMS) can be installed together.
• You can connect up to 16 indoor and outdoor units.
CAUTION
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGG` YWX`TW]TX_GGG㝘䟸G\aX\aYY
10
Installing the Wi-Fi Kit
ߤ࣎Aͱʪʀϩ˝ϩ˵ʪǮࣗçϩɇʒϩ˵ʪkŵǤϩͱ˝ʪϩ˵ʪθ࣍ŵߢࣗŵߣ࣎
AĘߦ
AĘߥ
ŵkU
AĘߤ
9øç
F1 F1 F1 F1 F1 Ǥߢ F1
F2 F2 F2 F2 F2 Ǥߣ F2R1 R2 R1 R2
Ǥߢ Ǥߣ F1 F2
ǤߢǤߢ ǤߣǤߣ
Touch
centralized
controller
DMS
đÃđࣗĘߢߡ
- Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit.
- Aͱʪʀϩϩ˵ʪΧͱиʪθʀɇɵʪϩͱǤߢɇʒǤߣͱ˙ϩ˵ʪʒͱͱθЇϩͱθkŵǤࢋ
- Other controllers (e.g. touch centralized controller, DMS) can be installed together.
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGXW YWX`TW]TX_GGG㝘䟸G\aX\aYY
11
ENGLISH
࢘ͱθʒͱͱθЇϩϑиϩ˵ͱЇϩǤߢɇʒǤߣʀͱʪʀϩͱϩʪθɇϑࡡЇϑʪϩ˵ʪʪуϩʪθɇʀͱϩθͱʪߣ˙ͱθƊƸ9ť9
࣍ϑʒʪϩ˵ʪʒͱͱθЇϩ࣎˙ͱθߢߣǤUAΧͱиʪθϑЇΧΧцࢋ
BLK
Connect the BLK line (black)
ϩͱǤߣ
Įŵ
Connect the ORG line
࣍ͱθɇ˝ʪ࣎ϩͱǤߢ
F1 F1 F1 F1 F1 Ǥߢ
Ǥߢ࣍Įŵ࣎
F1F2 F2 F2 F2 F2 Ǥߣ
Ǥߣ࣍9øç࣎
F2R1 R2
Aͱʪʀϩͱɵʪϩиʪʪϩ˵ʪǮࣗçϩϩͱɇϑцϑϩʪиϩ˵ͱЇϩǤߢɇʒǤߣ
• When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on
the wall.
• Upon wiring, use the provided U-type terminals (#16-22). When there are no terminals provided or
ࢄߣߥϑЇϑʪʒࡡцͱЇʀɇЇϑʪɇцƸࣗϩцΧʪϩʪθɇϑϩ˵ɇϩʪʪϩϩ˵ʪϑΧʪʀѣʀɇϩͱϑࢋ
• Wi-Fi Kit communication and power cables
- Ǯ˵ʪϑϩɇ˝ϩ˵ʪǮࣗçϩࡡ˙ͱͱиϩ˵ʪиθ˝ϑΧʪʀѣʀɇϩͱϑ˙ͱθϩ˵ʪƸࣗϩцΧʪϩʪθɇࢋ
- Ǯ˵ʪϑϩɇ˝ϩ˵ʪǮࣗçϩиϩ˵ɇߥࣗиθʪťǤAʀɇɵʪࡡѣθϑϩΧʪʪͱ˙˙ϩ˵ʪťǤAʪʒ˝ʪ
(approx. 30 cm (11.8 inch)). (AWG22 recommended)
• ƸࣗϩцΧʪϩʪθɇϑΧʪʀѣʀɇϩͱϑ˙ͱθϩ˵ʪǮࣗçϩťA9
k
ʒʒߤǮ
ϩ
ø
Cable range Rated
ϑіʪ
Stud
ϑіʪ Uʪ˙ɇЇϩϑіʪࣄ࣍ʀ˵࣎ࣅ
Ǯ mm²
࣍ʀ˵ࠟ࣎
mm²
࣍ʀ˵ࠟ࣎
mm
࣍ʀ˵࣎ tdEFWL
24 - 16
0.25
- 1.65
(0.0003
- 0.0025)
1.5
(0.0023)
3 - 3.2
(0.1181
- 0.1259)
0.6 - 0.8
(0.0236
-
0.0314)
1.2 - 2.5
(0.0472
-
0.0984)
4 - 6
(0.1574
-
0.2362)
5 - 9
(0.1968
-
0.3543)
5 - 7
(0.1968
-
0.2755)
12 - 21.2
(0.4724
-
0.8346)
Max. length for communication/power cables: 50 m (164 ft)
• ɇϑϩʪϩ˵ʪťA9ϩʪθɇиϩ˵ѣу˝ϑʀθʪиϑϩͱɇϩͱθαЇʪͱ˙ߧĘ࡙ʀͱθʪϑϑࢋǮ˵ʪцͱЇ˙ɇϑϩʪϩ˵ʪ
ϑʀθʪиϩͱɇϩͱθαЇʪͱЭʪθߧĘ࡙ʀࡡϩɇцʀɇЇϑʪʒɇɇ˝ʪϩͱϩ˵ʪϑʀθʪиϩ˵θʪɇʒࢋ
CAUTION
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGXX YWX`TW]TX_GGG㝘䟸G\aX\aYY
12
Installing the Wi-Fi Kit
6. Activate the Wi-Fi Kit.
• When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely.
• After the system operates, tracking is performed automatically.
7. Tracking
࢘Tracking: The Wi-Fi Kit detects connected indoorunit(s) and the indoor unit(s) detects the connection to the Wi-Fi
Kit. Tracking is required to monitor or control the system airconditioner using the Wi-Fi Kit.
• The Wi-Fi Kit automatically performs tracking when activated. The ( ) ( ) indicators on the Wi-Fi Kit
blink while in tracking.
• When no indoor unit is detected by tracking, the ( ) indicator blinks for10 seconds and the Wi-Fi Kit
attempts tracking again. In this case, make sure that the communication cables between the indoor and
outdoor units are connected properly.
• When any change in the installation of indoor and outdoor units occurs, manually run the tracking by
pressing the (SW3, 庢-) button inside the Wi-Fi Kit.
• When tracking is completed but all the connected indoorunits have the central control option
disabled, the ( ) indicator illuminates for10 seconds and the ( ) indicator blinks. Then the Wi-Fi Kit
attempts tracking again. In this case, check and change the central control option forindoor units.
When the central control option is disabled, you cannot control indoor units via the Wi-Fi Kit.
• To control indoorunits by using a mobile phone, wait until the tracking is completed and then connect
the Wi-Fi Kit to a wireless router.
• The ( ) indicator does not turn off until the Wi-Fi Kit is connected to a wireless routerafter tracking.
Setting the indoor unit tenants for each user
• The multi-tenants feature allows you to control and monitorthe indoor units with the group channel
address (RMC1) that is the same as that of the Wi-Fi Kit.
In order to selectively use the indoor units connected to a single outdoor unit by multiple users,
you can install multiple Wi-Fi Kits and group the indoor units by setting the group channel address (RMC1) for
each Wi-Fi Kit.
ƊࣗĘkƟΧθͱߣ
Setting the group channel
address (indoor unit) and
tenant address (Wi-Fi Kit) Tenant address 1
Hair salon Café Grocery store
Tenant address 2 Tenant address 3
Group channel address 1 2 3
CAUTION
NOTE
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGXY YWX`TW]TX_GGG㝘䟸G\aX\aYZ
13
ENGLISH
1. Install a separate Wi-Fi kit for each group. Example: if you have 3 separate groups/tenants, you must
install 3 Wi-Fi kits.
• You can connect up to 16 Wi-Fi Kits to a single outdoor unit.
• When installing multiple Wi-Fi Kits, connect and perform tracking one by one.
࣍ͱθʪуɇΧʪࡡʀͱʪʀϩɇʒΧʪθ˙ͱθϩθɇʀ˝ͱǮࣗçϩࢄߢʀͱʪʀϩɇʒΧʪθ˙ͱθϩθɇʀ˝ͱǮࣗ
çϩࢄߣࢋࢋࢋʀͱʪʀϩɇʒΧʪθ˙ͱθϩθɇʀ˝ͱǮࣗçϩࢄߢߧࢋ࣎
• If you connect multiple Wi-Fi Kits and perform tracking on them at the same time, you will not get
reliable results.
• A single Wi-Fi Kit can be connected to 16 indoor units at most.
• You can rename each Wi-Fi Kit via a smartphone.
However, you cannot change the names for other smart phones connected to the same Wi-Fi
adapter.
2. Ƹϑʪϩ˵ʪǮࣗçϩϑʪϩϩ˝ϑͱϩ˵ʪʒʪʒʀɇϩʪʒϑϩɇɇϩͱΧθͱ˝θɇ࣍ƊࣗĘkƟΧθͱߣ࣎ϩͱϑʪϩϩ˵ʪϩʪɇϩɇʒʒθʪϑϑʪϑ
for each Wi-Fi Kit.
幩
幪
幫
幬
CAUTION
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGXZ YWX`TW]TX_GGG㝘䟸G\aX\aYZ
14
Installing the Wi-Fi Kit
ߢ࣎ťθʪϑϑϩ˵ʪࣄƊʪɇθʀ˵ࣅɵЇϩϩͱϩͱѣʒϩ˵ʪʀͱʪʀϩʪʒǮࣗçϩϑࢋ
2) One by one, select the MAC address for each Wi-Fi Kit from the list.
- You can see the MAC address on the label inside the Wi-Fi Kit.
đAǹǹǹǹǹǹǹ
3) Set the tenant address. (Unavailable, 0-F)
- Ɗʪʪ˝ϩ˵ʪϩɇɵʪɵʪͱиࡡʪϩʪθϩ˵ʪϩʪɇϩɇʒʒθʪϑϑͱϩ˵ʪƊࣗĘkƟΧθͱߣࢋ
Tenant address θͱЇΧʀ˵ɇʪɇʒʒθʪϑϑ˙ͱθϩ˵ʪʒͱͱθЇϩϑʀͱϩθͱʪʒɵцɇǮࣗçϩ
Unavailable Controls all indoor units connected to the outdoor unit
0 Controls the indoor units with the group channel address “0"
1 Controls the indoor units with the group channel address “1"
2 Controls the indoor units with the group channel address “2"
3 Controls the indoor units with the group channel address “3"
4 Controls the indoor units with the group channel address “4"
5 Controls the indoor units with the group channel address “5"
6 Controls the indoor units with the group channel address “6"
7 Controls the indoor units with the group channel address “7"
8 Controls the indoor units with the group channel address “8"
9 Controls the indoor units with the group channel address “9"
A Controls the indoor units with the group channel address “A"
B Controls the indoor units with the group channel address “B"
C Controls the indoor units with the group channel address “C"
D Controls the indoor units with the group channel address “D"
E Controls the indoor units with the group channel address “E"
F Controls the indoor units with the group channel address “F"
- ʪࢋ˝ࢋ Ǯ˵ʪцͱЇϑʪϩϩ˵ʪϩʪɇϩɇʒʒθʪϑϑͱ˙ɇǮࣗçϩϩͱߣϩ˵θͱЇ˝˵ϩ˵ʪƊࣗĘkƟΧθͱߣࡡ
the Wi-Fi Kit can control and monitorthe indoor units with the RMC1 set as 2.
ߥ࣎Ɗʪʪʀϩϩ˵ʪࣄΧΧцࣅɵЇϩϩͱϩͱϑɇЭʪϩ˵ʪϑΧʪʀѣʪʒϩʪɇϩɇʒʒθʪϑϑ˙ͱθϩ˵ʪǮࣗçϩࢋ
• To set the group channel address for indoor units, see “Setting the indoor unit address" in
Installation Manual of the indoor unit.
ࣄƊkߪࡏߢ࣍˙ͱθŵđAɇʒʒθʪϑϑͱʒʪ࣎ࡡƊkߢߢࡏŵđAߢɇʒʒθʪϑϑϑʪϩϩ˝ࣅ
• To set the tenant address upon request, contact the Samsung service center.
• To control all indoor units with different tenant addresses, make sure that all the Wi-Fi Kits are
registered to the smartphone.
• When using the multi-tenants feature forWi-Fi Kits, the upper-level controllers (touch centralized
controller, DMS) other than the OnOff controller can be installed at the same time.
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX[ YWX`TW]TX_GGG㝘䟸G\aX\aYZ
15
ENGLISH
Checking the Wi-Fi Kit
Power LED
AP button
Wi-Fi connection LED
Reset button
Wi-Fi setting LED
<Front panel of the Wi-Fi Kit>
Items on the LED display
Item LED indication ťͱиʪθϑЇΧΧц Wi-Fi connection Wi-Fi setting
ߢInitialized On On On
ߣGeneral On On Off
ߤAP connected,
Internet connection incomplete On Blinking Off
ߥTracking completed,
AP connection incomplete On Off Off
ߦWi-Fi modem malfunctioning Blinking Blinking Blinking
ߧSearching AP (AP mode) On Off On
ߨTracking units Blinking Blinking Off
8ĘͱЇϩϩθɇʀʪʒ Blinking Off Off
9Inspection of the network PBA
required On Blinking Blinking
ߢߡ User authentication required
(AP mode) On Off Blinking
ߢߢ Downloading Off On Off
ߢߣ Rescue mode Blinking On Blinking
* If the "Rescue mode" indication appears on the LED:
- Reset the Wi-Fi Kit using the "Reset" button, and check if "Rescue mode" turns off.
- If "Rescue mode" persists even though you tried resetting the Wi-Fi kit several times, contact a service
center.
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX\ YWX`TW]TX_GGG㝘䟸G\aX\aYZ
16
Installing the Wi-Fi Kit
Initializing the user data
• To initialize the user data on a Wi-Fi Kit, press the (SW3) button inside the Wi-Fi Kit for 5 seconds. All the
indicators illuminate and the user data is deleted.
Updating with a Micro SD card
庤
庣
Type Capacity File system
Micro SD Max 4GB FAT16
Micro SDHC Max 32GB FAT32
1. Create a folder named “update" in the Micro SD card. Copy the latest software image and paste it into the
folder created in the Micro SD card.
• Be sure to format the Micro SD card using FAT16 or FAT32 before creating the "update" folder.
2. Insert the Micro SD card into the slot of the Wi-Fi Kit.
3. Press the [Reset] button on the side of the Wi-Fi Kit.
4. The indicator (ⓓ) on the Wi-Fi Kit blinks every 2 seconds during update.
• Once the update has been successful, the indicator promptly turns on and then turns off longer.
(On: 0.2 second, Off: 2 seconds)
• The indicator blinks every 0.2 second when the update was not completed.
5. When the update has completed normally, remove the Micro SD card and then press the [Reset] button.
6. Restarting the Wi-Fi Kit after an update failure will restore the software to the previous version.
When the update failure persists, follow the instructions below:
• ʪʀ˵ʪʀ˝ࡠA˵ɇ˝ʪϩ˵ʪЇΧʒɇϩʪɇ˝ʪ࣍ѣʪ࣎ࢋ
• Micro SD card checking: Replace the Micro SD card.
• PBA checking: Replace the network PBA.
CAUTION
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX] YWX`TW]TX_GGG㝘䟸G\aX\aYZ
17
ENGLISH
SmartThings app
To use the SmartThings app, connect the product to the network in the sequence described below.
The images shown may differ depending on your smartphone model, OS version and manufacturer.
You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the
product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks.
Checking the power connections
Check if the power is connected to the product and the access point.
Setting up and connecting to a Wi-Fi access point using your smartphone
1. To connect the product to a Wi-Fi network, turn on Wi-Fi at “Settings > Wi-Fi", and then select the access
point to connect to
• Only alphanumeric characters are supported for wireless access point names (SSIDs).
If an SSID has a special character, rename it before connecting to it.
SAMSUNG_2G
SAMSUNG_5G
On
Select
2. ƟЇθ˝ͱ˙˙ࣨƊđŵƟĘkƟǮĮŵçƊǮÃƟA²ɇϩࣨƊʪϩϩ˝ϑǮࣗͱцͱЇθƊɇθϩΧ˵ͱʪ
• Ã˙ࣨƊđŵƟĘkƟǮĮŵçƊǮÃƟA²ͱθࣨʒɇΧϩЭʪǮࣗϑϩЇθʪʒͱࡡцͱЇʀɇͱϩʀͱʪʀϩϩͱϩ˵ʪʪϩиͱθࢋ9ʪϑЇθʪ
to turn off these functions before connecting to the network.
Off Off
• The setup may differ depending on your smartphone model, OS version and manufacturer.
3. Checking the Internet connectivity
• After connecting to Wi-Fi, check that your smartphone is connected to the Internet.
• ѣθʪиɇɇцΧθʪЭʪϩцͱЇθϑɇθϩΧ˵ͱʪ˙θͱʀͱʪʀϩ˝ϩͱϩ˵ʪÃϩʪθʪϩࢋÃϩ˵ϑʀɇϑʪࡡʀͱϩɇʀϩцͱЇθ
Internet service provider for troubleshooting.
NOTE
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX^ YWX`TW]TX_GGG㝘䟸G\aX\aY[
18
SmartThings app
Downloading the SmartThings app and registering your Samsung account
1. Downloading the SmartThings app
SmartThings (Samsung Connect)
Samsung Electronics Co., Ltd.
• Search for "SmartThings" on Play Store orApp Store, and download the
SmartThings app to your smartphone.
• If the SmartThings app is already installed on your smartphone, update it
to the latest version.
• For the tablets that are not supported by the SmartThings app and the smart phones that has an
OS version earlier than the recommended versions, the SmartThings app may not be found.
- Android OS 6.0 or later (with at least 2 GB RAM) is recommended.
- Supported screen resolutions: 1280 x 720 (HD), 1920 x 1080 (FHD), 2560 x 1440 (WQHD)
• The SmartThings app is not compatible with some Apple devices including iPad and some
smartphones.
- iPhone 6 or later with iOS 10.0 or later is supported.
- Supported screen resolutions: 1334x750, 1920x1080
• The SmartThings app may change without prior notice to improve product usability and
performance.
2. Registering your Samsung account
• A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to
your account, follow the instructions displayed on the SmartThings app.
You do not need to install an additional app.
• If you already have a Samsung account, log in to the account. When your smartphone is a Samsung
device and you have a Samsung account, your smartphone is automatically logged in to your
account.
• If you log in from a smartphone produced for a different country, you need to log in with its country
code when you create your Samsung account, and the SmartThings app may not be used on some
smartphones.
Connecting the SmartThings app to your product
1. Selecting the product to connect to
ߣ࣒ ˙ϩʪθϩ˵ʪǮࣛϩϩθɇʀ˝ϑʀͱΧʪϩʪࡥθЇϩ˵ʪƊɇθϩƟ˵˝ϑɇΧΧ
ߤ࣒ ˙ϩʪθϩ˵ʪƊɇθϩƟ˵˝ϑɇΧΧϑϑϩɇθϩʪʒࡥϑʪʪʀϩ࣬UUĘĮǮи˵ʪɇΧͱΧࣛЇΧиʒͱиϑɇц˝ϩ˵ɇϩɇΧθͱʒЇʀϩ
ϩͱʀͱʪʀϩϩͱϑ˙ͱЇʒɇΧΧʪɇθϑ
ʪиʒʪЭʀʪ˵ɇϑɵʪʪ˙ͱЇʒ
ʒʒϩ˵ϑʒʪЭʀʪϩͱ
ƊɇθϩƟ˵˝ϑ
ĘʪЭʪθ øɇϩʪθ ʒʒͱи
∑㇎
Select
NOTE
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX_ YWX`TW]TX_GGG㝘䟸G\aX\aY[
19
ENGLISH
ߥ࣒ Ã˙ϩ˵ʪΧͱΧࣛЇΧиʒͱиʒͱʪϑͱϩɇΧΧʪɇθࡥϑʪʪʀϩ࣬ࡥɇʒϩ˵ʪ࣬ʒʒUʪЭʀʪϑ
My home
øЭ˝θͱͱ
My home
øЭ˝θͱͱ
ʒʒʒʪЭʀʪϑ
đц²ͱʪ
øЭ˝θͱͱ
Select
Select
You can add a product you want to connect to by selecting it manually or by selecting “Auto detect".
• Select manually: Samsung > Air conditioner > System air conditioner
• Auto detect: [System a/c] Samsung
θʀͱʒϩͱʪθ
ƊɇϑЇ˝
Їϩͱʒʪϩʪʀϩ
Select Select
2. Connecting the SmartThings app to your product
• Follow the instructions displayed on the SmartThings app to connect to your product.
• For information on how to use the SmartThings app, select the How To menu on the app.
• If any pop-window appears on the top of the smartphone while connecting to your product, do not
select it.
• If a pop-up window saying that the device is already registered appears during connecting to your
ΧθͱʒЇʀϩࡡ˝ʪϩΧʪθϑϑͱЇϑ˝ࣨŵkůƸkƊƟťkŵđÃƊƊÃĮĘ˙θͱɇЇϑʪθɇθʪɇʒцʀͱʪʀϩʪʒϩͱϩ˵ʪ
ΧθͱʒЇʀϩࡡͱθʀθʪɇϩʪɇʪиɇʀʀͱЇϩЇϑ˝ࣨŵkÃƊƟkŵđǽAAĮƸĘƟϩͱʒʪΧʪʒʪϩцʀͱʪʀϩϩͱϩ˵ʪ
product.
• If a Samsung account-related country error occurs during connecting to your product, log out of
your current Samsung account, log in to your previous Samsung account, and then delete all
devices that have been connected previously. Then, log in to your current Samsung account again,
ɇʒϩ˵ʪʀͱѣ˝Їθʪϩ˵ʪϑʪϩϩ˝ϑࢋ
• If a failure message appears while adding a device, see "Setting up and connecting to a Wi-Fi access
point using your smartphone" on page 17. The connection may fail temporarily due to an
installation location problem of the access point or other problems.
• If the number of added indoor units is incorrect after adding devices, run the tracking again and
then try adding the devices again.
• For security protocols forwireless/wired access points, WPA-PSK and WPA2-PSK are recommended.
ͱθɇЇϩ˵ʪϩʀɇϩͱʪϩ˵ͱʒϑࡡkƊϑθʪʀͱʪʒʪʒࢋĘʪиǮࣗɇЇϩ˵ʪϩʀɇϩͱϑΧʪʀѣʀɇϩͱϑɇʒ
Wi-Fi non-standard authentication methods are not supported.
• If your Internet service provider permanently have registered the MAC address (a unique
ʒʪϩѣʀɇϩͱЇɵʪθ࣎ͱ˙цͱЇθťAͱθͱʒʪࡡцͱЇɇцͱϩɵʪɇɵʪϩͱʀͱʪʀϩцͱЇθΧθͱʒЇʀϩϩͱϩ˵ʪ
Internet. Contact your Internet service provider and ask how to connect devices other than your PC
࣍ϑЇʀ˵ɇϑɇɇθʀͱʒϩͱʪθɇʒɇɇθΧЇθѣʪθ࣎ϩͱϩ˵ʪÃϩʪθʪϩࢋ
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGX` YWX`TW]TX_GGG㝘䟸G\aX\aY[
20
Starting the system air conditioner app
Controlling the air conditioner
Below are functions that you can control or monitor using the Wi-Fi adapter.
Category Function Description
Monitoring
Desired Temp Displays the desired temperature.
Current Temp Displays the current temperature.
Filter warning ɇʪθϩϑ˝ʪʪθɇϩʪʒɇ˙ϩʪθϩ˵ʪѣϩʪθϩʪʪɇΧϑʪϑࢋ
Defrost Appears in the defrost state.
Control
Power supply Turn on or off the air conditioner.
Operation mode Select the desired operation mode.
Temperature control Adjust the desired temperature.
Fan speed Adjust the desired fan speed.
θѤͱиʒθʪʀϩͱ ʒЇϑϩϩ˵ʪʒʪϑθʪʒɇθѤͱиʒθʪʀϩͱࢋ
Wind-Free Enables/disables the Wind-Free function.
Long Enables/disables the Long function.
Clean Enables/disables the Clean function.
Motion detection Enables/disables the motion detection function.
Direct/indirect wind Select any of direct wind and indirect wind while in motion
detection.
Ionizer Enables/disables the Ionizer function.
Energy monitor Displays the power usage on the daily/weekly/monthly basis.
Reset Filter ƸΧͱɇѣϩʪθɇʪθϩࡡцͱЇʀɇϩɇіʪϩ˵ʪѣϩʪθθʪϑʪϩϩʪࢋ
Ǥʪϩɇϩͱ kɇɵʪϑࢥʒϑɇɵʪϑϩ˵ʪǤʪϩɇϩͱࢋ
Hot water Enables/disables the Hot water function.
Dual Set Point
Enables/disables the DSP function.
- DSP : It allows users to set heating and cooling desire
temperature simultaneously.
• Available features may differ depending on the model.
• Ɗͱʪ˙ʪɇϩЇθʪϑɇцͱϩɵʪɇЭɇɇɵʪɇʀʀͱθʒ˝ϩͱϩ˵ʪϑΧʪʀѣʀɇϩͱϑͱ˙ϩ˵ʪʒͱͱθЇϩࢋ
• For more information about the SmartThings app, details can be found in SmartThings app.
NOTE
zvsGvjmG~TmGrp{G㨰䛙Gpiptluki]_TW_[Y\hTWWUGGGYW YWX`TW]TX_GGG㝘䟸G\aX\aY[
Table of contents
Other Samsung Air Conditioner Accessories manuals
Popular Air Conditioner Accessories manuals by other brands
GE
GE RAB46B installation instructions
GE
GE RAD10 installation instructions
Unitary products group
Unitary products group 1LN0802 installation instructions
Mitsubishi Electric
Mitsubishi Electric PAC-DRP10DP-E2 installation manual
Galletti
Galletti Estro quick start guide
LG
LG Dry Contact installation manual
LG
LG EEV Kit installation manual
Daikin
Daikin EKMBDXB7V1 Design guide
Tecnosystemi
Tecnosystemi smart clima GABBIA GA - 700 instruction manual
Trane
Trane TR-OHS RCU Series Installation, operation and maintenance
Mitsubishi Electric
Mitsubishi Electric EHGT17D-YM9ED Service manual
Mitsubishi
Mitsubishi PAC-YG60 MCA-J Installation instructions manual
