Samsung AM015HNNDEH/EU Installation instructions

2
Disassembly and Reassembly
Repairs must be carreid out by trained professional.
For any repairs, please contact our service provider or independent qualified professional.
No Parts Procedure Remark
1 Panel 1) Pull both hooks and take the grille downward.
Two safety clips are mounted to the front grille
to prevent it from dropping.
2) Detach the safity clip and take up the grille.
3) Remove the 2 fixed screws to remove the
Control-Box Cover. (Use +Screw Driver)
4) Remove the Remocon-Receiver and Blade
ConnectorWire from the PBA. (3EA)

3
No Parts Procedure Remark
1 Panel 5) Push the 4 panel corners and cover downwards
to remove it.
6) Disassemble the bolts that are assembled with
the indoor unit at the 4 panel corners.
7) Press the Hangers at both sides of the panel
inwards, to remove it from the indoor unit’s
hook.
Remove the panel from the indoor unit
.
2 Control-Box 1) Disconnect the Connector Wire that is
connected to the indoor unit’s PBA

4
Disassembly and Reassembly
No Parts Procedure Remark
2 Control-Box 2) Unscrew the 2 fixed screws on both sides of
the Control Box, and disassemble the Control
Box from the indoor unit.
(Use +Screw Driver)
3 Bell-Mouth 1) Unscrew the screw fixed on the Bell-Mouth.
(Use +Screw Driver)
2) Push the Bell-Mouth in the direction opposite
to where it’s installed on the Control-Box to
remove it.
4 Drain Pan 1) Unscrew the screws on the 4 corners of the
indoor unit. (Use +Screw Driver)

5
No Parts Procedure Remark
4 Drain Pan 2) Remove the Drain Pan from the indoor unit