Samsung jitterbug5 User manual

Quick-Start Guide

Quick-Start Guide 1
Quick-Start Guide
Welcome to GreatCall!
Thank you for purchasing the Jitterbug®cell phone. This Quick-Start Guide will
help you activate and set up your Jitterbug so you can enjoy the best cell phone
experience around. Once you’re set up and calling, you can learn more about
the benets of being a GreatCall customer in your User Guide, contained in this
package.
Please do not turn your phone on until you are instructed to do so in the activation
process.
IMPORTANT!

2 Quick-Start Guide
Quick-Start Guide
The Front Of Your Jitterbug
Indicator Light Headset Jack (side)
Camera
Power Connector (side)
Outside Display

Quick-Start Guide 3
Quick-Start Guide
The Back Of Your Jitterbug
Battery Cover
External Speaker
Lanyard Connector

4 Quick-Start Guide
Quick-Start Guide
888-
555-
5555
CALL?
The Inside Of Your Jitterbug Earpiece Speaker
Inside Display
On/Off Button
Microphone
“YES” Button
Volume Button
“NO” Button
Up/Down Button
5Star Button

Quick-Start Guide 5
Quick-Start Guide
Activating Your Jitterbug
Please do not turn on your phone until instructed to do so. If you turn it on
prior to setting up your account, the device may fail to activate. If the device
fails to activate, power off and start with step .
IMPORTANT!
For your convenience, the battery has been pre-installed in your Jitterbug phone.
Plug the large end of the Wall Charger into a standard wall outlet (110/220 VAC),
and plug the smaller end into the Power Connector on the side of your Jitterbug
phone. The Outside Display will indicate that the battery is charging.
To ensure that your Jitterbug phone is activated successfully, it is important that
you follow these simple steps when activating.
• If you purchased your Jitterbug phone directly from GreatCall by phone or on
greatcall.com, please skip to step . Otherwise, proceed to step .

6 Quick-Start Guide
Quick-Start Guide
1Gather The Required Information.
Home and billing address
Phone number
Email address
Credit or debit card information
Emergency contact details
MEID-DEC:
123456789012345678
The 18-digit Serial Number found on the side of your Jitterbug box, or on the
Activation Card you received inside the Jitterbug box.

Quick-Start Guide 7
Quick-Start Guide
2Go Online Or Call To Set Up Your Account.
If you do not have a GreatCall account, visit us online at
www.greatcall.com/activate. There you can enter your Jitterbug Serial
Number and follow the instructions to set up your account. If you do not
have Internet access, please call
1-866-482-1424.
- OR -
If you are an existing GreatCall customer and would like to replace,
upgrade, or add a Jitterbug phone to your account, or need to activate
more than one device, call us at 1-866-482-1424.

8 Quick-Start Guide
Quick-Start Guide
3Turn On Your Jitterbug To Activate.
You can now open your Jitterbug and press the
on
off
button and the activation process
will automatically begin.
This process may take a few minutes and you may notice the phone reboot several
times. Once complete you will see a screen “Phone was set up successfully!”
Congratulations! Your Jiiterbug is now activated.

Quick-Start Guide 9
Quick-Start Guide
Making Your First Call:
1. When you open your Jitterbug, you will hear a dial tone to indicate that service
is available. If service is not available, there will be no dial tone and you will
see “No Service” on the Inside Display.
2. Dial the full ten-digit number using your keypad. You may be required to dial
the number “1” rst before placing a call in some areas.
3. Press the button to place the call when you are nished dialing.
If you accidentally press a wrong button, press the button to back up and delete
the last number.
NOTE: