Samsung EO-BG935 User manual

www.samsung.com
User Manual
EO-BG935
1/2016. Rev.1.

Table of Contents
English (UK)
Français
Deutsch
Italiano
Español
Magyar
Polski
Română
Български
Hrvatski
Srpski
Português
Latviešu
Lietuvių kalba
Eesti
Nederlands
Svenska
Norsk
Suomi
Dansk
Ελληνικά
Slovenščina
Slovenčina
Čeština
Türkçe


Русский
Українська
Қазақ тілі
English (USA)
Español (Castellano)
简体中文
繁體中文(台灣)
Français (Canada)
Português (Brasil)
한국어

3
Read me first
Please read this manual before using the device to ensure safe and proper use.
•
Images may differ in appearance from the actual product. Content is subject to change
without prior notice.
•
Before using the headset, make sure it is compatible with your device.
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Note: notes, usage tips, or additional information
English (UK)
1

4
Getting started
Package contents
Check the product box for the following items:
•
Headset
•
Quick start guide
•
The items supplied with the device and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this device and may not be compatible
with other devices.
•
Appearances and specifications are subject to change without prior notice.
•
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the device before purchase.
•
Use only Samsung-approved accessories. Using unapproved accessories may cause
the performance problems and malfunctions that are not covered by the warranty.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
English (UK)
2

Getting started
5
Device layout
Charger port
Volume (+) button
Multifunction/Talk
button
Neckband
Noise-cancelling
switch
Notification light
Vibration area
Noise-cancelling
microphone
Microphone
Volume (-) button
Right earphone
Magnetic sensor
Microphone
Power switch
Left earphone
English (UK)
3

Getting started
6
Buttons and functions
Name Function
Power switch
•
Slide to turn the headset on or off.
•
Slide towards and hold for approximately three seconds to enter
Bluetooth pairing mode.
Multifunction/
Talk button
•
Press to answer or end calls.
•
Press to play or pause multimedia files.
•
Press and hold for one second to reject a call or to activate
ambient sound mode.
Volume buttons
•
Press to adjust the volume during a call or media playback.
•
Press and hold the Volume (-) button to skip to the next file during
media playback.
•
Press and hold the Volume (+) button to skip to the previous file
during media playback.
•
Press and hold the Volume buttons (+ and -) simultaneously for
about a second to turn the vibration feature on or off.
Noise-cancelling
switch
•
Slide to ON to activate the noise-cancelling feature.
Notification light
The notification light alerts you to the headset’s status.
Status Colour
Power on
•
Flashes blue three times
Bluetooth pairing
mode
•
Flashes red, green, and blue
Connected via
Bluetooth
•
Quickly flashes blue three times
Incoming call
•
Flashes blue
English (UK)
4

Getting started
7
Status Colour
Charging
•
Continuously on red
Fully charged
•
Continuously on green
During use or in
sleep mode
•
Off
Charging the battery
Charge the battery before using the headset for the first time or when the headset has been
unused for extended periods.
Use only Samsung-approved chargers. Unapproved chargers can cause the battery to
explode or damage the headset.
•
You can charge the headset using the charger (sold separately).
•
Using a power source other than the charger, such as a computer, may result in a
slower charging speed due to a lower electric current.
•
The headset can be used while it is charging, but it may take longer to fully charge
the battery.
•
While charging, the headset may heat up. This is normal and should not affect the
headset’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
•
If the headset is not charging properly, take the headset and the charger to a
Samsung Service Centre.
English (UK)
5

Getting started
8
1 Open the charger port cover. Connect the headset to the USB power adaptor via the USB
cable. Plug the USB power adaptor into an electric socket.
Connecting the charger improperly may cause serious damage to the headset. Any
damage caused by misuse is not covered by the warranty.
2 After fully charging, first unplug the USB cable from the headset, and then unplug it from
the computer or the electric socket.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
•
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Turning the headset on and off
•
: ON
•
: OFF
•
: Bluetooth pairing mode
Follow all posted warnings and directions from authorised personnel in areas where
the use of wireless devices is restricted, such as aeroplanes and hospitals.
English (UK)
6

9
Connecting via Bluetooth
Bluetooth
About Bluetooth
Bluetooth is a wireless technology standard that uses a 2.4 GHz frequency to connect to
various devices over short distances. It can connect and exchange data with other Bluetooth
enabled devices, such as mobile devices, computers, printers, and other digital home
appliances, without connecting via cables.
Notices for using Bluetooth
•
To avoid problems when connecting your headset to another device, place the devices
close to each other.
•
Ensure that your headset and the other Bluetooth device are within the Bluetooth
connection range (10 m). The distance may vary depending on the environment the
devices are used in.
•
Ensure that there are no obstacles between the headset and a connected device,
including human bodies, walls, corners, or fences.
•
Do not touch the Bluetooth antenna of a connected device.
•
Bluetooth uses the same frequency as some industrial, scientific, medical, and low power
products and interference may occur when making connections near these types of
products.
•
Some devices, especially those that are not tested or approved by the Bluetooth SIG, may
be incompatible with the headset.
•
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files
or illegally tapping communications for commercial purposes).
English (UK)
7

Connecting via Bluetooth
10
Connecting to other devices
This headset is compatible with Bluetooth-enabled devices.
1 Headset Slide the Power switch to the right and hold it for approximately three seconds
to enter Bluetooth pairing mode.
When you turn on the headset for the first time, it automatically enters Bluetooth pairing
mode.
2 Other device Activate the Bluetooth feature and search for Bluetooth devices.
For more information, refer to the other device’s user manual.
3 Other device Tap
Samsung Level U Pro ANC (0000) from the list.
•
The PIN for the headset is the four-digit number in parenthesis displayed on the
other device’s Bluetooth settings screen. The number differs depending on the
headset.
•
Once devices are paired, recently connected devices automatically connect to your
headset whenever you turn it on.
•
If the Bluetooth connection fails or other device cannot locate the headset, remove
the device’s information from the other device’s list. Then, try to connect again.
•
If the headset does not work properly, restart it or try to pair the devices again.
•
The Bluetooth connection range and sound quality may vary depending on the
connected devices.
English (UK)
8