Samsung GH68-19211A User manual

World Wide Web
http://www.samsungmobileusa.com
http://www.samsung.com/ca
Printed in Korea
Code No.:GH68-19211A
NA. 10/2008. Rev. 10

English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

1
E
ng
li
s
h
Contents
Safety and usage information....................................................2
Your headset overview .............................................................3
Charging the headset...............................................................4
Turning the headset on or off ....................................................5
Understanding various modes ...................................................5
Pairing with your Bluetooth phone .............................................6
Using call functions..................................................................7
Safety approvals .....................................................................8
UL certified travel adapter ........................................................9
Cautions .............................................................................. 10
Warranty and parts replacement.............................................. 10
Specifications ....................................................................... 12

2
Bluetooth
®
is a registered trademark of the Bluetooth SIG, Inc.
worldwide. Bluetooth QD ID: B014567
• Never disassemble or modify your headset for any reason.
Doing this may cause the headset to malfunction or become
combustible. Bring the headset to an authorized service
center to repair it or replace the battery.
• When using your headset while driving, follow local
regulations in the country or region you are in.
• Avoid storage at high temperatures (above 50° C/122° F),
such as in a hot vehicle or in direct sunlight, as this can
damage performance and reduce battery life.
• Do not expose the headset or any of its supplied parts to
rain or other liquids.
Safety and usage information
At very high volumes, prolonged listening to the
headset can damage your hearing.

3
E
ng
li
s
h
Your headset overview
Volume down
button
Earpiece
Microphone
Talk button
Volume up
button
Indicator light
Earhook
Adapter jack

4
Put the charger into the jack on the
headset and into the electrical outlet.
Charge the headset until the red
indicator light turns blue.
Charging the headset
Do not attempt to charge the headset with anything
other than the charger provided.

5
E
ng
li
s
h
To turn the headset on, press and hold the talk button until the
blue indicator light flashes 4 times.
To turn the headset off, press and hold the talk button until
both blue and red indicator lights flash.
•
Standby mode : The headset is waiting for a call. The blue
indicator light flashes every 6 seconds.
•
Active mode : The headset has a call in progress. The blue
indicator light flashes every 8 seconds.
•
Pairing mode : The blue indicator light stays lit. You can
discover and connect to your headset on your phone.
•
Low battery mode : There is less than 10% of battery
power left. The red indicator light flashes. You must
recharge the battery.
Turning the headset on or off
Understanding various modes

6
1 Enter Pairing mode.
• Turn off your headset and press and hold the talk button
until the blue indicator light remains lit after blinking.
• If you turn it on for the first time, it proceeds into Pairing
mode immediately.
2 Search for and pair with your phone according to your
phone’s user guide. (Bluetooth PIN: 0000, 4 zeros)
• If the pairing is successful, the blue indicator light will
flash 10 times rapidly before entering Standby mode.
• If the blue indicator light remains lit, retry pairing.
Pairing with your Bluetooth phone
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the talk button to
reconnect.

7
E
ng
li
s
h
Some functions may not be supported by your phone.
In Standby mode
Press the talk button to:
• Answer an incoming call
• Make a voice-activated call
Press and hold the talk button to:
• Redial the last number called
• Reject an incoming call
In Active mode
Press the talk button to:
• End a call
• Transfer a call from the phone to the headset
Press and hold the talk button to:
• Place a call on hold
• Answer a second call
• Retrieve a call on hold
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off or on.
Using call functions