Samsung WEP870 - Bluetooth Headset User manual

World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
EU A. 02/2009. Rev. 1.0

Temporary

English ............................................................. 1

English
1
Contents
Getting started
Your headset overview ....................................................3
Button functions.............................................................4
Icons ............................................................................5
Charging the headset......................................................6
Wearing the headset .......................................................8
Using your headset
Turning the headset on or off ...........................................9
Pairing and connecting the headset ................................. 10
Using call functions....................................................... 12
Appendix
Frequently asked questions............................................ 14
Warranty and parts replacement..................................... 16
Correct disposal of this product ...................................... 17
Correct disposal of batteries in this product...................... 18
Specications............................................................... 19

2
Take the time to read through this user guide before you start to use
WEP870 Bluetooth Headset.
Bluetooth®is a registered trademark of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID: Bxxxxxx
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this
may cause the headset to malfunction or become combustible. Bring
the headset to an authorised service centre to repair it or replace the
battery.
When using your headset while driving, follow local regulations in the
country or region you are in.
Avoid storage at high temperatures (above 50° C/122° F), such as in
a hot vehicle or in direct sunlight, as this can damage performance
and reduce battery life.
Do not expose the headset or any of its supplied parts to rain or other
liquids.
At very high volumes, prolonged listening to the headset can damage
your hearing.
•
•
•
•

English
3
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
Make sure you have the following items with your headset :
charger and user manual.
The items supplied with your headset may vary depending on your region.
Display
Volume button
Earpiece
Power button
Charger jack
Talk button
Ear hook
Primary
microphone
Secondary
microphone

4
Button functions
Button Function
Power Slide up or down to turn the headset on or off.
Talk
Press and hold to make a call.
Press to answer or end a call.
Press and hold to enter Pairing mode.
•
•
•
Volume Press to adjust the volume.
Press and hold to turn the microphone on or off.
•
•
You can hear a beep when the volume level of the headset reaches to
the lowest or highest level.
Do not use the headset in humid places or handle it with wet hands.
•
•

English
5
Icons
Icon Description
Battery power level
Bluetooth connection
On: Standby or Active mode
Blinking: Pairing with a Bluetooth enabled device
•
•
Call connection
On: Call in progress
Blinking: Making or receiving a call
•
•

6
Charging the headset
This headset has a rechargeable internal battery which is non-
removable. Ensure that you fully charge the battery before using the
headset for the rst time.
Using the charger
1Plug the charger into the charger jack on the headset.
2Plug the charger into a power outlet.
During charging, the Battery icon will be moving.
If charging does not begin, unplug the charger and plug it in again.

English
7
3When the headset is fully charged, the Battery icon is no longer
moving. Unplug the charger from the power outlet and the headset.
Use only a Samsung-approved charger. Unauthorised chargers may
cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because
it is a consumable part.
You cannot use the headset while charging the battery.
•
•
•
When the battery power is low
The headset beeps and the Battery icon is empty and blinking. Recharge
the battery. If the headsets powers off during a call, the call will be
automatically transferred to the phone.