Samsung HM1500 User manual

www.samsung.com
Printed in Korea
GH68-27479A Rev.1.1
EU A. 10/2013

English...................................................................................1
Français...............................................................................27
Italiano.................................................................................53
Ελληνικά..............................................................................79
Nederlands..................................................................................105

English
1
Contents
Getting started
Your headset overview ....................................................4
Button functions.............................................................5
Charging the headset......................................................6
Wearing the headset .......................................................8
Using your headset
Turning the headset on or off ......................................... 10
Activate Vibration mode ................................................ 10
Pairing and connecting the headset................................. 11
Pairing via the Active pairing feature ............................... 14
Using call functions....................................................... 16

2
Appendix
Frequently asked questions............................................ 20
Warranty and parts replacement..................................... 22
Correct disposal of this product ...................................... 23
Correct disposal of batteries in this product...................... 24
Specications............................................................... 25

English
3
Safety information
To prevent injury to yourself and others or damage to your device, read
the safety information about your device before using the device.
Comply with all safety warnings and regulations regarding mobile device•usage while operating a vehicle.
Do not disassemble, modify, or repair your device. Any changes or•
modications to your device can void your manufacturer’s warranty. If your
device needs servicing, take your device to a Samsung Service Centre.
Do not bite or suck the device. Children or animals can choke on small•parts.
Do not store your device in very hot or very cold areas. It is recommended • to use your device at temperatures from 5 °C to 35 °C. Extreme
temperatures can damage the device and reduce the charging capacity and
life of your device and battery.
Do not use your device while it is charging or touch your device with wet•hands.
Keep your device dry. Humidity and liquids may damage the parts or•electronic circuits in your device. Water damage to your device can void
your manufacturer’s warranty.
Do not use your device outdoor during a thunderstorm. Doing so may result•in electric shock or device malfunction.
Excessive exposure to loud sounds can cause hearing damage. Exposure
to loud sounds while walking may distract your attention and cause an
accident.

4
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
Make sure you have the following items with your headset:•Travel adapter, Ear rubbers, User manual
The items supplied with your headset may vary depending on your•region.
Indicator light
Volume down
button
Charger jack
Microphone
Volume up button Talk button
Power switch
Earpiece

English
5
Button functions
Power switch
Slide up or down to turn the headset on or off.
Talk button
Press and hold to enter Pairing mode.•
Press to make or answer a call.•
Press to end a call.•
Volume up or down button
Press to adjust the volume.•
Press and hold at the same time to check the battery life time.•
Press and hold to turn the microphone on or off.•
You can hear a beep when the volume level of the headset reaches to the
lowest or highest level.

6
Charging the headset
This headset has a rechargeable internal battery which is non-
removable. Ensure that you fully charge the battery before using the
headset for the rst time.
1Plug the small end of the travel adapter into the charger jack.
2Plug the large end of the travel adapter into a power outlet.
During charging, the indicator light will turn red. If charging does not
begin, unplug the travel adapter and plug it in again.

English
7
3When the headset is fully charged, the indicator light changes to
blue. Unplug the travel adapter from the power outlet and the
headset.
Use only a Samsung-approved travel adapter. Unauthorised travel•adapters may cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging•because it is a consumable part.
When a call comes in while charging, disconnect your headset from the•travel adapter and answer the call.
To save energy, unplug the charger when not in use. The charger does•not have a power switch, so you must unplug the charger from the
electric socket when not in use to avoid wasting power. The charger
should remain close to the electric socket and easily accessible while
charging.
The socket-outlet shall be installed near the equipment and shall be•easily accessible.
When the battery charge gets low
The headset beeps and the indicator light ashes red. Recharge
the battery. If the headset powers off during a call, the call will be
automatically transferred to the phone.

8
Checking the battery level
At the same time, press and hold the Volume up and down buttons.
Depending on the battery level, the indicator light ashes 5 times in one
of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red
Wearing the headset
Insert the earpiece in your ear and clip the headset
to your clothes.

English
9
When you are not using the headset, you can clip
the earpiece to your clothes.
Using your headset
This section explains how to turn the headset on, pair and connect to
the phone, and use various functions
Activated functions and features may differ depending on the phone•type.
Some devices, especially those that are not tested or approved by•
Bluetooth SIG, may be incompatible with your headset.

10
Turning the headset on or off
To turn the headset on, slide up the power switch. The blue indicator•
light ashes 4 times.
To turn the headset off, slide down the power switch. The indicator•light turns off after the blue indicator light changes to red.
Activate Vibration mode
You can activate Vibration mode to receive a vibration alert when a call
comes in.
Press and hold the Talk button and the Volume up button at the same
time.
To deactivate Vibration mode, press and hold the Talk button and the
Volume down button at the same time.

English
11
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two
Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth
headset.
To use the headset with other Bluetooth devices, the devices must be
paired. When trying to pair the two devices, keep the headset and the
phone reasonably close together. After pairing, you can connect the two
devices.
Pairing and connecting the headset with a phone
1Enter pairing mode.
Turn on your headset and press and hold the Talk button until the•blue indicator light stays lit.
If you turn the headset on for the rst time, it proceeds into • Pairing mode immediately.
2Activate the Bluetooth feature on your phone and search for the
headset (see your phone’s user manual).
3 Select the headset (HM1500) from the list of devices found by your
phone.

12
4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.
Your headset supports the Simple Pairing feature which allows the
headset to be paired with a phone without requesting a PIN. This feature
is available for phones that are compliant with Bluetooth version 2.1 or
higher.
The headset also can be paired via the Active pairing feature,
see page 14.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected
with two Bluetooth phones at the same time.
1 After connecting with the rst Bluetooth phone, press and hold the
Talk button until the blue indicator light stays lit.
2Press and hold the Volume up button to activate the Multi-point
feature.
3Activate the Bluetooth feature on the second Bluetooth phone and
search for the headset (see your phone’s user manual).

English
13
4 Select the headset (HM1500) from the list of devices found by the
second Bluetooth phone.
5 Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to
the phone.
6 Reconnect to the headset from the rst Bluetooth phone.
You can set the headset automatically to reconnect to the recently•connected phones each time you turn it on.
To reconnect to the two most recently connected phones, activate the- Multi-point feature. Press and hold the Volume up button in Pairing
mode until the blue indicator light ashes twice.
To reconnect to only the most recently connected phone, deactivate- the Multi-point feature. Press and hold the Volume down button in
Pairing mode until the red indicator light ashes twice.
When the headset connects to two Bluetooth phones, some phones•may not connect to the headset as the second Bluetooth phone.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.•
Use the Bluetooth menu on your phone.•

14
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.•
Use the Bluetooth menu on your phone.•
Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search
for a Bluetooth phone and try to make a connection with it.
1Turn on the headset.
2Press and hold the Talk button to enter Pairing mode.

English
15
3Press and hold the Talk button until the violet indicator light turns on.
The headset will switch to Active Pairing mode, search a Bluetooth
phone within range, and attempt to pair with it.
Ensure the phone you wish to connect to is within range of the headset.•Place the headset and phone close to each other to avoid pairing with
other devices.
The headset will attempt Active pairing for up to 20 seconds.•
The Bluetooth phone you want to connect with must not be paired with•
other devices. If the phone is already connected to another device, end
the connection and restart Active pairing feature.
This feature is available for mobile phones, but the phone’s Bluetooth • visibility option must be set to on.
This feature may be unavailable depending on the some PDAs.•

16
Using call functions
Making a call
Redialling the last number
Press the Talk button to redial the last number of the most recently
connected phone.
Press the Talk button twice to redial the last number of the other phone.
Dialling a number by voice
Press and hold the Talk button to dial a number of the rst phone by
voice, and say a name.
Available call functions may vary by the phone.

English
17
Answering a call
Press the Talk button to answer a call when you hear incoming call
tones.
When two calls from the two connected phones come in, you can answer
the call of the rst phone.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
When two calls from the two connected phones come in, you can reject
the call of the rst phone.
Using options during a call
You can use the following functions to control your call during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.