Samsung HM1100 User manual

Headquarters:
1301 East Lookout Drive Richardson,
TX 75082
Internet Address:
www.samsungmobileusa.com/
accessories
Customer Care Center:
1-800-SAMSUNG
Code No.: GH68-29809J
NA. 11/2010. Rev.1.1
Your headset overview
Make sure you have the following items with your headset: travel adapter,•
ear pieces, earhook and user manual.
The items supplied with your headset may vary depending on your region.•
Use only Samsung-approved chargers. Unauthorized chargers may cause•
an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because it•
is a consumable part.
When a call comes in while charging, disconnect your headset from the•
travel adapter and answer the call.
Checking the battery level
At the same time, press and hold the Volume down and the Talk button.
Dependingonthebatterylevel,theindicatorlightashes5timesinoneofthe
following colors:
Battery level Indicator light color
Above 80 % Blue
80 ~20 % Violet
Below 20 % Red
Charging the headset
1Connect the charger to the headset (see below images).
2Plug the charger in to the wall outlet. During charging, the indicator light will
turn red. If charging does not begin, unplug the travel adapter and plug it in
again.
3When the headset is fully charged, the indicator light changes to blue. Unplug
the travel adapter from the power outlet and the headset.
Power switch
Volume button
Indicator light
Talk button Earhook
Charger jack
Microphone
HM1100
Earpiece
HM1100_QSG_NA_Rev.1.1.indd 1 2010-11-01 오전 9:50:49

When the battery charge gets low
Theheadsetbeepsandtheindicatorlightashesred.Rechargethebattery.Ifthe
headset powers off during a call, the call will be automatically transferred to the
phone.
Wearing the headset
Place the headset on your ear.
Depending on what ear you are going to wear the headset, simply adjust the ear
hook accordingly.
Turning the headset on or off
To turn the headset on, slide up the power switch. The blue indicator light
●
ashes4times.
Toturntheheadsetoff,slidedownthepowerswitch.Theindicatorlightashes
●
red then turns off.
Pairing and connecting the headset
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
With the headset turned on, press and hold the Talk button until the blue
●
indicator light stays lit.
Ifyouturnontheheadsetforthersttime,itproceedsintoPairingmode
●
immediately.
2Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3Select the headset (HM1100) from the list of devices found by your phone.
4 EntertheBluetoothPIN(0000,4zeros)topairandconnecttheheadsetto
your phone.
Making a call
Redialing the latest number
Press and hold the Talk button to redial the latest number of the most recently
connected phone.
For some phones, pressing the Talk button opens the call log list. Press the Talk
button again to dial the selected number.
Dialing a number by voice
Press the Talk button and say a name.
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in. This function
isavailableonlyontheHands-Freeprole.Formoreinformation,
see your phone’s user manual.
Your headset supports the Simple Pairing feature which allows the headset to
be paired with a phone without requesting a PIN. This feature is available for
phones that are compliant with Bluetooth version 2.1 or higher.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.
●
Use the Bluetooth menu on your phone.
●
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically reconnect
each time you turn it on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.
●
Use the Bluetooth menu on your phone.
●
Using call functions
Available call functions may vary by the phone.
▲Left ▲Right
HM1100_QSG_NA_Rev.1.1.indd 2 2010-11-01 오전 9:50:49