Samsung WEP301 - Headset - Over-the-ear User manual

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Português. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

1
E
ng
li
s
h
Contents
Safety and usage information....................................................2
Your headset overview .............................................................3
Charging the headset ...............................................................4
Turning the headset on or off ....................................................4
Understanding various modes....................................................5
Pairing with your Bluetooth phone..............................................5
Using call features ...................................................................6
Safety approvals......................................................................7
UL certified travel adapter.........................................................8
Cautions.................................................................................9
Warranty and parts replacement..............................................10
Correct disposal of this product ...............................................11
Specifications........................................................................12

2
Bluetooth
®
is a registered trademark of the Bluetooth SIG, Inc.
worldwide. Bluetooth QD ID: B012977
• Never disassemble or modify your headset for any reason.
Doing this may cause the headset to malfunction or become
combustible. Bring the headset to an authorized service
center to repair it or replace the battery.
• When using your headset while driving, follow local
regulations in the country or region you are in.
• Avoid storage at high temperatures (above 50° C/122° F),
such as in a hot vehicle or in direct sunlight, as this can
damage performance and reduce battery life.
• Do not expose the headset or any of its supplied parts to
rain or other liquids.
Safety and usage information
At very high volumes, prolonged listening to the
headset can damage your hearing.

3
E
ng
li
s
h
Your headset overview
• If your headset responds slowly, stops responding, or
freezes, press the reset button on the back of the
headset with a pointed tool.
• Depending on which ear you will wear the headset,
simply adjust the ear hook accordingly.
Left Right
Volume down
button
Earpiece
Microphone
Multi-function
button
Volume up
button
Indicator
light Reset button
Ear hook

4
Put the adapter into the jack on the headset
and into the electrical outlet.
Charge the headset until the red indicator
light turns blue.
To turn the headset on, press and hold the Multi-function
button until the blue indicator light flashes 4 times.
To turn the headset off, press and hold the Multi-function
button until both blue and red indicator lights flash.
Charging the headset
Do not attempt to charge the headset with anything
other than the adapter provided.
You can use your headset while charging.
Turning the headset on or off

5
E
ng
li
s
h
• Standby mode : The headset is waiting for a call. The blue
indicator light flashes every 3 seconds.
•
Active mode : The headset has a call in progress. The blue
indicator light flashes every 8 seconds.
•
Pairing mode : The blue indicator light stays lit. You can
discover and connect to your headset on your phone.
•
Low battery mode : There is less than 10% of battery
power left. The red indicator light flashes. You must
recharge the battery.
1 Enter Pairing mode.
• Turn off your headset and press and hold the Multi-
function button until the blue indicator light remains lit
after blinking.
• If you turn it on for the first time, it proceeds into Pairing
mode immediately.
2 Search for and pair with your phone according to your
phone's user guide. (Bluetooth PIN: 0000, 4 zeros)
Understanding various modes
Pairing with your Bluetooth phone

6
• If the pairing is successful, the blue indicator light will
flash 10 times rapidly before entering Standby mode.
• If the blue indicator light remains lit, retry pairing.
Some features may not be supported by your phone.
In Standby mode
Press the Multi-function button to:
• Answer an incoming call
• Redial the last number called
Press and hold the Multi-function button to:
• Make a voice-activated call
• Reject an incoming call
Press and hold [+] and [-] at the same time to turn the
indicator light on or off.
When the headset and the phone are paired, the
headset attempts to reconnect automatically each
time it turns on. Otherwise, press the Multi-function
button to reconnect.
Using call features

7
E
ng
li
s
h
In Active mode
Press the Multi-function button to:
• End a call
• Transfer a call from the phone to the headset
Press and hold the Multi-function button to:
• Place a call on hold
• Answer a second call
• Retrieve a call on hold
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off or on.
FCC
FCC ID: A3LWEP300
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
The device and its antenna must not be co-located or operating
in conjunction with any other antenna or transmitter.
Safety approvals