Samsung HS3000 User manual

English...................................................................................1
Français...............................................................................31
Italiano.................................................................................63
Ελληνικά..............................................................................98
Nederlands........................................................................137

1
English
Contents
Getting started
Headset Overview ...................................................................................4
Button functions.......................................................................................5
Charging the headset ..............................................................................6
Wearing the headset ...............................................................................8
Using your headset
Turning the headset on or off.................................................................10
Using voice prompts..............................................................................10
Pairing and connecting the headset ......................................................13
Pairing via the Active pairing feature .....................................................17
Using call functions................................................................................18
Using music control functions ...............................................................22
Resetting the headset............................................................................23
Appendix
Frequently asked questions...................................................................24
Warranty and parts replacement ...........................................................26
Specications ........................................................................................27
Correct disposal of this product.............................................................28
Correct disposal of batteries in this product ..........................................29

2
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval
system, without the prior written permission of Samsung Electronics.
Trademarks
• SAMSUNG, and the SAMSUNG logo are registered trademarks of
Samsung Electronics.
• Bluetooth®is a registered trademark of the Bluetooth SIG, Inc. worldwide.
More information about Bluetooth is available at www.bluetooth.com.
• All other trademarks and copyrights are the property of their respective
owners.
Please read this manual before operating your headset, and keep it for future
reference.
Illustrations in this User Manual are only provided for reference and may differ
from actual product appearance.

3
English
Safety precautions
To prevent injury to yourself and others or damage to your device, read the safety
information about your device before using the device.
• Comply with all safety warnings and regulations regarding mobile device usage
while operating a vehicle.
• Donotdisassemble,modify,orrepairyourdevice.Anychangesormodicationsto
your device can void your manufacturer’s warranty. If your device needs servicing,
take your device to a Samsung Service Centre.
• Do not bite or suck the device. Children or animals can choke on small parts.
• Do not store your device in very hot or very cold areas. It is recommended to
use your device at temperatures from 5 °C to 35 °C. Extreme temperatures can
damage the device and reduce the charging capacity and life of your device and
battery.
• Do not use your device while it is charging or touch your device with wet hands.
• Keep your device dry. Humidity and liquids may damage the parts or electronic
circuits in your device. Water damage to your device can void your manufacturer’s
warranty.
• Do not use your device outdoor during a thunderstorm. Doing so may result in
electric shock or device malfunction.

4
Getting started
This section explains the basic parts and functions of your Bluetooth headset.
Headset Overview
• Make sure you have the following items: Travel adapter, headset,
3.5mm stereo headphone, and user manual.
• The supplied items may be changeable depending on your region.
Volume button
Mode button 3.5mm audio jack
Microphone
Indicator light
Power switch
Talk button
Multifunction jack
Control button

5
English
Button functions
Button Function
Power
Switch • Slide up or down to turn the headset on or off.
Talk
• Press to make or answer a call.
• Press to end a call.
• Press and hold to enter Pairing mode.
Volume
• Press to adjust the volume.
• Press and hold to turn the microphone on or off.
• In Pairing mode, press and hold the Volume up
button until you hear a beep. It makes turn the
Multi-point feature on.
• In Pairing mode, press and hold the Volume down
button until you hear a beep. It makes turn the
Multi-point feature off.
Mode • While listening to music, press to change
the SoundAlive mode.
• Presstocontrolthemusicles.

6
Charging the headset
The headset has a rechargeable internal battery which is non-removable.
Makesuretheheadsetisfullychargedbeforeusingitforthersttime.
To check the battery level, see page 7.
1Connect the charger to the multifunction jack (see below images).
2Plug the charger in to the wall outlet. During charging, the indicator light will
turn red. If charging does not begin, unplug the travel adapter and plug it in
again.
3When the headset is fully charged, the red indicator light changes to blue.
Unplug the travel adapter from the wall outlet and the headset.

7
English
• Use only Samsung-approved chargers. Unauthorised or Non-Samsung
chargers could cause damage to the headset or in extreme circumstances
an explosion, it could also invalidate any warranty on the product.
• Repeatedly charging and discharging of the headset, over time will cause
the battery performance will diminish. This is normal for all rechargeable
batteries.
• Never make or receive calls while charging, always disconnect your
headset from the charger and answer the call.
• To save energy, unplug the charger when not in use. The charger does
not have a power switch, so you must unplug the charger from the electric
socket when not in use to avoid wasting power. The charger should
remain close to the electric socket and easily accessible while charging.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
When the headset charge falls low
When the battery is running out of power, the headset beeps and the indicator
lightashesred.Tochargethebattery,seepage6.Iftheheadsetpowersoff
during a call, the call will be automatically transferred to the phone.
Checking the battery level
To check the battery level, hold down the Volume down button and the Talk
button at the same time. Depending on the battery level, the indicator light
ashes5timesinoneofthefollowingcolours:

8
Battery level Indicator
light colour Voice prompt
Above 80% Blue “Headset battery level is high”
80 ~20% Violet “Headset battery level is medium”
Below 20% Red “Headset battery level is low”
Wearing the headset
Use the supplied 3.5mm stereo headphone.
1Connect the headphone to the headset.
2Clip the headset to your clothes using it’s
shirt clip.

9
English
Using your headset
This section explains how to turn the headset on or off, pair and connect the
headset to the phone, and use various functions.
• Activated functions and features may differ depending on the phone
type.
• Some devices, especially those that are not tested or approved by
the Bluetooth Special Interest Group (SIG), may be incompatible
with your headset.
To ensure you get the best performance from your headset
• Keep the distance between your headset and device as small as
possible and avoid placing your body or other objects in the signals
path.
• If you usually use your mobile phone with your right hand, wear the
headset on your right ear.
• Covering your headset or device could effect its performance so
keep contact to a minimum.

10
Turning the headset on or off
• To turn the headset on, slide down the power switch. The blue indicator light
ashes4timesandyouwillhear“Power on.”
• Toturntheheadsetoff,slideupthepowerswitch.Theindicatorlightashes
red then turns off and you will hear “Power off.”
Using voice prompts
Voice prompts will inform you about the current status of the headset and
usage instructions. If you can’t hear any voice prompt, make sure the voice
prompt feature is turned on. To turn the voice prompt on or off, see page 11.
Changing the language for the voice prompt
InPairingmode,pressbothvolumebuttonssimultaneouslytoconrm
language. The headset provides following these languages: English, Spanish,
French, German and Chinese. The default setting is English.
Iftheheadsetisturnedonforthersttime,youwillhear“Thank you
for using the Samsung Bluetooth headset. Press both volume buttons
simultaneously to conrm language.”

11
English
Turning the voice prompt on or off
To turn voice prompts on
In Pairing mode, press and hold the Volume up button for 4 seconds. You will
hear “Voice prompt is on”.
To enter Pairing mode, see page 13.
To turn voice prompts off
In Pairing mode, press and hold the Volume down button for 4 seconds. You
will hear “Voice prompt is off”.
The following voice prompts are available depending on the status:
Status Voice prompt
When you turn the
headset on or off “Power on” or
“Power off”
When you select a
language for the voice
prompt “Language name selected”

12
Status Voice prompt
When you enter Pairing
mode
“Ready to pair. Search for the headset from the
Bluetooth menu. Enter 0000 if prompted for a
PIN”
When you turn the voice
prompt on or off “Voice prompt is on” or
“Voice prompt is off”
When you turn Multi-point
feature on or off “Multi-point mode is on” or
“Multi-point mode is off”
When you connect the
headset to a phone “Device is connected”
When you connect the
headset to two phones “Two devices are conected”
When you disconnect the
headset from a phone “Device is disconnected”
When you reject or end a
call “Call terminated”
When you check the
battery level
“Headset battery level is high” or
“Headset battery level is medium” or
“Headset battery level is low”

13
English
Even though the voice prompt feature has been turned off, you can
always hear the following voice prompts.
• “Language name selected”
• “Voice prompt is on” or “Voice prompt is off”
Pairing and connecting the headset
Pairing means unique and encrypted wireless connection between two
Bluetooth devices when they agree to communicate with each other. In order
to pair two Bluetooth devices, a PIN has to be exchanged between the two
devices.
Pairing and connecting the headset with a phone
1Enter Pairing mode.
• With the headset turned on, press and hold the Talk button for 4
seconds.The blue indicator light stays lit and you will hear “Ready to
pair. Search for the headset from the Bluetooth menu. Enter 0000 if
prompted for a PIN.” If you can’t hear any voice prompt, make sure the
voice prompt feature is turned on. To turn the voice prompt on or off,
see page 11.
• Iftheheadsetisturnedonforthersttime,itwillgointoPairingmode
immediately and the Pairing mode stays for 3 minutes.

14
2Activate the Bluetooth feature on your phone and search for the headset
(see your phone’s user manual).
3Select the headset (HS3000) from the list of devices found by your phone.
4If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect
the headset to your phone. You will hear “Device is connected.”
• Your headset supports the Simple Pairing feature which allows the
headset to be paired with a phone without requesting a PIN. This
feature is available for phones that are compliant with Bluetooth
version 2.1 or higher.
• IfyourphonesupportsAdvancedAudioDistributionProle(A2DP),
you can also listen to music with your headset.
The headset can also be paired via the Active Paring feature. See page 17.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2
Bluetooth phones at the same time.
1 ConnectwiththerstBluetoothphone.
2Activate the Multi-point feature. See page 15.

15
English
3Activate the Bluetooth feature on the second Bluetooth phone and search
for the headset (see your phone’s user manual).
4Select the headset (HS3000) from the list of devices found by the second
Bluetooth phone.
5If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset
to the second Bluetooth phone.
6 ReconnecttotheheadsetfromtherstBluetoothphone.
You will hear “Two devices are conected.”
When connecting the headset to 2 Bluetooth phones, some phones
may not be able to connect as a second Bluetooth phone.
To turn Multi-point feature on or off
• In Pairing mode, press and hold the Volume up button until you hear
a beep. You will hear “Multi-point mode is on.”
• In Pairing mode, press and hold the Volume down button until you
hear a beep. You will hear “Multi-point mode is off.”
Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an
MP3 player. The way is same as phones.

16
When the phone and the music device are connected with the headset, you
can make or answer a call while you are listening to music from the music
device.
For more information about control functions, see page 22.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone to remove the
device from your pairing list.
Reconnecting the headset
If the headset loses the connection to the paired phone,
• Press the Talk button on the headset or use the Bluetooth menu on your
phone.
If you want to reconnect the headset to the paired music device,
press button on the headset.
• Your headset will attempt to automatically reconnect each time you turn it
on. This feature may be unavailable on some phones.
If the Multi-point feature is activated, your headset will attempt to
reconnect to the two most recently connected phones.

17
English
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically look for a Bluetooth
device and try to make a connection with it.
This feature is available for mobile phones, but the phone’s Bluetooth visibility
option must be set to on.
1In Pairing mode, press and hold the Talk button to enter Active pairing
mode. To enter Pairing mode, see page 13.
2The violet indicator light turns on and the headset will search for a
Bluetooth phone within range, and attempt to pair with it.
• Ensure the phone you wish to connect to is within range of the
headset. Place the headset and phone close to each other to avoid
pairing with other devices.
• The headset will attempt active paring for up to 20 seconds.
• The Bluetooth phone you want to connect with must not be paired with
other devices. If the phone is already connected to another device,
end the connection and restart the Active pairing feature.
• This feature may not be available on some devices.
• When the headset pair with your phone, a connection is made
throughtheHands-FreeProle.Tomakeaconnectionthrough
anotherprole,suchasAdvancedAudioDistributionProle(A2DP),
check the phone’s user manual on how to pair the Bluetooth device.

18
Using call functions
Available call functions may differ from phone to phone.
Making a call
Redialling the latest number
To redial the latest number on the primary phone, press the Talk button.
To redial the latest number on the secondary phone, press the Talk button twice.
For some phones, pressing the Talk button opens the call log list.
Press the Talk button again to dial the selected number.
Dialling a number by voice
Press and hold the Talk button and say a name.
• You can dial a number only on the primary phone.
• ThisfunctionisonlyavailablewhenusingtheHands-Freeprole.
For more information, see your phone’s user manual.