Samsung HM7000 User manual

Headset
HM7000

English ........................................................................................ 1
Español......................................................................................31
Português .................................................................................64

1
English
Contents
Safety information ......................................................................................................................................3
Getting started
Your headset overview..............................................................................................................................4
Button functions..........................................................................................................................................5
Charging the headset................................................................................................................................6
Wearing the headset............................................................................................................................... 10
Using your headset
Turning the headset on or off ............................................................................................................. 12
Using the voice command and voice prompts............................................................................ 12
Pairing and connecting the headset................................................................................................ 16
Using call functions ................................................................................................................................. 21
Resetting the headset............................................................................................................................. 24
Appendix
Frequently asked questions................................................................................................................. 25
Warranty and parts replacement....................................................................................................... 27
Specifications............................................................................................................................................. 28
Correct disposal of this product......................................................................................................... 29
Correct disposal of batteries in this product................................................................................. 30
English

2
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or transmitted
in any form or by any means, electronic or mechanical, including photocopying,
recording, or storing in any information storage and retrieval system, without the prior
written permission of Samsung Electronics.
Trademarks
SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung•
Electronics.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More•
information about Bluetooth is available at www.bluetooth.com
All other trademarks and copyrights are the property of their respective owners.•
Please read this manual before operating your headset, and keep it for future reference.
Graphics used in this manual are for illustration purposes. The actual products may vary.

3
English
Safety information
To prevent injury to yourself and others or damage to your device, read the safety
information about your device before using the device.
Comply with all safety warnings and regulations regarding mobile device usage•
while operating a vehicle.
Do not disassemble, modify, or repair your device. Any changes or modifications to•
your device can void your manufacturer’s warranty. If your device needs servicing,
take your device to a Samsung Service Centre.
Do not bite or suck the device. Children or animals can choke on small parts.•
Do not store your device in very hot or very cold areas. It is recommended to use•
your device at temperatures from 5 °C to 35 °C. Extreme temperatures can damage
the device and reduce the charging capacity and life of your device and battery.
Do not use your device while it is charging or touch your device with wet hands.•
Keep your device dry. Humidity and liquids may damage the parts or electronic•
circuits in your device. Water damage to your device can void your manufacturer’s
warranty.
Do not use your device outdoor during a thunderstorm. Doing so may result in•
electric shock or device malfunction.

4
Getting started
Your headset overview
Make sure you have the following items: headset, travel adapter, portable
charger, ear hook, ear rubbers and user manual. The supplied items may vary.
Voice button
Indicator light
Charging socket
Talk button
Secondary microphone
Primary microphone
Volume button
Earpiece

5
English
Button functions
Button Function
Talk
Press and hold to turn the headset on.•
Press and hold for 3 seconds to turn the headset off.•
With the headset turned off, press and hold for 3 seconds•
to enter Pairing mode.
Press to answer or end a call.•
Press to redial the latest number.•
Press and hold to reject an incoming call.•
Press and hold to place a call on hold.•
Volume
Press to adjust the volume.•
Press and hold to turn the microphone on or off during a•
call.
Press and hold both Volume buttons simultaneously to•
turn the indicator light on or off.
Voice I•n Pairing mode, press and hold to select a language.
In Standby mode, press to activate the Voice command.•

6
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make sure
the headset is fully charged before using it for the first time.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung
chargers could cause damage to the headset or in extreme circumstances an
explosion, it could also invalidate any warranty on the product.
Charging the headset with the travel adapter
1Connect the travel adapter to the charging socket on the headset.
2Plug the travel adapter in to the wall outlet. During charging, the indicator light
will turn red. If charging does not begin, unplug the travel adapter and plug it in
again.
3When the headset is fully charged, the red indicator light changes to blue. Unplug
the travel adapter from the wall outlet and the headset.

7
English
Charging the headset with the portable charger
1To charge the portable charger connect the travel adapter as shown below. When
the portable charger is fully charged the indicator light will change to Blue.
2To open the portable charger follow the directions below.

8
3Insert the headset into the portable charger and switch the portable charger on.
4Once fully charged the indicator light on the headset will change from Red to
Blue, at this point switch the portable charger off.
On
off
Your portable charger will discharge if you fail to switch it off once the•
headset has finished charging.
With the headset in the portable charger and a mains charger attached, the•
headset will be charged first followed by the portable charger.
With the headset placed in the portable charger you should only connect a•
mains charger to the portable charger and never directly to the headset. To
just charge the headset please remove it from the portable charger first.
Repeatedly charging and discharging of the headset, over time will cause•
the battery performance to diminish. This is normal for all rechargeable
batteries.

9
English
Never make or receive calls while charging, always disconnect your headset•
from the charger and answer the call.
To save energy, unplug the charger when not in use. The charger does not•
have a power switch, so you must unplug the charger from the electric
socket when not in use to avoid wasting power. The charger should remain
close to the electric socket and easily accessible while charging.
The socket-outlet shall be installed near the equipment and shall be easily•
accessible.
Checking the battery level
To check the battery level, press and hold the Volume down button and the Talk
button at the same time. Depending on the battery level, the indicator light flashes 5
times in one of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red

10
When the headset battery is low
The headset indicator light flashes red and you can hear beeps. If the headset powers
off during a call, the call will be automatically transferred to the phone.
Wearing the headset
Depending on which ear you are going to
wear the headset, simply adjust the ear hook
accordingly.
You can also use the optional ear rubbers instead of the ear hook. Remove the
earpiece cover and attach the ear rubber. Then, rotate the ear rubber left or
right slightly depending on which ear you are going to wear the headset.
RightLeft 

11
English
Using your headset
This section explains how to turn the headset on or off, pair and connect the headset
to the phone, and use various functions.
Activated functions and features may differ depending on the phone type.•
Some devices, especially those that are not tested or approved by the•
Bluetooth Special Interest Group (SIG), may be incompatible with your
headset.
To ensure you get the best performance from your headset
Keep the distance between your headset and device as small as possible and avoid•
placing your body or other objects in the signals path.
If you usually use your mobile phone with your right hand, wear the headset on your•
right ear.
Covering your headset or device could effect its performance so keep contact to a•
minimum.

12
Turning the headset on or off
To turn the headset on
Press and hold the Talk button until the blue indicator light flashes 4 times.
Turning the Headset on for the first time, it will automatically enter pairing
mode for approx 3 minutes. For more information, see page 16.
To turn the headset off
Press and hold the Talk button for 3 seconds. The indicator light flashes blue and red
then turns off.
Using the voice command and voice prompts
Voice prompts will inform you about the current status of the headset and usage
instructions. You can also control your headset using your voice but to do so you must
ensure the voice prompt feature is turned on.
Turning the voice prompts on or off
To turn the voice prompts on
In Pairing mode, press and hold the Volume up button for 3 seconds. You will hear
“Voice prompts on”. To enter Pairing mode, see page 16.

13
English
To turn the voice prompts off
In Pairing mode, press and hold the Volume down button for 3 seconds. You will hear
“Voice prompts off”.
Changing the language
The headset provides the following languages: English and German or English and
French depending on the region you purchase the device. The default setting is
English.
In Pairing mode, press and hold the Voice button to select a language.•
Using the voice command
1In Standby mode, press the Voice button.
2Wait until the headset asks you to “Say a command”.
3Say one of the voice commands loudly and clearly. See page 14.
If you say a command with a low tone of voice or don’t say any command•
within 5 seconds, you will hear “Say it again” the first time and then “Cancelled”
if nothing is said the second time. If you hear “Say it again”, please say a
command clear and in a louder voice. Even if you say so and hear “Cancelled”,
press the Voice button again.
To stop the whole process of voice command, press the Voice button once•
again while recognizing your voice command. Then you will hear “Cancelled”.

14
Your headset may inadvertently recognize voice commands from•
background sounds that are louder than your voice.
You can not use voice commands while listening to music with your headset.•
List of voice commands
Action Command
To cancel the Voice Command “Cancel”
To enter pairing mode “Pair”
To redial the last number dialed on the
primary phone “Redial”
To answer or reject a call after you hear
“Incoming call. Say Answer or Ignore”
“Answer”, “Yes”
or “Ignore”, ”No”
To turn off the headset
“Power off”
After saying “Power off“, you will hear “Are
you sure to power off?” Say “Yes” to turn off
the headset or “No” to cancel it.

15
English
List of voice prompts
Status Voice prompt
When you turn the headset
on or off
“Power on” or
“Power off”
When you select a language
for the voice prompt “<Language name> selected”
When you enter Pairing
mode
“Ready to pair. Go to phone or computer Bluetooth
menu. Enter 0000, if required”
When you turn the voice
prompt on or off
“Voice prompts on” or
“Voice prompts off”
When you turn Multi-point
feature on or off
“Multi-point on” or
“Multi-point off”
When you connect the
headset to the devices
“Device connected” or
“Two devices connected”
When you disconnect the
headset from a device “Device disconnected”
When a call comes in
“Incoming call. Say Answer or Ignore”

16
Status Voice prompt
When you reject or end a
call “Call terminated”
When you check the battery
level
“Headset battery level is high” or
“Headset battery level is medium” or
“Headset battery level is low”
Pairing and connecting the headset
Pairing means a unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough.
Pairing and connecting the headset with a phone
1Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)
With the headset turned off, press and hold the Talk button for 3 seconds.•
With the headset turned on, press and hold the Volume up and the Talk button•
at the same time for 3 seconds.

17
English
If the headset is turned on for the first time, it will go into Pairing mode•
immediately.
2Activate the Bluetooth feature on your phone and search for the headset (see your
phone’s user manual).
3Select the headset (HM7000) from the list of devices found by your phone.
4If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the
headset to your phone. Once pairing is completed, the headset will attempt to
reconnect each time you turn it on.
Your headset supports the Simple Pairing feature which allows the headset•
to be paired with a phone without requesting a PIN. This feature is available
for phones that are compliant with Bluetooth version 2.1 or higher.
If your phone supports A2DP (Advanced Audio Distribution Profile), you•
can also listen to music with your headset.
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth
device within range and tries to make a connection with it.
Make sure the phone’s Bluetooth visibility option is set on.
In Pairing mode, press and hold the Talk button on the headset. The indicator light•
colour changes to violet from blue.

18
The Bluetooth phone you want to connect with must not be paired with•
other devices. If the phone is already connected to another device, end the
connection and restart the Active pairing feature.
This feature may not be supported on some devices.•
When the headset pairs with your phone, a connection is made through the•
Hands-Free Profile. To make a connection through another profile, check the
phone’s user manual on how to pair the Bluetooth device.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2 Bluetooth
phones at the same time.
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button. The blue indicator
light flashes twice.
To turn Multi-point feature off
In Pairing mode, press and hold the
Volume down button. The red indicator
light flashes twice.
1After connecting with the first Bluetooth phone, enter Pairing mode again.
2Activate the Bluetooth feature on the second Bluetooth phone and search for the
headset (see your phone’s user manual).
3Select the headset (HM7000) from the list of devices found by the second
Bluetooth phone.