Samsung HM-3300 User manual

Bluetooth
HEADSET
HM3300
Please read this manual before operating your headset, and keep it for future reference.
Understand all safety precautions before using your headset to ensure safe and proper use.
Graphics used in this manual are for illustration purposes. The actual products may vary.

Safety precautions
•• When using your headset while driving, follow local regulations in the region you are in.
•• Never disassemble or modify your headset for any reason. Doing this may cause the
headset to malfunction or become combustible. Bring the headset to an authorised
service centre to repair it.
•• Keep your device and all accessories out of the reach of small children or animals.
Small parts may cause choking or serious injury if swallowed.
•• Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above 45 °C).
Extreme temperatures can cause the deformation of the device and reduce the
charging capacity and life of your device.
•• Do not allow your device to get wet — liquids can cause serious damage. Do not handle your
device with wet hands. Water damage to your device can void your manufacturer’swarranty.
•• Avoid using your device’s light close to the eyes of children or animals.
•• Do not use the device during a thunderstorm. Thunderstorms can cause the device
to malfunction and increase the risk of electric shock.
Excessive exposure to loud sounds can cause hearing damage. Exposure to
loud sounds while driving may distract your attention and cause an accident.
Use only the minimum volume setting necessary to hear your conversation.
Instructional icons
Before you start, familiarise yourself with the icons you will see in this manual:
Warning—situations that could cause injury to yourself or others
Note—notes, usage tips, or additional information

Getting started
Turning the headset on or off
To turn the headset on
Slide the Power switch on. The blue indicator light flashes 4 times.
Turning the headset on for the first time, it will automatically enter pairing mode
for approx. 3 minutes.
To turn the headset off
Slide the Power switch off. The indicator light flashes blue and red then turns off.
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Ensure that you fully
charge the battery before using the headset for the first time.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers
may cause an explosion or damage to the headset and could invalidate any
warranty on the product.
1Connect the travel adatper to the charging socket on the headset.
2Plug the travel adatper in to the wall outlet. During charging, the indicator light will turn red. If
charging does not begin, unplug the travel adapter and plug it in again.
3When the headset is fully charged, the red indicator light changes to blue.
Unplug the travel adapter from the wall outlet and the headset.
• Repeatedly charging and discharging of the headset, over time will cause the
battery performance to diminish. This is normal for all rechargeable batteries.
• Never make or receive calls while charging, always disconnect your headset from

the charger and answer the call.
Checking the battery level
To check the battery level, press and hold the Volume down button and the Talk button at the
same time. Depending on the battery level, the indicator light flashes 5 times in one of the
following colors:
Battery level Indicator light color
Above 80% Blue
80 ~20% Violet
Below 20% Red
When the battery power is low
The headset beeps and the indicator light flashes red. If the headset powers off during a call, the
call will be automatically transferred to the phone.
Wearing the headset
Depending on which ear you are going to wear the headset, simply adjust the ear hook
accordingly.
You can also use the optional ear rubbers instead of the ear hook. Remove
the earpiece cover and attach the ear rubber. Then, rotate the ear rubber left or
right slightly depending on which ear you are going to wear the headset.

Turning the indicator light on or off
The Headset status light is there to show you the current status of your headset, but if it bothers
you at night, you can turn it off.
•Press and hold both Volume buttons simultaneously to turn the indicator light on or off.
•
You cannot switch the indicator off while in pairing mode.
•The indicator light will always work when the headset is turned on or off, when
a call is received, in Pairing mode and when the battery is low.
Using your headset
• Activated functions and features may differ depending on the phone type.
• Some devices, especially those that are not tested or approved by Bluetooth SIG,
may be incompatible with your headset.
To ensure you get the best performance from your headset.
• Keep the distance between your headset and device as small as possible and avoid placing your
body or other objects in the signals path.
• If you usually use your mobile phone with your right hand, wear the headset on your right ear.
• Covering your headset or device could effect its performance so keep contact to a minimum.

Pairing and connecting the headset
Pairing means unique and encrypted wireless connection between two Bluetooth devices when
they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough to each other.
Pairing and connecting the headset with a phone
NFC(Near Field Communication) Pairing
With NFC-enabled Samsung phone,pairing is simple.
1. Activate the NFC feature on your phone.
• Make sure your phone is unlock mode.
2. With the headset turned on, touch your headset’s front side to the phone’s NFC antenna.
3. Hold the headset to the phone until NFC pairing completes.
• Some NFC-enabled devices couldn’t compatible with HM3300.
• For details on NFC, see your phone’s user manual.
Manual Pairing
1Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)
• With the headset turned on, press and hold the Talk button for 3 seconds.
2Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user
manual).
3Select the headset (HM3300) from the list of devices found by your phone.
4If requested, enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your
phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on.

Your headset supports the Simple Pairing feature which allows the headset to be
paired with a Bluetooth device without requesting a PIN. This feature is available
for devices that are compliant with Bluetooth version 2.1 or higher.
Active Pairing
With the Active pairing feature, your headset automatically looks for a Bluetooth device
within range and tries to make a connection with it.
Make sure the phone’s Bluetooth visibility option is set on.
•In Pairing mode, press and hold the Talk button on the headset. The indicator light
color changes to violet from blue. The headset will attempt active paring for up to
20 seconds.
•
The Bluetooth phone you want to connect with must n
ot be paired
with other
devices. If the phone is already connected to another device, end the connection
and restart the Active pairing feature.
•This feature may not be supported on some devices.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button. The blue indicator
light flashes twice.
To turn Multi-point feature off
In Pairing mode, press and hold the
Volume down button. The red indicator
light flashes twice.
1After connecting with the first Bluetooth phone, enter Pairing mode again.
2Activate the Bluetooth feature on the second Bluetooth phone and search for the headset
(see your phone’s user manual).

3Select the headset (HM3300) from the list of devices found by the second Bluetooth
phone.
4If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the second
Bluetooth phone.
5Reconnect to the headset from the first Bluetooth phone.
Some phones may not be able to connect as a second Bluetooth phone.
Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an MP3 player. The
process of connecting to a music device is the same as for connecting with a phone. When
connected to both devices (phone and music device) you can make or receive a call on the phone
while listening to music from the music device.
You cannot control playback using your headset.
Reconnecting the headset
If the connection is lost while in use:
• Press the Talk button on the headset or use the Bluetooth menu on your phone.
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on. If the Multi-point feature is activated, your
headset will attempt to reconnect to the two most recently connected devices.
This feature may not be supported on some devices.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone.

Using call functions
•Available call functions may vary depending on the phone.
• Some functions are only available on the Hands-Free profile.
Making a call
Redialing the latest Number dialed
To redial the latest number of the primary phone, press and hold the Talk button.
To redial the latest number of the secondary phone, press the Talk button twice.
Some phones open the call log list on the first press of the Talk button. Press the
Talk button again to dial the selected number.
Dialing a number by voice
Press the Talk button. This function is only available on the primary phone.
Answering a call
When you hear incoming call tones, press the Talk button to answer a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
If you receive calls on both connected phones at the same time you can only
answer or reject the call on the primary phone.
Ending a call
Press the Talk button to end a call.
Options available during a call

You can use the following functions during the call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
You will hear a beep when the volume level of the headset reaches it’s lowest or
highest level.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that the person with
whom you are speaking cannot hear you. When the microphone is turned off, the headset beeps
at regular intervals. Press and hold the Volume up or down button again to turn the microphone
back on.
Transferring a call from the phone to the headset
Press the Talk button to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
Answering a second call
• Press the Talk button to end the first call and answer a second call
when you hear call waiting tones.
• Press and hold the Talk button to place the first call on hold and answer a
second call when you hear call waiting tones.To switch between the current call and the held call,
press and hold the Talk button.