Samsung HM3500 User manual

English...................................................................................1
Svenska...............................................................................29
Suomi...................................................................................57
Dansk...................................................................................85
Norsk .................................................................................113

English
1
Contents
Getting started
Your headset overview ..................................................................................3
Button functions.............................................................................................4
Charging the headset ....................................................................................5
Wearing the headset .....................................................................................7
Using your headset
Turning the headset on or off.......................................................................10
Pairing and connecting the headset ............................................................ 11
Pairing via the Active pairing feature ...........................................................15
Using call functions......................................................................................16
Connecting the headset with a music device ..............................................20
Appendix
Frequently asked questions.........................................................................22
Warranty and parts replacement .................................................................24
Correct disposal of this product...................................................................25
Correct disposal of batteries in this product ................................................26
Specications ..............................................................................................27
English

2
Take the time to read through this user manual before using HM3500
Bluetooth Headset.
Bluetooth
®
is a registered trademark of the Bluetooth SIG, Inc.
worldwide — Bluetooth QD ID: B016579
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this may cause the
headset to malfunction or become combustible. Bring the headset to an authorised
service centre to repair it or replace the battery.
When using your headset while driving, follow local regulations of the country
or region you are in.
Avoid storage at high temperatures (above 50 °C/122 °F), such as in a hot vehicle
or in direct sunlight, as this can damage performance and reduce battery life.
Do not expose the headset or any of its supplied parts to rain or other liquids.
Excessive exposure to sound at high volumes can cause hearing damage.
Always turn the volume down before plugging the earphones into an audio source
and use only the minimum volume setting necessary to hear your conversation
or music.
•
•
•
•

English
3
Getting started
This section explains what to remember for the proper use of your Bluetooth
headset.
Your headset overview
Make sure you have the following items with your headset: Travel adapter,
neckstrap headset, shirt clip, ear rubbers, and user manual.
The items supplied with your headset may vary depending on your region.
•
•
Earpiece
Power switch
Volume button
Ear hook
Secondary
microphone
Talk button
Primary
microphone
Multifunction jack
Indicator light

4
Button functions
Button Function
Power Slide up or down to turn the headset on or off.
Talk
Press to make or answer a call.
Press to end a call.
Press and hold to enter Pairing mode.
•
•
•
Volume
Press to adjust the volume.
Press and hold to turn the microphone on or off.
In Pairing mode, press and hold the Volume up button
to turn the Multi-point feature on.
In Pairing mode, press and hold the Volume down
button to turn the Multi-point feature off.
•
•
•
•
You can hear a beep when the volume level of the headset reaches to the lowest
or highest level.

English
5
Charging the headset
This headset has a rechargeable internal battery which is non-removable.
Ensurethatyoufullychargethebatterybeforeusingtheheadsetforthersttime.
1Plug the small end of the travel adapter into the multifunction jack.
2Plug the large end of the travel adapter into a power outlet. During charging,
the indicator light will turn red. If charging does not begin, unplug the travel
adapter and plug it in again.

6
3When the headset is fully charged, the red indicator light changes to blue.
Unplug the travel adapter from the power outlet and the headset.
Use only a Samsung-approved travel adapter. Unauthorised travel adapters
may cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because
it is a consumable part.
When a call comes in while charging, disconnect your headset from the travel
adapter and answer the call.
•
•
•
When the battery power is low
The headset beeps when the battery power is low. When this happens, recharge
the battery. If the headset powers off during a call, the call will automatically transfer
to your phone.
Checking the battery level
At the same time, press and hold the Volume down and the Talk button. Depending
onthebatterylevel,theindicatorlightashes5timesinoneofthefollowingcolours:

English
7
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red
Wearing the headset
Using as a mono headset
Place the headset on your ear.

8
Depending on what ear you are going to wear the headset, simply remove and
replace the ear hook.
Right Left
You can also use the ear rubber instead of the ear hook. Remove the earpiece cover
and attach the ear rubber. Then, rotate the ear rubber left or right slightly depending
onwhatearyouaregoingtoweartheheadset.Ifitdoesnottyourear,replace
it with the other.
Right Left

English
9
Using as a stereo headset
Use the supplied neckstrap headset with the shirt clip.
1Remove the ear hook and attach the shirt clip.
2Plug the connector of the neckstrap headset into the multifunction jack on the
headset and wear the neckstrap headset.
3Clip the headset to your clothes using the shirt clip.

10
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Activated functions and features may differ depending on your type of phone.
Some devices, especially those that are not tested or approved by the Bluetooth SIG,
may be incompatible with your headset.
•
•
Turning the headset on or off
To turn the headset on, slide up the power switch. The blue indicator light
ashes4times.
To turn the headset off, slide down the power switch. The indicator light turns off
after the blue indicator light changes to red.
•
•

English
11
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two Bluetooth-
enabled devices, such as a Bluetooth phone and your Bluetooth headset.
To use the headset with other Bluetooth devices, the devices must be paired. When
trying to pair the two devices, keep the headset and the other device reasonably
close together. After pairing, you can connect the two devices.
Pairing and connecting the headset to a phone
1Enter Pairing mode.
Turn on your headset and press and hold the talk button until the blue indicator
light stays lit.
Ifyouturntheheadsetonforthersttime,itproceedsintoPairingmode
immediately.
If the headset fails to reconnect to the device that has been paired with
before, it automatically enters Pairing mode. The Pairing mode stays for
3 minutes.
•
•
•

12
2Activate the Bluetooth feature on your phone and search for the headset (see
your phone’s user manual).
3Select the headset (HM3500) from the list of devices found by your phone.
4Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your
phone.
Your headset supports the Simple Pairing feature which allows the headset to be
paired with a phone without requesting a PIN. This feature is available for phones that
are compliant with Bluetooth version 2.1 or higher.
The headset also can be paired via the Active Paring feature, see page 15.

English
13
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two
Bluetooth phones at the same time.
1 AfterconnectingwiththerstBluetoothphone,pressandholdtheTalkbutton
until the blue indicator light stays lit.
2Press and hold the Volume up button to activate the Multi-point feature.
3Activate the Bluetooth feature on the second Bluetooth phone and search
for the headset (see your phone’s user manual).
4Select the headset (HM3500) from the list of devices found by the second
Bluetooth phone.
5Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone.
6Turn the headset off and on. When the headset turns on, it automatically
connects with the two Bluetooth phones.

14
You can set the headset automatically to reconnect to the recently connected
phones each time you turn it on.
To reconnect to the two most recently connected phones, activate the Multi-
point feature. Press and hold the Volume up button in Pairing mode until the
blueindicatorlightashestwice.
To reconnect to only the most recently connected phone, deactivate the Multi-
point feature. Press and hold the Volume down button in Pairing mode until the
redindicatorlightashestwice.
WiththeHands-FreeProle,theheadsetconnectstotwoBluetoothphones.With
theAdvancedAudioDistributionProle,itconnectstooneBluetoothphoneonly.
When the headset connects to two Bluetooth phones, some phones may not
connect to the headset as the second Bluetooth phone.
•
-
-
•
•
Disconnecting the headset
To disconnect the headset from your phone,
Slide down the power switch to turn off the headset.
Use the Bluetooth menu on your phone.
•
•

English
15
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically reconnect
each time you turn the power on.
If the headset does not automatically attempt to reconnect,
Press the Talk button.
Use the Bluetooth menu on your phone.
Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search for a Bluetooth
phone and try to make a connection with it.
1Turn on the headset.
2Enter Pairing mode. See page 11.
3Press and hold the Talk button until the violet indicator light turns on.
The headset will switch to Active Pairing mode, search for a Bluetooth phone
within range, and attempt to pair with it.
•
•

16
Ensure the phone you wish to connect to is within range of the headset. Place the
headset and phone close to each other to avoid pairing with other devices.
The headset will attempt active paring for up to 20 seconds.
The Bluetooth phone you want to connect with must not be paired with other devices.
If the phone is already connected to another device, end the connection and restart
the Active pairing feature.
This feature is available for mobile phones, but the phone’s Bluetooth visibility
option must be set to on.
This feature may be unavailable on some PDAs.
•
•
•
•
•
Using call functions
Making a call
Redialling the last number
Press the Talk button to redial the last number of the most recently connected
phone.
For some phones, pressing the Talk button opens the call log list. Press the Talk
button again to dial the selected number.

English
17
Dialling a number by voice
Press and hold the Talk button, and then say a name to dial a number by voice.
Available call functions may vary by the phone.
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.
When two calls from the two connected phones come in, you can answer the call
oftherstphone.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in. When two calls
fromthetwoconnectedphonescomein,youcanrejectthecalloftherstphone.

18
Using options during a call
You can use the following functions to control your call during a call.
Adjusting the volume
Press the Volume up or down button to adjust the volume.
Muting the microphone
Press and hold the Volume up or down button to turn the microphone off so that
the person with whom you are speaking cannot hear you. When the microphone
is turned off, the headset beeps at regular intervals. Press and hold the Volume up
or down button again to turn the microphone back on.
Transferring a call from the phone to the headset
Press the Talk button to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the Talk button to place the current call on hold.
When the headset is connected with two phones, this function is not available.