Samsung HM1700 User manual

Headset
HM1700

English ................................................................................. 1
Română.............................................................................. 27
Български......................................................................... 54
Srpski ................................................................................. 84
Hrvatski ............................................................................ 110

1
English
Getting started
Your headset overview ................................................................ 4
Button functions........................................................................... 5
Charging the headset .................................................................. 6
Wearing the headset ................................................................... 8
Using your headset
Turning the headset on or off ...................................................... 9
Using voice prompts.................................................................. 10
Pairing and connecting the headset..........................................12
Pairing via the Active pairing feature ......................................... 16
Using call functions.................................................................... 17
Resetting the headset................................................................20
Appendix
Frequently asked questions ......................................................21
Warranty and parts replacement ..............................................23
Specications.............................................................................24
Correct disposal of this product.................................................25
Correct disposal of batteries in this product ..............................26
Contents
English

2
Please read this manual before operating your headset, and keep it for future
reference. Graphics used in this manual are for illustration purposes. The actual
products may vary.
Copyright
Copyright © 2011 Samsung Electronics
This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or storing in any information storage and retrieval
system, without the prior written permission of Samsung Electronics.
Trademarks
• SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung
Electronics.
• Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More
information about Bluetooth is available at www.bluetooth.com.
• All other trademarks and copyrights are the property of their respective owners.

3
English
Safety information
To prevent injury to yourself and others or damage to your device, read the safety
information about your device before using the device.
• Comply with all safety warnings and regulations regarding mobile device usage while
operating a vehicle.
• Donotdisassemble,modify,orrepairyourdevice.Anychangesormodicationsto
your device can void your manufacturer’s warranty. If your device needs servicing,
take your device to a Samsung Service Centre.
• Do not bite or suck the device. Children or animals can choke on small parts.
• Do not store your device in very hot or very cold areas. It is recommended to use your
device at temperatures from 5 °C to 35 °C. Extreme temperatures can damage the
device and reduce the charging capacity and life of your device and battery.
• Do not use your device while it is charging or touch your device with wet hands.
• Keep your device dry. Humidity and liquids may damage the parts or electronic
circuits in your device. Water damage to your device can void your manufacturer’s
warranty.
• Do not use your device outdoor during a thunderstorm. Doing so may result in electric
shock or device malfunction.

4
Getting started
Your headset overview
• Make sure you have the following items: travel adapter, headset, ear
pieces, ear hook and user manual.
• The supplied items may be changeable depending on your region.
Talk button
Indicator light
Microphone
Volume button
Ear hook
Charging socket
Power switch
Earpiece

5
English
Button functions
Button Function
Power
switch • Slide up or down to turn the headset on or off.
Talk
• Press and hold for 3 seconds to enter Pairing mode.
• Press to make or answer a call.
• Press to end a call.
• Press and hold to reject incoming call.
• Press and hold to place a call on hold.
• Press and hold to switch between calls.
Volume • Press to adjust the volume.
• Press and hold to turn the microphone on or off.

6
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make
suretheheadsetisfullychargedbeforeusingitforthersttime.Tocheckthe
battery level see page 7.
1 Connect the charger to the charging socket on
the headset.
2 Plug the charger in to the wall outlet. During
charging, the indicator light will turn red. If
charging does not begin, unplug the travel adapter
and plug it in again.
3 When the headset is fully charged, the red
indicator light changes to blue. Unplug the travel
adapter from the wall outlet and the headset.
• Use only Samsung-approved chargers. Unauthorised or Non-Samsung
chargers could cause damage to the headset or in extreme circumstances
an explosion, it could also invalidate any warranty on the product.
• Repeatedly charging and discharging of the headset, over time will cause
the battery performance to diminish. This is normal for all rechargeable
batteries.

7
English
• Never make or receive calls while charging, always disconnect your
headset from the charger and answer the call.
• To save energy, unplug the charger when not in use. The charger does
not have a power switch, so you must unplug the charger from the electric
socket when not in use to avoid wasting power. The charger should
remain close to the electric socket and easily accessible while charging.
When the headset battery is low
Theheadsetbeepsandtheindicatorlightashesred.Iftheheadsetpowersoff
during a call, the call will be automatically transferred to the phone.
Checking the battery level
To check the battery level, press and
hold the Volume down button and
the Talk button at the same time.
Depending on the battery level, the
indicatorlightashes5timesinone
of the following colours:
Battery level Indicator light colour
Above 80% Blue
80 ~20% Violet
Below 20% Red

8
Wearing the headset
Depending on which ear you are going to
wear the headset, simply adjust the ear
hook accordingly.
You can also use the optional earpiece
cushions instead of the ear hook.
Remove the earpiece cover and attach
the earpiece cushion. Then, rotate the
earpiece cushion left or right slightly
depending on which ear you are going to
weartheheadset.Ifitdoesnottyourear,
replace it with the other.
Using your headset
This section explains how to turn the headset on, pair and connect to the phone,
and use various functions.
Right
Right
Left 
Left 

9
English
• Activated functions and features may differ depending on the phone type.
• Some devices, especially those that are not tested or approved by
Bluetooth SIG, may be incompatible with your headset.
To ensure you get the best performance from your headset
• Keep the distance between your headset and device as small as possible
and avoid placing your body or other objects in the signals path.
• If you usually use your mobile phone with your right hand, wear the headset
on your right ear.
• Covering your headset or device could effect its performance so keep contact
to a minimum.
Turning the headset on or off
To turn the headset on
Slideupthepowerswitch.Theblueindicatorlightashes4timesandyouwill
hear “Power on”.
To turn the headset off
Slidedownthepowerswitch.Theindicatorlightashesblueandredthenturns
off and you will hear “Power off”.

10
Using voice prompts
Voice prompts will inform you about the current status of the headset and usage
instructions. If you can’t hear any voice prompts, make sure the voice prompt
feature is turned on.
Iftheheadsetisturnedonforthersttime,youwillhear“Press both volume
buttons simultaneously to select language”.
Changing the language for the voice prompt
The headset provides the following languages: English and German or English
and French depending on the region you purchase the device. The default
setting is English.
• In Pairing mode, press and hold both volume buttons simultaneously to select
language.
Turning the voice prompt on or off
To turn voice prompts on
• In Pairing mode, press and hold the Volume up button for 3 seconds to turn
theVoiceprompton.Theblueindicatorlightashestwice.Youwillhere
“Ready to Pair. Pin code is 0000” repeatedly from your headset. To enter
Pairing mode, see page 12.

11
English
To turn voice prompts off
• In Pairing mode, press and hold the Volume down button for 3 seconds to
turntheVoicepromptoff.Theredindicatorlightashestwice.Withitturned
off, the repeated mention is stopped.
The following voice prompts are available depending on the status:
Status Voice prompt
When you turn the headset
on or off
“Power On” or “Power Off”
When you enter Pairing mode “Ready to pair. Pin code is 0000”
When you connect the
headset to devices
“Device Connected”
or “2 Devices Connected”
When you disconnect the
headset from the device
“Device Disconnected”
When a call is ended “Call Terminated”

12
Pairing and connecting the headset
Pairing means unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough to each other.
Pairing and connecting the headset with a phone
1 Enter Pairing mode.
• With the headset turned on, press and hold the Talk button for 3 seconds.
The blue indicator light stays lit and you will hear “Ready to pair. Pin code
is 0000”. If you can’t hear any voice prompt, make sure the voice prompt
feature is turned on. To turn the voice prompt on or off, see page 10.
• Iftheheadsetisturnedonforthersttime,itwillgointoPairingmode
immediately and the Pairing mode stays for 3 minutes.
2 Activate the Bluetooth feature on your phone and search for the headset
(see your phone’s user manual).
3 Select the headset (HM1700) from the list of devices found by your phone.
4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the
headset to your phone.

13
English
• Your headset supports the Simple Pairing feature which allows the
headset to be paired with a Bluetooth device without requesting a PIN.
This feature is available for devices that are compliant with Bluetooth
version 2.1 or higher.
• IfyourphonesupportsAdvancedAudioDistributionProle(A2DP),you
can also listen to music with your headset. You cannot control playback
using your headset.
The headset can also be paired via the Active pairing feature, see page 16.
Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected to 2
Bluetooth phones at the same time.
1 ConnectwiththerstBluetoothphone.
2 Press and hold the Talk button for 3 seconds to enter Pairing mode.
3 Press and hold the Volume up button to activate Multi-point feature.
4 Activate the Bluetooth feature on the second Bluetooth phone and search for
the headset (see your phone’s user manual).
5 Select the headset (HM1700) from the list of devices found by the second
Bluetooth phone.

14
6 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset
to the second Bluetooth phone.
7 ReconnecttotheheadsetfromtherstBluetoothphone.
When connecting the headset to 2 Bluetooth phones, some phones may
not be able to connect as a second Bluetooth phone.
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button. The blue indicator
lightashestwice.
To turn Multi-point feature off
In Pairing mode, press and hold the
Volume down button. The red indicator
lightashestwice.
Connecting the headset with a music device
You can also pair and connect your headset with a music device such as an
MP3 player. The process of connecting to a MP3 device is the same as for
connecting with a phone. When connected to both devices (phone and MP3)
you can make or receive a call on the phone while listening to music from the
MP3 device.
• If your headset is already connected with the Bluetooth phone using
AdvancedAudioDistributionProle(A2DP),youcannotconnectwith
another music device.
• You cannot control playback using your headset.

15
English
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone to remove the
device from your pairing list.
Reconnecting the headset
To reconnect to the paired phone
• Press the Talk button on the headset or use the Bluetooth menu on your
phone.
To reconnect to the paired music device
• Press and hold the Volume up button on the headset or use the Bluetooth
menu on your music device.
Your headset will attempt to automatically reconnect each time you turn it on.
This feature may be unavailable on some devices.
If the Multi-point feature is activated, your headset will attempt to reconnect to
the two most recently connected devices.

16
Pairing via the Active pairing feature
With the Active pairing feature, your headset automatically looks for a Bluetooth
device and tries to make a connection with it.
This feature is available for mobile phones, but the phone’s Bluetooth visibility
option must be set to on.
1 In Pairing mode, press and hold the Talk button to enter Active pairing mode.
To enter Pairing mode, see page 12.
2 The violet indicator light turns on and the headset will search for a Bluetooth
phonewithinyourphone′srange,andattempttopairwithit.
• Ensure the phone you wish to connect to is within range of the headset.
Place the headset and phone close to each other to avoid pairing with
other devices.
• The Bluetooth phone you want to connect with must not be paired with
other devices. If the phone is already connected to another device, end
the connection and restart the Active pairing feature.
• This feature may not be available on some devices.
• When the headset is paired with your phone, a connection is made
throughtheHands-FreeProle.Tomakeaconnectionthroughanother
prole,suchasAdvancedAudioDistributionProle(A2DP),checkthe
phone’s user manual on how to pair the Bluetooth device.

17
English
Using call functions
Available call functions may differ from phone to phone.
Making a call
Redialling the latest number
To redial the latest number on the primary phone,
• Press the Talk button.
To redial the latest number on the secondary phone,
• Press the Talk button twice.
For some phones, pressing the Talk button opens the call log list. Press the
Talk button again to dial the selected number.
Dialling a number by voice
Press and hold the Talk button and say a name.
• This function is only available on the primary phone using the Hands-Free
prole.
• This function may not be available on some devices.

18
Answering a call
Press the Talk button to answer a call when you hear incoming call tones.
• If you receive calls on both connected devices at the same time you can
only answer the call on the primary phone.
• When you are listening to music, the music stops during a call.
Ending a call
Press the Talk button to end a call.
Rejecting a call
Press and hold the Talk button to reject a call when a call comes in.
• If you receive calls on both connected devices at the same time you can
only reject the call on the primary phone.
• ThisfunctionisonlyavailablewhenusingtheHands-Freeprole.
Options available during a call
You can use the following functions during a call.