Samsung ARTIK 053s Installation manual

ARTIK 053s Development Kit
Hardware User’s Guide

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
1
Version History ...................................................................................................................................................................2
ARTIK 053s Development Kit Contents .............................................................................................................................3
ARTIK 053s Additional Documentation .............................................................................................................................3
Additional Materials............................................................................................................................................................3
ARTIK 053s Development Kit Overview ............................................................................................................................4
ARTIK 053s Main Components....................................................................................................................................4
ARTIK 053s Development Kit Block Diagram..............................................................................................................5
ARTIK 053s Development Kit Interposer Board ................................................................................................................6
ARTIK 053s Module ......................................................................................................................................................6
ARTIK O53s Interposer Board Connectors..................................................................................................................6
ARTIK 053s Starter Board...................................................................................................................................................8
Starter Board Interfaces...............................................................................................................................................8
Power Interface .....................................................................................................................................................8
micro-USB Interface .............................................................................................................................................9
JTAG Interface .......................................................................................................................................................9
Pushbutton Switches .......................................................................................................................................... 10
LED Interface ........................................................................................................................................................ 11
ARTIK 053s Starter Board Connectors...................................................................................................................... 12
Arduino Connectors ........................................................................................................................................... 12
Break-out Connectors ......................................................................................................................................... 13
Starter Board to Interposer Board Interface Connectors .................................................................................. 13
Mechanical Specifications ............................................................................................................................................... 14
Starter Board Dimensions .......................................................................................................................................... 14
ARTIK 053s Interposer Board and Module Dimensions............................................................................................ 15

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
1
Figure 1. ARTIK 053s Development Kit Interposer and Starter Boards ............................................................................4
Figure 2. ARTIK 053s Development Platform System Block Diagram ..............................................................................5
Figure 3. ARTIK 053s Interposer Board Connectors.........................................................................................................6
Figure 4. Location of Power Connectors on the Starter Board ........................................................................................9
Figure 5. JTAG Connector Location on Starter Board ......................................................................................................9
Figure 6. Location of Push Button Switches on the Starter Board ................................................................................. 10
Figure 7. Location of Push Button Switches on the Starter Board .................................................................................. 11
Figure 8. Location of Starter Board Interface Connectors ............................................................................................. 12
Figure 9. ARTIK 053s Starter Board Mechanical Specifications..................................................................................... 14
Figure 10. ARTIK 053s Interposer Board and Module Mechanical Specifications......................................................... 15

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
2
VERSION HISTORY
Revision Date Description
V1.0 November 30, 2017 Initial draft of ARTIK 053s Development Kit Hardware User’s Guide.

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
3
This document describes the ARTIK 053s Development Kit.
ARTIK 053SDEVELOPMENT KIT CONTENTS
The ARTIK 053s development kit consists of the following components:
• ARTIK 053s Interposer board (contains ARTIK 053s module)
• ARTIK 053s Starter board (connected to the Interposer board at the factory)
Each of these components is described in the following subsections.
ARTIK 053SADDITIONAL DOCUMENTATION
The following documents provide additional information on the ARTIK 053s development environment.
• ARTIK 053s Data Sheet
• ARTIK 053s/055s System Design Guide
• ARTIK PCB Design Guide
• ARTIK 053s Interposer board schematics
• ARTIK 053s Starter board schematics
• ARTIK 053s Bill of Materials
ADDITIONAL MATERIALS
Depending on the system environment, the following components may be required when interfacing to the ARTIK
053s Development Platform.
• 5.0V - 12V DC, 24W power supply for connecting to the DC power jack on the Starter board.
• micro-USB cable for connecting an external host or when transferring data over the USB port.

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
4
ARTIK 053SDEVELOPMENT KIT OVERVIEW
The ARTIK 053sDevelopment kit consists of one Interposer Board and one Starter Board. The Interposer board
includes the ARTIK 053s module which is soldered to the board at the factory.
The Samsung ARTIK™ 053s Development Kit provides a development platform for the 053smodule.
For more information about the ARTIK 053s Module, see the “ARTIK 053s Datasheet”.
ARTIK 053s Main Components
Figure 1 shows the two boards that make up the ARTIK 053s Development Kit.
Figure 1. ARTIK 053s Development Kit Interposer and Starter Boards
JTAG
(CON707)
Arduino
Reset
ARTIK 053s
Reset (SW700)
Power-on
LED
Arduino Shield Intf
(CON710, CON711)
External Battery
(CON706)
Power Config
(CON705)
DC Power Jack
(CON712)
I/O Break-out
(CON703, CON704)
micro-USB
(CON700)
Arduino Shield Intf
(CON708, CON709)
LED’s
(LED702, LED703)
Test Buttons
(SW702, SW703)
ARTIK Module
Interposer Board

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
5
ARTIK 053s Development Kit Block Diagram
Figure 2 shows a system block diagram of the two boards in the ARTIK 053s development kit and the relative
location of each interface.
Figure 2. ARTIK 053s Development Platform System Block Diagram
ARTIK
Module
Interposer Board
Dbg UART4,
MicroUSB FT232
Arduino
Connectors
CON708 -
CON711
XGPIO
XPWM
XUART0
XUART1
XJTAG
XADC
XUART2
XUART3
XSPI1
XDEBUG (UART4)
XRESET
Connectors
CON703
CON704
XI2C1
Connector
CON707
SN74
XJTAG_RST
FTDI_SRST_N
5 - 12V
DC Jack
XSPI0
XEINT
XI2C1
Starter Board
USBVCC
Battery
Jumper
CON705
5-12V

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
6
ARTIK 053SDEVELOPMENT KIT INTERPOSER BOARD
This section describes the various components and interfaces on the Interposer board.
ARTIK 053s Module
The ARTIK 053s Development Kit contains the ARTIK 053s module that is soldered to the Interposer board. Table 1
shows the main features of the ARTIK 053s module.
ARTIK O53s Interposer Board Connectors
The Interposer Board is the bridge between the Starter Board and the ARTIK 053s Module. The CON400 and
CON401 connectors on the Interposer Board plug into the CON701 and CON702 connectors on the Starter Board.
The connectors are on the bottom of the Interposer board as shown in Figure 3.
Figure 3. ARTIK 053s Interposer Board Connectors
Table 1. ARTIK 053s Module Main Features
Feature Description
CPU 32-bit ARM Cortex R4 with 32 KB I-Cache and 32 KB D-Cache @ 320 MHz
DRAM 1280 KB (General Usage), 128 KB (Global IPC data)
Flash 8 MB
Secure Element AES/DES/TDES, SHA-1/SHA-2, PKA (Public Key Accelerator)
PRNG/DTRNG (Pseudo-random Number Generators), Secure Key Storage
Physically Unclonable Function (PUF)
WiFi Certified IEEE802.11™ b/g/n Wi-Fi® 2.4GHz radio served by a dedicated
32-bit ARM Cortex R4 with 32KB I-Cache and 16KB D-Cache @ 480MHz
Regulatory FCC (U.S.), IC (Canada), CE (EU), KC (Korea), SRRC (China)
Power Management 5.0V - 12V supply
Analog and Digital I/O GPIO, UART, I2C, SPI, ADC, PWM, I2S
Dimensions 15 mm x 40 mm x 3.9 mm
Interposer
(CON400)
Interposer
(CON401)

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
7
Table 2. ARTIK 053s Interposer Board CON400 Connector Pinout and ARTIK Module Pin Mapping
ARTIK Module Connector CON400 ARTIK Module
Pin Name Pin Number Pin Name Pin Number Pin Number Pin Name Pin Number Pin Name
XGPIO26 2 XGPIO26 1 2 XSPI1_CSN 74 XSPI1_CSN
XGPIO25 3 XGPIO25 3 4 XSPI1_MOSI 73 XSPI1_MOSI
XGPIO24 4 XGPIO24 5 6 XSPI1_CLK 72 XSPI1_CLK
XGPIO21 5 XGPIO21 7 8 XSPI1_MISO 71 XSPI1_MISO
XGPIO19 6 XGPIO19 9 10 GND N/A N/A
XGPIO18 7 XGPIO18 11 12 N/C N/A N/A
XGPIO17 8 XGPIO17 13 14 XGPIO3 69 XGPIO3
XGPIO14 9 XGPIO14 15 16 XGPIO1 68 XGPIO1
XGPIO13 10 XGPIO13 17 18 GND N/A N/A
XGPIO16 11 XGPIO16 19 20 XGPIO5 67 XGPIO5
XGPIO15 12 XGPIO15 21 22 XGPIO4 66 XGPIO4
XGPIO20 13 XGPIO20 23 24 XGPIO2 65 XGPIO2
N/A N/A GND 25 26 XGPIO7 64 XGPIO7
XADC0AIN_0 15 XADC0AIN_0 27 28 XGPIO8 63 XGPIO8
XADC0AIN_1 14 XADC0AIN_1 29 30 XGPIO6 62 XGPIO6
XADC0AIN_2 16 XADC0AIN_2 31 32 GND N/A N/A
XADC0AIN_3 17 XADC0AIN_3 33 34 XGPIO11 61 XGPIO11
N/A N/A GND 35 36 XGPIO9 60 XGPIO9
XGPIO23 18 XGPIO23 37 38 XGPIO10 59 XGPIO10
XGPIO22 19 XGPIO22 39 40 XGPIO12 58 XGPIO12
N/A N/A N/C 41 42 GND N/A N/A
N/A N/A N/C 43 44 XUART3_TXD 57 XUART3_TXD
N/A N/A GND 45 46 XUART3_RXD 56 XUART3_RXD
N/A N/A GND 47 48 GND N/A N/A
N/A N/A GND 49 50 GND N/A N/A
Table 3. ARTIK 053s Interposer Board CON401 Connector Pinout and ARTIK Module Pin Mapping
ARTIK Module Connector CON400 ARTIK Module
Pin Name Pin Number Pin Name Pin Number Pin Number Pin Name Pin Number Pin Name
XRESET_N 21 XRESET_N 1 2 XUART2_TXD 55 XUART2_TXD
XJTAG_TMS 22 XJTAG_TMS 3 4 XUART2_RXD 54 XUART2_RXD
XJTAG_TDI 23 XJTAG_TDI 5 6 XUART1_RXD 53 XUART1_RXD
XJTAG_TCK 24 XJTAG_TCK 7 8 XUART1_TXD 52 XUART1_TXD
XJTAG_TDO 25 XJTAG_TDO 9 10 GND N/A N/A
XJTAG_TRST_N 26 XJTAG_TRST_N 11 12 XSPI0_CLK 51 XSPI0_CLK
N/A N/A GND 13 14 XSPI0_MOSI 50 XSPI0_MOSI
XEINT0 28 XEINT0 15 16 XSPI0_CS 49 XSPI0_CSN
XEINT2 29 XEINT2 17 18 XSPI0_MISO 48 XSPI0_MISO
XEINT1 30 XEINT1 19 20 GND N/A N/A
PWR_RST 31 PWR_RST 21 22 RXD0 47 RXD0
XI2C0_SCL 33 XI2C0_SCL 23 24 TXD0 46 TXD0
XI2C0_SDA 34 XI2C0_SDA 25 26 GND N/A N/A
XI2C1_SCL 35 XI2C1_SCL 27 28 XPWM3_OUT 45 XPWMTOUT_3
XI2C1_SDA 36 XI2C1_SDA 29 30 XPWM2_OUT 44 XPWMTOUT_2
N/A N/A GND 31 32 XPWM5_OUT 43 XPWMTOUT_5
XDEBUG_TXD 37 XDEBUG_TXD 33 34 XPWM0_OUT 42 XPWMTOUT_0
XDEBUG_RXD 38 XDEBUG_RXD 35 36 XPWM1_OUT 41 XPWMTOUT_1

Samsung Semiconductor, Inc. ARTIK 053s Development Kit Hardware User’s Guide
8
ARTIK 053SSTARTER BOARD
The ARTIK 053s Development Kits includes a Starter Board which connects to the Interposer board. This section is
divided into interface types and connector types on the Starter board.
Starter Board Interfaces
This section describes the various interfaces on the Starter board.
Power Interface
Power to the ARTIK 053s Starter Kit can be sourced from the micro-USB connector, a 5 - 12V DC Jack, or a 5.6 - 6.4V
battery. Table 4 shows the jumper settings to select each of the power sources. Note that pins 1 - 2 are located
closest to the edge of the board.
N/A N/A N/C 37 38 XPWM4_OUT 40 XPWMTOUT_4
N/A N/A N/C 39 40 N/C N/A N/A
N/A N/A N/C 41 42 GND N/A N/A
EXT_5V_12V 32 DC_5V_12V 43 44 GND N/A N/A
DC_5V_12V 45 46 GND N/A N/A
DC_5V_12V 47 48 GND N/A N/A
DC_5V_12V 49 50 GND N/A N/A
Table 4. Power Configuration Jumper Settings
CON705 Power Jumper
Connections Power Source Description
1 - 2 micro-USB (CON700) Power is applied by the micro-USB connector. The pinout of the
USB connector is as follows:
Pin 1: VCC_USBP0 power
Pin 2: D-
Pin 3: D+
Pin 4: NC
Pins 5 - 11: Ground
3 - 4 DC Jack (CON712) Power is supplied by the DC power jack. The pinout of the DC jack
is as follows:
Pin 1: 5V - 12V DC power
Pin 2: Ground
Pin 3: Ground
5 - 6 2-pin header (CON706) Power is supplied by a battery connected to CON706 as shown
below. The pinout of the battery connector is as follows:
Pin 1: 5V - 12V external battery power
Pin 2: Ground
Pin 1 of the battery connector is not identified on the silkscreen but
rather by the square pad on the bottom of the Starter board. Pin 1 is
also shown in Figure 4.
Table 3. ARTIK 053s Interposer Board CON401 Connector Pinout and ARTIK Module Pin Mapping (Continued)
ARTIK Module Connector CON400 ARTIK Module
Pin Name Pin Number Pin Name Pin Number Pin Number Pin Name Pin Number Pin Name