Samsung YP-NEP32B User manual

2
-
CD-quality sound.
MP3 refers to MPEG1 LAYER3. MP3 is a music file made of
audio data compression technology with no degradation of
the original sound.
yepp’ is an advanced digital audio player which doesn't need a
cassette tape or CD. You can download MP3 files from the Internet
or PC Communications and enjoy great sound any time, any place.
What is yepp’?
What is MP3?

English
Parts Description
3
Place to insert
SmartMedia Card
Remote controller jack
Connection cable terminal
Reverse
Forward Volume control
Stop/Power Off
Power On/
Play/Pause
HOLDHOLD
Hold switch
SMC Eject
Battery case
Headphone/Earphone port
Reverse
Forward
Power On/Play/Pause
Equalizer/Repeat
Hold switch
Select repeat
Stop/Power Off
Volume control
LCD panel

4
Listening to music through yepp’
Insert batteries into the battery compartment, and then
connect the remote controller (earphone) correctly.
Turn on the Power
Press the button on the yepp player or remote
controller.
Playback
Press the button on the yepp player or the remote
controller.
NNootteeTo pause playback, press the button the mark
blinks on the remote controller display panel. Press the
button again to resume playback. Every buttons
enable the lamp on the panel to blink for 3 seconds.
Control Volume
Control volume with the volume control button (-/+) on
your yepp player or remote controller.
NNootteeVolume can be controlled from 00 to 20. Press shortly to
move up or down by 1 step. Press and hold to move
continuously.
Stop Music
Press the STOP button ( ) of your yepp player or remote
controller to stop playing back sound.
NNootteeIf the unit is in the Stop mode for more than 3 minutes it
will power off automatically.
Searching the MP3 files at a faster speed
Press the and buttons too move to the next track.
To search within a song being played back
Press and hold the FF button ( ) while a song is being
played back to fast forward. Release the button to
resume playback.
NNootteePress and hold the REW ( ) button while a song is
being played back to move quickly backward.
To skip to the next song while another song is being
played back
Press the FF button to move one track forward.
To search a song in stop mode
1Press the FF button to move one track forward. To
play back the song that you chose, press the PLAY
button ( ).
2Press the REW button to move one track backward.
NNootteeIf the REW button is pressed before the first 5 seconds of
the track has played, the previous song will be repeated.
If the REW button is pressed after 5 seconds has played,
the current song will be repeated.

English
5
Hold Function
While the Hold switch on your yepp player is on
Buttons on the yepp won't work. Each time a button is
pressed, “Hold” will appear for a short time on the display
only the buttons on your remote controller will work.
While the Hold switch on your remote controller is on
The mark will appear on the display panel. None of
the buttons on your remote control will work. The buttons
on your yepp will work.
Repeating Tracks/Section
Press the “A ↔ B”button of your remote controller to
repeat the track or section that you selected. Setting 'Repeat
Track' needs a minimum of two seconds of play time.
1Press the A↔Bbutton of your remote control at the
start point of the track or section that you want to
repeat. Then, 'B' blinks on the display panel.
2Press this button again at the end point of the track or
section that you want to repeat.
NNootteeThe section from point A to point B that you selected will
automatically be repeated. To cancel this function, press
the A↔B button again. While tracks/sections are
repeated, the FF and REW buttons do not work.
Setting the Modes
Each time the EQ/REP button of your remote controller is
pressed and held, the modes will change in the order of
REP, ALL, SHU and INT.
◆REP mode : Repeats current track.
◆ALL mode : Repeats all the tracks.
◆SHU mode : Enables random playback.
◆INT mode : Enables you to repeat the first 10
seconds of the tracks saved (for 10
seconds each).
Using the Equalizer
Each time the EQ/REP button of your remote controller is
pressed, the equalizer modes will be changed in the
order of Classic, Jazz, Rock and Normal.
Normal mode is not indicated on the display.

6
Connecting yepp’to PC or Mac
1Connect the USB cable to the USB port of the computer.
2Turn the player on and connect the other end of the cable
to the download connector.
(YP-NEU)
(YP-NEP)
NNoottee
Be sure to install the yepp’Explorer before
connecting your yepp’to PC or Mac.
When the message “Add new hardware
wizard”appears on the screen, click
[Cancel] and then install the yepp’explorer.

7
English
Installing Software on PC
Insert the Installation CD into the CD-ROM drive.
The picture below appears when inserting the CD.
1Click
Click
2Click the next button on each successive window.
yepp’explorer
1Click
Click
2Click the next button on each successive window.
NNootteeInstall the other program or download the files
depending on your requirement.
RealJukebox
This software lets you listen to MP3 music on your
computer and enables you to encode your CDs into
MP3 Files.

8
Installing Software on PC (Windows 2000)
If USB port error occurs after installing the yepp’explorer
in Windows 2000, do the following steps 1~3.
1Copy the secypusb. sys file from the installation CD.
2Paste the secypusb. sys into 'Drivers' from the
system32 folder in Windows 2000 (System Root
Directory). (ex:/WinNT/system32/Drivers)
NNootteeEven though the secypub. sys file is present in the
existing folder, be sure to run Change File.
3Re-boot the computer.
Installing Software on Mac
Insert the Installation CD into the CD-ROM drive.
1Execute the yepp’explorer.
- Double-click the yepp’explorer icon.
2Click the button on each successive window.
- After all installations are complete, the yepp’
explorer folder is created.
Formatting flash memory (continued...)
yepp’explorer
1Execute the yepp’explorer.
- Double-click the icon of the yepp’explorer on the
desktop.
2Click [File], [Format] and select [Flash Memory].
NNoottee
- Before formatting the flash memory or the SmartMedia Card,
connect your yepp’to PC and click Refresh icon on the yepp’
explorer.
- If the optional SmartMedia Card is installed in the yepp’, file(s)
can also be saved to the card by clicking Copy to and selecting
Smart Media Card.
- You can also format the flash memory or the SmartMedia Card
by pressing the right button on the mouse and selecting
Format.
- Formatting Flash memory (or Smart Media Card) will delete all
existing files.
RealJukebox
1Connect your yepp’to PC and execute the RealJukebox.
2Click/Double-Click through the following items.
Devices -->Samsung Ne....
3Click Configure icon and Select Format_Flash_
Card/Format_Internal_Memory.

9
English
Formatting flash memory
NNoottee
- Before formatting the flash(SmartMedia) Card or the Internal
(flash) memory, press F5 Key to refresh. (Or click
View↔Refresh in the Main menu)
- Formatting Flash memory(or Smart Media Card) will delete all
existing files.
Mac
1 Execute the yepp’explorer.
- Double-click the yepp´explorer icon in the HDD.
2Click [File], [Format] and select [Flash Memory].
NNoottee
- Before formatting the flash memory or the SmartMedia Card,
connect your yepp´to PC and click Refresh icon on the yepp´
explorer.
- If the optional SmartMedia Card is installed in the yepp´, file(s)
can also be saved to the card by clicking [Copy to] and
selecting SmartMedia Card.
- Formatting Flash memory (or Smart Media Card) will delete all
existing files.
Options (continued...)
yepp’explorer
- Auto
The device has been initially set "Auto".
- ECP & USB
When the communication is not smooth in Auto, Select ECP
when using a parallel cable (YP-NEP) and USB when using an
USB cable (YP-NEU).
- Bidirection
For YP-NEP, if the communication Between your yepp' and PC
doesn't go smoothly, select the Bidirection mode.
- Select only for using YP-D40.

10
Options
RealJukebox (Installation of the USB driver)
1After installing RealJukebox, connect the yepp to the
PC.
2Execute RealJukebox.
3Click on Devices icon on RealJukebox screen.
4Select Install Device.
5Follow the on-screen instructions for RealJukebox.
Sending files to yepp’(continued...)
Before sending files to your yepp’, connect the yepp’to
PC and execute the RealJukebox.
yepp’explorer (YP-NEP/NEU)
1Turn on the yepp’by pressing .
2Execute the yepp’explorer.
- Double-click the icon of the yepp’explorer on the
desktop.
3Click the Refresh icon on the yepp’explorer.
4Click [Copy to] and [Flash Memory] or [SmartMedia
Card].
5Select the file you would like to send to your yepp’.
6Click [Open].
- The selected file has been saved. Now you can
listen to music with yepp’after removing the
parallel cable.
NNootteeThe yepp’uses around 1MB of memory for each minute of
music.

11
Sending files to yepp’(continued...)
RealJukebox (YP-NEU)
1Connect the yepp’to your PC.
2Turn on the yepp’by pressing .
3Execute RealJukebox.
- Double-click the RealJukebox icon on the desktop.
4Click/Double-Click through the following items.
Devices---> Samsung Ne....
5Press F5 Key to refresh.
6Click Internal Yepp.../Smart Media...
7Drag your selected file from your folder and drop into
Yepp.../Smart Media... window.
8Click the Begin Transfer icon, at the left side of the
RealJukebox window.
Sending files to yepp’(continued...)
Mac (YP-NEU)
1Connect the yepp’to your Mac.
2Turn on the yepp’by pressing .
3Execute the yepp’explorer.
- Double-click the yepp’explorer icon in the HDD.
4Click the [File] [Refresh] on the yepp’explorer.
5Click [Copy to] and [Flash Memory] or [SmartMedia
Card].
6Select the file you would like to send to your yepp’.
7Click [Open].
- The selected file has been saved. Now you can
listen to music with yepp’after removing the USB
cable.
English