Samsung yepp YP-53 User manual

Location of Controls
Playing Music
Stopping Music
When you press the √/❙❙ button, the yepp logo appears and a music/voice file is played.
When you press the √/❙❙ button while playing, the music stops. If no buttons are pressed within 10
seconds (changes depending on settings), the yepp automatically powers off.
●
You can also turn off the power by pressing and holding the √/❙❙ button.
14
YP-53 Quick Guide
AH68-XXXXXA (Rev 0.0)
Disconnecting the USB cable
1Double-click on the green arrow in the taskbar on the bottom right of the
window.
2Select the USB device, and then press the [Stop] button. When the
[Stop a Hardware device] message appears, press the [OK] button
and disconnect the USB cable.
After completing file transmission, you must disconnect the cable in the following way:
➡
➡
➡
USB Plug
USB Plug Cap
Battery Cover
Earphone Jack
Neck strap Hook
Display
MENU, Navigation Button / Move to Track /
Speed Search / Volume Button
Play / Pause Button
Voice Recording / ENC Switch
Hold Switch
LINE IN Jack Loop Repeating Button
Quick-53-Eng 9/7/04 5:33 PM Page 2

Downloading/Uploading files
1Connect the player to your PC.
2Open Windows Explorer on PC.
● Removable Disk is displayed in Windows Explorer.
3Select the file you want to save, then drag and drop it to the removable
disk. The saved files will be played in the order of file name as they
appear. To change the order, change the name of file.
● If you change the music file name to 001✽✽✽, 002✽✽✽... in the Windows
Explorer, the music files will be played in the order of number.
NN
NNoo oott ttii iicc ccee ee :: ::
●“READING/WRITING” message will be displayed during file download or upload file. If you
disconnect the USB cable while “READING/WRITING” is played, the main unit may not work
properly.
●The order of music files is not relative to the replay order when you select a Removable Disk in
Windows Explorer.
2 3
Connecting the USB cable
1Connect a USB cable to the USB port on the computer.
2Connect the USB plug of the player to the opposite side of USB cable.
You can directly connect the USB plug to the USB port of PC.
● If you disconnect the USB cable from your PC while implementing a command or initializing during USB
driver installation, your PC may not function correctly.
3The USB driver is installed with a message saying that it is searching for a new
device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully
completed.
4
When the USB driver is installed, "Samsung yepp YP-53 USB Device" will
appear in the [Device Manager].
➤Before connecting yepp to PC, make sure to install USB driver.
USB connect cable
Quick-53-Eng 9/7/04 5:33 PM Page 4