Samsung SIR-4150 Series User manual

Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
ENGLISH
High Resolution Day & Night IR Camera SIR-4150 User’s Manual

Before operating the camera, confirm the camera model and proper input power voltage. In order to
that you can understand this manual thoroughly, we'll introduce our model description.
n SIR-4150 SERIES
 •NTSCMODELS •PALMODELS
  SIR-4150N SIR-4150P
nMODEL DESCRIPTION
 •SIR-4150X
_
 •SIGNALSYSTEM
  N-->NTSCMODEL
  P-->PALMODEL
SIGNALSYSTEM
This installation should be made by a qualified service person and
should conform to all local codes.
Thelightningflashwithanarrowheadsymbol,withinanequilateraltriangleis
intended to alert the user to the presence of uninsulated “dangerous voltage”
withintheproduct'senclosurethatmaybeofsufficientmagnitudetoconstitute
a risk of electric shock to persons.
Theexclamationpointwithinanequilateraltriangleisintendedtoalerttheuser
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user ’ s authority to operate the equipment.
WARNING - To prevent electric shock and risk of fire hazards:
◆Do NOT use power sources other than that specified.
◆Do NOT expose this appliance to rain or moisture.

COLOR CCD CAMERA User’s Manual
4
COLOR CCD CAMERA User’s Manual
5
Contents
Contents
• Features ………………………………………………………………………… 5
• Warnings & cautions ………………………………………………………… 6
• Components and Accessories …………………………………………… 9
• Overview ………………………………………………………………………… 9
nFront
 

nBottom
 

nBack
 
• Adjust to lens ………………………………………………………………… 12
nAjusttoLens’sZOOMandFocus
  
• Connection ……………………………………………………………………… 13
nConnectingtoamonitor
  

nConnectingtopower
 

nRS-485Communicationcontrol
 
• Operating Your Camera …………………………………………………… 16
nMenu
 

nSettings
  
  •LENS(Adjustingtothebrightnesslevel)  
 •SHUTTER(conditionandspeedcontrol)  
 •WHITEBALANCEcontrol   
 •BACKLIGHT(BacklightCompensation)  
 •AGC(AutoGainControl)  
 •SSNR(SamsungSuperNoiseReduction)   
 •SENSUP(Lowilluminance)  
 •SPECIAL   
 •EXIT  
• Troubleshooting ……………………………………………………………… 32
• Specifications ………………………………………………………………… 33
Features
DAY&NIGHT(ICR)
Thiscamerahasafunction thatautomaticallyselectsthe
modethatisappropriatefordaytimeornight-time
conditions.
TheCOLORmodeoperatesindaytimeconditionsto
provideoptimumcolors,andBWmodeoperatesinnight-
time conditions to enhance the definition of the image.
Outdoor Visibility range 30M
TheIRLEDs of theSIR-4150automatically illuminates
viewingareaintheextremedarknessallowingthe
cameraalong-rangevisibilityofupto30meters.
IRMODE Function
This function that prevent short distance saturation in
caseofIRLEDislighted,discriminationofthesubjectis
possiblewithinashortdistance.
RS-485 Function
UseRS485communicationandOSDmenucontroldoes
possibilitytoremote.
IP65 Approved/Dust and Rain
Resistant
Withdustandrainresistantdesign,the cameracanbe
installedoutsideunderbuilding eavesor placesthat
areexposedtothedustandrain.
PRIVACY Masking Function
ThePRIVACYmaskingfunctionconcealstheareasyou
do not wish to appear on the screen.
Additional Function
SENS-UP,MIRROR,SHARPNESS,MOTIONDET.functions
arealsoavailable.
High Resolution
Featuring520TVlinehorizontalresolutionincolormode
and 570TV line horizontal resolution in BW mode.The
camerafeaturesSony’s410,000pixelCCDandcapture
clean,noiselesshigh-qualityimage
SSNR (Samsung Super Noise
Reduction)
Byusingbuilt-inSSNRChipmanufacturedby
SAMSUNGTECHWIN,theamountoflow illuminance
noisehasbeensignificantlyreduced,andthesignal-to-
noise ratio (S/N) as well as horizontal resolution have
beenimproved, resultingin aclear andsharpimage
display even in the dark.
Ultra High Sensitivity
Thebuilt-inhighsensitivityCOLORCCDenablesaclear
imageevenin0Lux(B/W,IR-LEDON)orlower
illumination.

COLOR CCD CAMERA User’s Manual
6
COLOR CCD CAMERA User’s Manual
7
Thisinformationisprovidedtoensureyoursafetyandtopreventanylosses,financialor
otherwise.Pleasereaditcarefullyandusetheproductaccordingly.
*For product inquiries, please contact the retail shop where you bought the camera.The use of
equipmentsuchasanaerialladderwhileprovidingafter-salesserviceshallbeatyourexpense.
Ignoring this information may result in
deathororseriouspersonalinjuries.
Indicates"NeverAllowed."
Ignoring this information may result in
materiallossorpersonalinjuries.
Indicates "NoDisassembling."
SamsungTechwincaresfortheenvironmentatallproductmanufacturingstagestopreservethe
environment,andistakinganumberofstepstoprovidecustomerswithmoreenvironment-friendly
products.TheEco markrepresentsSamsungTechwin'swilltocreate environment-friendly
products,andindicatesthattheproductsatisfiestheEURoHSDirective.
Warnings & Cautions
Warning/Attention/Special Mark Messages
Precautions
Do not install under extreme
temperature conditions.
Use only under temperature conditions
between -10°C and +50°C. Provide
good ventilation when using in high
temperature conditions.
Do not install in high humidity
environment.
May lower image quality.
Do not install under unstable
lighting conditions.
Severe lighting changes or flickering may
hinder normal camera operation.
Avoid touching the camera lens.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Notes
•Please make sure the product is installed appropriate places where secured from
flood, such as under the eaves, to operate properly.
•ThisproductiscertifiedasIP65standard.However,ifthereisanyfloodconcerns,itis
highlyrecommendedtouseanoutdoorHousingWhenyouinstallthecamerainside
anoutdoorHousing,pleaseuseoneofthefollowingmethods:
 1.RemovethefrontglassofHousingbeforeinstallingthecamera.
 2.TokeepthefrontglassofHousing,removethefrontcover,andthenputthecamera
close to the front glass.

COLOR CCD CAMERA User’s Manual
8
COLOR CCD CAMERA User’s Manual
9
❶
34
2
5
Do not drop the camera or
subject it to physical shock.
May cause a product malfunction.
Never keep the camera face to
strong light directly.
May damage the CCD.
Do not expose the camera to
radioactivity.
Radioactivity exposure may damage the
CCD.
•Exposuretoaspotlightoranobjectemittingstronglightmaycausesmearor
blooming.
•Ensurethatthepowersource complieswithnormalspecificationsbefore
supplying it to the camera.
•IncaseofIRLEDhasbeenlighted,donotlightendirectlyeye.
Notes
Precautions
Overview
Components and Accessories
6
3 4❶
5
2
FRONT
❶Hood
2Hood adaptor
Fixing the hood onto the camera
3Focus lever
Set focus of lens by turn the focus lever
4Zoom lever
Set zoom magnification of lens by turn the zoom lever
5Front cover fixing screw
❶
SIR-4150 2 CAMERAHOOD
3
HOODADAPTOR(2EA)
4
USER’SMANUAL
5
DC12V/4AADAPTOR 6 POWERCABLE

COLOR CCD CAMERA User’s Manual
10
COLOR CCD CAMERA User’s Manual
11
•Adjusttothezoom&focuslever,and thenuseafterfixateturningleverto
clockwise.
•When you adjust to the ZOOM&FOCUS of the lens,PleaseloosentheFrontcover
fixingscrewandseparateFrontcoverfromthecamera.
•This camera package does not include the mounting bracket. Please refer to the
user'smanualforinstallationofthemountingbracket.
Notes Notes
6
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA
standard)
BOTTOM
6Mounting bracket screw hole
Please use the screw hole when fixing the
camera onto the mounting bracket.
Please use the clamp screw as specified below.
*The mounting bracket can be separated and attached to
the top of the camera.
In this instance please do not tighten the screw to a
depth of more than 4mm, otherwise serious damage can
occur to the inside of the camera.
8
9
7
BACK
7Power input terminal
8Video output terminal
9RS-485 control terminal
Overview

COLOR CCD CAMERA User’s Manual
12
COLOR CCD CAMERA User’s Manual
13
Adjust to Lens
Adjust to the lens's zoom and focus.
1. Please loosen a front cover fixing screw with picture and separate cover
2. Please unlock the Zoom or Focus lever to release it.
3. Adjust the zoom or focus lever by moving it to WIDE(NEAR)or TELE(FAR) position.
4. After adjustment, tighten the zoom or focus lever, taking care that the adjusted
position does not change.
5. Please close cover and tighten the front cover fixing screw.
Frontcoverfixingscrew Focus lever
ZOOMlever
•Iffrontcoverfixingscrewdonotpinch,itisnotwaterproof.
Notes
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the
monitor.
CCDCamera
CCDCamera
Intermediate Endmonitor
Monitor
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and
select 75Ω for the Intermediate device as shown in the picture below.
Connection

COLOR CCD CAMERA User’s Manual
14
COLOR CCD CAMERA User’s Manual
15
Connection
The recommended adaptor specification for SIR-4150N/P is DC 12V/4A.
Please check the standard power requirement before connecting to power.
Connecting to Power
Whentheresistancevalueofcopperwireisat[20°C(68°F)]
Copperwiresize(AWG) #24(0.22mm2)#22(0.33mm2)#20(0.52mm2)#18(0.83mm2)
Resistancevalue(Ω/m) 0.078 0.050 0.030 0.018
Voltagedrop(V/m) 0.028 0.018 0.011 0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
✽ Standardvoltageforcameraoperation:DC12V±10%
✽ Theremaybesomedeviationinvoltagedropdependingonthetypeofwireandthemanufacturer.
•Pleasemustbeusedadaptorthatmeetsthestandardrequirement.
•Pleaseconnectthepowerafterinstallation.
Notes
•Whenyouconstructexternal control systems foracameracontrol,pleaseuseto
thePELCO-DPROTOCOL.
•WhenyouconnectingtoRS-485CONTROLTERMINAL,pleasepeelofftheouterskin
insidetheRS-485CONTROLTERMINAL.
Notes
Connecting to RS-485 CONTROL TERMINAL
CONTROL TERMINAL SPEC
WHITE (TRX+) RS-485+
BLACK (TRX-) RS-485-
Using a RS-485 communication, it will be able to control the OSD menu at the
SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 CONTROL TERMINAL outside
camera and serial cable
EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE -- RS-485 CONVERTER
-- RS-485 CONTROL TERMINAL
(2) The case which it controls from the DVR or System Controller
It connects the RS-485 CONTROL TERMINAL in the connection terminal of 485
control boards which are connected with the DVR or System Controller.
485CONTROLBOARDCONNECTIONTERMINAL RS-485CONTROLTERMINAL
(+)CONNECTIONTERMINAL WHITE(TRX+)
(-)CONNECTIONTERMINAL BLACK(TRX-)
RS-485 communication control

COLOR CCD CAMERA User’s Manual
16
COLOR CCD CAMERA User’s Manual
17
SETUP menu
LENS

SHUTTER
(condition and speed control)
   
WHITE BALANCE control
  
BACKLIGHT
(Backlight compensation)
  

AGC (Auto Gain control)
  
SSNR
(Samsung super noise reduction)
  

SENS-UP (Low illuminance)
 
SPECIAL
 
 
 
 

EXIT
Operating Your Camera
Menu
Settings
Settings can be made using the RS-485 communication.
Please refer 14 pages (RS-485 communication control) and connect to the RS-485
control terminal(TRX+, TRX-)
1. When use SCC-3100A PELCO-D Protocol setting method
< SETUP SYSTEM MENU >
1 PTZ selection : PTZ SETUP2 selection 1)MODEL:PTZ ID, PELCO-D Protocol
selection.
2 CONTROLLER selection : SERIAL selection 1. BAUD, 2. DATA, 3. STOP BIT, 4.
PARITY setting
✽ OSDbutton:DisplayOSDmenuonthemonitororthereisasub-menuwhichcanbeselectedby
pressingOSDbutton.
✽ JOYSTICK:Itcanmovemenucursorbyupside,downward,theleftsideandtherightside.Joystick
doUp/Down/Right/Leftbuttonfunctionsaccordingto4directionsthatmove.
OSDSETUPBUTTON
RIGHTBUTTON
DOWNBUTTON
UPBUTTONLEFTBUTTON
•WhenyouuseSCC-101,youcanadjustthemenuswithoutchangingsettings.For
moreinformationabouthowtosetupconnection,pleaserefertoSCC-101manual.
Notes
1. Please press the SETUP button.
• Settings can now be made. The SETUP menu is displayed on the monitor.
2. Please select any function you wish to activate by using the UP and DOWN
buttons.
• The arrow can be moved up or down by using the UP and DOWN buttons
Please position the arrow to point to the function you wish to operate.
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT

COLOR CCD CAMERA User’s Manual
18
COLOR CCD CAMERA User’s Manual
19
Operating Your Camera
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
Selectanyfunctionyou
wishtooperateby
usingtheUPandDOWN
buttons.
Modescanbechanged
usingtheLEFTand
RIGHTbuttons.
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode
you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
3. Please press the SETUP button if you wish to
return to the previous menu.
•  I f  appearsatthemodeyouwishtooperate,itmeansthatthereisasub-menu
whichcanbeselectedbypressingtheSETUPbutton.
•If---appearsatthemodeitem,it means that thereisnomodeavailabletobe
selected.
Notes
LENS (Adjusting to the brightness level)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to
point to 'LENS' by using the UP and DOWN buttons.
2. Using the SETUP button, you can control the brightness of the screen.
Because SIR-4150 uses built-in dc lens, shutter speed is fixed at 1/60 basically.
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
9.EXIT
SHUTTER (condition and speed control)
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW

- - - - : Shutter speed is fixed at 1/60(1/50)

FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency.
NTSC Model : 1/100, PAL MODEL : 1/120

COLOR CCD CAMERA User’s Manual
20
COLOR CCD CAMERA User’s Manual
21
WHITE BALANCE control
Operating Your Camera
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by using
the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
When there is a strong backlight behind the object, clear images of the background
as well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using
the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
Please select one of the 3 modes below.
ATW(Auto Tracking White Balance) :
This mode can be used within the color temperature range 1,800°K ~ 10,500°K
(Ex. fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
AWC(Auto White Balance Control) :
Please press the SETUP button while the camera is directed at a piece of white paper
to obtain the optimum state under current illumination. If the environment including
the light source is changed, you have to adjust the white balance again.
MANUAL :
The manual adjustment mode enables finer adjustment. Please select ATW or AWC
first. Please change to manual adjustment mode and press the SETUP button. Please
set the appropriate color temperature, and then increase or decrease the red and blue
color values while monitoring the color changes on the object.
HIGH/MIDDLE/LOW :
You can adjust the sensitivity of BLC and BLC window’s
size and position. So that, It can achieve BLC function
efficiently regardless of position of subject.
OFF :
BLC function doesn’t operate.
•Under thefollowingconditionstheWHITEBALANCEfunctionmay notoperate
properly.Insuchcases,pleaseselecttheAWCmode.
 1.Whentheobject’ssurroundingshaveaveryhighcolortemperature.
(Ex.aclearskyandsunset)
 2.Whentheobject’ssurroundingsaredark.
 3.Ifthecameradirectlyfacesafluorescentlightorisinstalledinaplacewhere
there areconsiderablechangesinillumination,theWHITEBALANCEfunctionmay
become unstable.
Notes
BACKLIGHT (Backlight Compensation)
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
 
•WhenBWmodeatnight-time,BLCdoesnotoperate.
Notes

COLOR CCD CAMERA User’s Manual
22
COLOR CCD CAMERA User’s Manual
23
Operating Your Camera
AGC (Auto Gain Control)
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the UP
and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
As the level of gain increases, the screen gets brighter and the level of noise also
increases.
HIGH :
The gain increases or decreases within the range of 6dB ~ 34dB.
NORMAL :
The gain increases or decreases within the range of 6dB ~ 30dB.
OFF :
The gain is fixed at 6dB.
SENS UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
AUTO :
Low light level auto mode
OFF :
The function does not operate.
OFF :
There is no reduction in noise level.
LOW :
There is a small reduction in noise level with almost no ghost image.
MIDDLE :
The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost image.
HIGH :
The level of noise is reduced greatly, however there is an increase in
ghost image.
3. Please press the SETUP button. The BRIGHTNESS
can be adjusted within the range of 1~70.
4. Please press the SETUP button when all the
settings are complete.
SSNR (Samsung Super Noise reduction)
The background noise in the low light level decreases automatically as the level
of gain changes.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP
and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
•WhenAGCisturnedoff,SSNRdoesnotoperate.
Notes
SENS UP (Low illuminance)

COLOR CCD CAMERA User’s Manual
24
COLOR CCD CAMERA User’s Manual
25
Operating Your Camera
SETUP
1.LENS DC
2.SHUTTER - - -
3.WHITE BAL. ATW
4.BACKLIGHT OFF
5.AGC NORMAL
6.SSNR LOW
7.SENS-UP OFF
8.SPECIAL
3. Please press the SETUP button when all the settings are complete.
1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the UP or DOWN button.
•Themaximumstoragemagnificationinlowlightlevelcanbeadjustedbypressing
theSETUPbuttonin'AUTO'mode.(X2~X128)
•Asthemagnificationincreases,thescreengetsbrighter;movingobjectgetsmore
afterimage.
•Ifstoragemagnificationisincreased whileSENSUPisoperating, it maycause
noise,andspotsmayappear;howeverthisisnormal.
Notes
•If'OFF'isselected,theIDdoesnotappearonthe
monitorevenifithasbeeninput.
Notes
SPECIAL
SPECIAL
10.CAMERA ID OFF
11.DAYNIGHT A U T O
12.MOTION DET OFF
13.PRIVACY OFF
14.COMM ADJ
15.IMAGE ADJ
16.IR MODE ON
17.RESET
18.RETURN
•WhenSHUTTERisinthemanualmode,SENSUPdoesnotoperate.
•WhenAGCisturnedoff,SENSUPdoesnotoperate.
Notes
CAMERA ID :
If the ID is input, the camera ID appears on the monitor.
1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN
button.
2) Please select 'ON' by pressing the LEFT or RIGHT button.
SPECIAL
10.CAMERA ID OFF
11.DAYNIGHT A U T O
12.MOTION DET OFF
13.PRIVACY OFF
14.COMM ADJ
15.IMAGE ADJ
16.IR MODE ON
17.RESET
18.RETURN

COLOR CCD CAMERA User’s Manual
26
COLOR CCD CAMERA User’s Manual
27
3) Please press the SETUP button.
Operating Your Camera
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-. 123456789
CLR POS END
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-. 123456789
CLR POS END
4) Up to 15 letters can be used for the ID.
  
Please move the cursor to the letter you wish to choose by using the UP
and DOWN button.
5) When a name has been chosen, please select a position for the name display.
  
Please move the cursor onto 'POS' and then press the SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
  
The name will appear at the top left hand
corner.
  
Please find the position you wish to
display the name by using the 4
directional buttons, and then press the
SETUP button.
  
Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the UP, DOWN, LEFT
and RIGHT buttons.
  
Please lock in the letters by using the SETUP button.
• When the letter is locked in, the cursor moves to the next space.

Please repeat the above to input the ID.
•Ifthewrongnamehasbeeninput.....
 IfyoupresstheSETUPbuttonaftermovingthecursortoCLR,alltheletterswillbe
erased. If you want to correct a letter, please move the cursor to the arrow at the
bottomleftofthescreenandpress'SET'.
 Pleasepositionthecursorabovetheletteryouwishtocorrect,andthenmovethe
cursorontotheletteryouwishtochooseandpresstheSETUPbutton.
Notes
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-. 123456789
←→CLR POS END
FRONT DOOR
FRONT DOOR
DAY&NIGHT (ICR TYPE) :
Select from COLOR, B/W or AUTO modes.
• AUTO : According to the input luminance level, IR Cut Filter is automatically
switched to the appropriate mode for daytime or night-time. The COLOR
mode is operated for daytime, and it converts to BW mode for night-time

COLOR CCD CAMERA User’s Manual
28
COLOR CCD CAMERA User’s Manual
29
Operating Your Camera
• COLOR : COLOR mode
• B/W : BW mode. Please press SETUP button to turn on or off the burst signal
on BW mode.
•IfAGCisOFF,youcan'tselectAUTOmodeandB/Wmode.
 WhenDayNightmodeissettoAutoundertheconditionwhichthestrongIRlightis
flickeringperiodically,amalfunctionofIR-Cutfiltermayoccur.
Notes
MOTION DETECTION :
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct supervision
efficiently. The camera detects an object's movement by sensing disparity of outline,
and level of brightness and color.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
• Please select the area you wish to observe from
the 3 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be observed
by using the UP, DOWN, LEFT or RIGHT button.
• Please press the SETUP button to save the
changes and complete the setting.
PRIVACY :
Mask privacy area you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• Please select the area you do not wish to
appear from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be
concealed by using the UP, DOWN, LEFT or
RIGHT button.
IMAGE ADJ :
Includes image quality or special function factors.
• MIRROR : Sets a horizontal image inversion.
COM ADJ :
When wish to control CAMERA by
external communication control device,
it is function that set up CAMERA's
communication states and protocol.
• CAM ID : Assign ID number to the camera. It is
restricted available to set ID from
1~255
• DISP CAMID : Displays CAM ID on the top left of the screen.
• BAUD RATE : Configure baud rate from 9600bps, 19200bps, 38400bps,
57600bps.
• UART MODE: Configure parity bit to NONE,EVEN, or ODD. Data bit is set to 8bit
and stop bit to 1bit.
• END
•Thereisno‘MD’outputsignal.‘MD’isonscreendisplayonlywords.
Notes
•PleasesetCAMIDofCAMERAandexternalcommunicationcontroldeviceequally.
Notes

COLOR CCD CAMERA User’s Manual
30
COLOR CCD CAMERA User’s Manual
31
MIRROR OFF MIRROR ON
Operating Your Camera
• SHARPNESS : The outline of the video image becomes
cleaner and more distinctive as the level
of SHARPNESS increases. If the level
goes up excessively, however, it may
affect the video image and generate
noise.
•IRMODEfunctiondoesnotworkinD&NCOLORmode.
•WhenIRMODElevelissettoLOW,saturationatashortdistancedecreaseswhilevideo
imagebecomesdarker.
Notes
IR MODE :
When IR LED is turned on in B/W, the objects
can be clearly identified due to the function
that decreases screen saturation of objects
within a short distance.
- OFF : disabled
Used to view clearly in dark environments such
as warehouse and outer area.
- ON : IR MODE enabled
· TOP/DOWN/LEFT/RIGHT: Adjust the range according to the location of objects.
· LEVEL: Select LOW when objects appears within a short distance or select HIGH
when objects appears within a long distance on the screen.
IR MODE
▶ TOP 210
DOWN 400
LEFT 255
RIGHT 510
LEVEL HIGH
Press SET to Return
||||||||||||||||||||||||||
||||||||||||||||||||||||||
||||||||||||||||||||||||||
||||||||||||||||||||||||||
RESET :
Returns to the level which was set by the manufacturer for shipment.
RETURN :
Returns to the SETUP menu.
Saves all the setting menus and then exits.
EXIT

COLOR CCD CAMERA User’s Manual
32
COLOR CCD CAMERA User’s Manual
33
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
●
Nothing appears on the screen.
▶ Please check the power connection.
▶ Please check the video signal line connection.
●
The video image is not clear.
▶ Please check if the lens is clean. Please clean the lens with a clean cloth or brush.
▶ Please adjust the contrast feature of the monitor.
▶ Please make sure that the screen is not exposed directly to a bright light. Please move the camera if necessary.
● The screen is dark.
▶ Please adjust the contrast feature of the monitor.
▶ If you have an intermediate device, set the 75Ω/ Hi-z properly, and check the terminals.
● There is a problem with the camera operation.The camera surface is too hot and black stripes
appear on the screen.
▶ Please check if an appropriate power source to the camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
● Color are not quite right
▶ Please check the ‘WHITE BAL’ setting
● DAY&NIGHT(AUTO, B/W) mode doesn’t Operate.
▶ Please check if the AGC menu is set to the OFF position.
● SENS-UP function doesn’t operate.
▶ Please check if the AGC menu is set to the OFF position.
● IR-LED isn’t lighted.
▶ Isn’t DAYNIGHT function setting up the color mode?
▶ Please change the AUTO or B/W mode.
● OSD control doesn’t operate.
▶ Please confirm whether communication setting method and RS485 control terminal connection fit.
Troubleshooting
SIR-4150N SIR-4150P
POWER DC12V±10%, 460mA/ 5 .5W(LED ON)
CCD
Sensor 1/3 inch, Sony Super HAD CCD
Total Pixels 811(H) x 508(V) 795(H) x 596(V)
Effective Pixels 768(H) x 494(V) 752(H) x 582(V)
Sync
Scanning System 2:1 Interlace
Synchronization Internal Fixed
Frequancy H:15.734 KHz, V :59.94 Hz H: 15.625 KHz,V: 50.00 Hz
E
L
E
C
T
R
I
C
A
L
Resolution 520 Lines(Color) / 570 Lines(B/W)
Video Output CVBS : 1.0Vp-p/75Ω
S/N (Y signal) 50 dB (AGC Off/Weight ON)
Min. LED ON 0 Lux
Illumination LED OFF 0.3 Lux(Color), 0.002(Sens-up)/ @F1.2
Visibility Range
(IR LED ON)
Indoor - Outdoor : 30m (IR LED number: 24EA)
Dust/Rain Resistance IP65
Day & Night(ICR) AUTO/ COLOR / B/W
Gain Control NORMAL/HIGH/OFF Selectable
White Balance ATW(1800°K ~ 10,500°K)/AWC/Manual
Electronic shutter speed 1/60 Fixed / Flickerless 1/50 Fixed / Flickerless
Back Light Compensation LOW/MIDDLE/HIGH/OFF Selectable
SSNR LOW/MIDDLE/HIGH/OFF Selectable
Sens-Up AUTO/OFF (selectable limit X2 _X128)
O.S.D RS485 Control
Camera Title OFF/ON (Displayed 15 characters)
Camera ID 255 ID Selectable
Motion Detection ON/OFF (4 Programmable Zones)
Communication
RS-485(9600, 19200, 38400 and 57600bps is selectable)
Pelco-D Protocol is available
Mirror ON/OFF
Privacy ON/OFF (4 Programmable Zones)
Sharpness ON/OFF (Level Adjustable)
LENS X2.5 Vari-Focal Lens (F1.2, f= 3.8mm ~ 9.5 mm)
Operating
Temperature/Humidity
-10°C to +50°C / 30% to 80%
Dimension 74(W) x 74(H) x 134.5(D)mm
Weight 585g
Specifications

COLOR CCD CAMERA User’s Manual
34
COLOR CCD CAMERA User’s Manual
35
DECLARATION OF CONFORMITY
ApplicationofCouncilDirective(s) 89/336/EEC
Manufacturer'sName SAMSUNGTECHWINCO.,LTD
Manufacturer'sAddress SAMSUNGTECHWINCO.,LTD
  42,SUNGJU-DONGCHANGWON-CITY,
  KYUNGNAM,KOREA,641-120
EuropeanRepresentativeName
EuropeanRepresentativeAddress
EquipmentType/Environment CCTVCamera
ModelName SIR-4150P
BeginningSerialNO. S8090001
YearofManufacture 2008.09.01
Conformanceto EN50081-1:1992
  EMC-Directive89/336EECand92/31/EEC
  EN50130-4:1996
We,theundersigned,herebydeclarethattheequipmentspecifiedaboveconforms
totheaboveDirective(s).
Manufacturer SAMSUNGTECHWINCO.,LTD LegalRepresentativeinEurope
Signature  Signature
FullName HANSEUGKIM  FullName
Position QUALITYCONTROLMANAGER Position
Place CHANGWON,KOREA Place
Date  2008.09.01 Date
MEMO

P/No. : Z6806-0820-01D
VAN 08. 09
www.samsungcctv.com
www.samsungtechwin.com
www.samsungcctvusa.com
•SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
TEL : [phone]~8158 FAX : [phone]
•SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : [phone] FAX : [phone]
•SAMSUNG TECHWIN AMERICA.
1480 Charles Willard St. Carson, CA 90746, UNITED STATES
TOLL FREE : [phone] FAX : [phone]
SALES NETWORK