Samsung SUD-2080N User manual

ENGLISH
Super High Resolution UTP Dome Camera SUD-2080 User Guide
Before installing and operating this product,
please read this manual thoroughly.

Before operating the camera, confirm the camera model and correct
input power voltage. To help you understand this manual thoroughly,
we'll introduce our model description.
n SUD-2080 SERIES
 •NTSCMODEL •PALMODEL
  SUD-2080N  SUD-2080P
n MODEL DESCRIPTION
 •SUD-2080X
_
 •SIGNALSYSTEM
  N→NTSCMODEL
  P→PALMODEL
This installation should be made by a qualified service person and
should conform to all local codes.
Thelightningflashwithanarrowheadsymbol,withinanequilateraltriangleis
intendedto alert theuser to thepresence of uninsulated“dangerous voltage”
withintheproduct'senclosurethatmaybeofsufficientmagnitudetoconstitute
ariskofelectricshocktopersons.
Theexclamationpointwithinanequilateraltriangleisintendedtoalerttheuser
tothepresenceofimportantoperatingandmaintenance(servicing)instructions
intheliteratureaccompanyingtheappliance.
INFORMATION -This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
WARNING - To prevent electric shock and risk of fire hazards:
◆Do NOT use power sources other than that specified.
◆Do NOT expose this appliance to rain or moisture.
SIGNALSYSTEM

COLOR DOME CAMERA User Guide
4
COLOR DOME CAMERA User Guide
5
Contents Features
Excellent Sensitivity
Thebuilt-inhighsensitivityCOLORCCDproduces
aclearimage.
-Color:0.15Lux(50IRE,@F1.2),0.0003LUX
(SENS-UP,x512)
-B/W:0.001Lux(50IRE,@F1.2),0.000002LUX
(SENS-UP,x512)
DAY&NIGHT(ICR)
Thiscamerahasafunctionthatautomatically
selectsthemodethatisappropriatefordaytime
ornight-timeconditions.
TheCOLORmodeoperatesindaytime
conditionstoprovideoptimumcolors,andB/W
modeoperatesinnight-timeconditionsto
enhancethedefinitionoftheimage.
DIS (Digital Image Stabilizer)
TheDISfunctioncompensatesforanycamera
movement,toproducemorestablepictures.
Communication
RS-485andCoaxialcommunicationmethodsare
supported.
-RS-485Communications:SAMSUNG-T,
SAMSUNG-E,PELCO-D,PELCO-P,BOSCH,
HONEYWELL,VICON,PANASONIC.
-CoaxialCommunications:PelcoCoaxitron
Miscellaneous Functions
HLC(HighLightCompensation),SENS-UP,FLIP
(H/V-REV),D-ZOOM,SHARPNESSandPRIVACY
functionsareprovided.
OSD
Thecamera’sOSDiscomplimentedby18languages.
-NTSC:English,Korean,Japanese,Spanish,French,
Portuguese,Taiwanese
-PAL:English,Chinese,German,Italian,French,
Spanish,Russian,Czech,Polish,Romanian,
Serbian,Swedish,Danish,Turkish,Portuguese
SSNR3 (Samsung Super Noise
Reduction) Function
Thehigh-performanceW-VDSPchipeffectively
removeslow-lightgainnoiseandafterimageto
provideclearimagesevenindarkenvironments.
High Resolution
Byadoptingadiagonal6mm(1/3")410,000(NTSC)
pixel,470,000(PAL)pixelSONYCCD,thecamera
producesclearpicturequalitywithahorizontal
resolutionof600TVlinesincolorandahorizontal
resolutionof700TVlinesinB/Wmode.
SSDR
(Samsung Super Dynamic Range)
Forimageswithhighcontrastbetweenbright
anddarkareasfromdifficultlighting
conditionssuchasbacklighting,thiscamera
selectivelyilluminatesdarkerareaswhile
retainingthesamelightlevelforbrighter
areastoevenouttheoverallbrightness.
UTP TX
OneUTPcabletransmitspowerforthecamera,
videosignalsandRS-485data;installationiseasy
andclean.(TIA/EIA-568B)
Motion Detection
Sincethecameradetectsmotionwithoutany
additionalexternalsensor,youcanmonitor
activitymoreefficient.
• Features ……………………………………………………………… 5
• Warnings & Cautions ………………………………………………… 6
• Precautions …………………………………………………………… 7
• Components and Accessories ……………………………………… 9
• Overview ……………………………………………………………… 9
• Installation …………………………………………………………… 11
nInstallation  
n Adjustthepanning,tiltingandrotatemechanismwhilecheckingthepositiononthemonitor  
nAdjustingvarifocallenszoomandfocus 
nSystemDiagram 
nRJ-45ConnectorSchematicDiagram 
nUsingCoaxialCommunications 
• Operating Your Camera ……………………………………………… 19
nMenuConfiguration  
nMenuSetup 
·LENS 
·EXPOSURE
·WhiteBal(WhiteBalance)  
·SSDR(SamsungSuperDynamicRange)  
·BACKLIGHT  
·SSNR3  
·DAY/NIGHT 
·SPECIAL 
·EXIT  
• Troubleshooting ……………………………………………………… 35
• Specifications ………………………………………………………… 36
• Dimension …………………………………………………………… 37

COLOR DOME CAMERA User Guide
6
COLOR DOME CAMERA User Guide
7
SamsungTechwincaresfortheenvironmentatallproduct
manufacturingstagestopreservetheenvironment,andistakinga
numberofstepstoprovidecustomerswithmoreenvironment-
friendlyproducts.TheEcomarkrepresentsSamsungTechwin’swill
tocreateenvironment-friendlyproducts, andindicatesthatthe
productsatisfiestheEURoHSDirective.
Thisinformationisprovidedtoensureyoursafetyandtopreventanylosses,financialor
otherwise.Pleasereaditcarefullyandusetheproductaccordingly.
Warnings & Cautions
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as
an aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug during a thunder storm.
* This product is support equipment for surveillance system. Therefore, we can't compensate for material loss and/or
personal injuries by robbery, fire, natural disaster or other such events.
Ignoringthisinformationmay
resultinmateriallossand/or
seriouspersonalinjuriesincluding
death.
Indicates“NeverAllowed.”
Ignoringthisinformationmay
resultinmateriallossand/ora
slightinjuries.
Indicates“NoDisassembling.”
Warning/Attention/SpecialMarkMessages
Precautions
Donotinstallunderextreme
temperatureconditions.
Use only under temperature conditions between
-10°C and +50°C. Provide good ventilation
when using in high temperature conditions.
Donotinstallinhighhumidity
environment.
May lower image quality.
Donotinstallunderunstable
lightingconditions.
Severe lighting changes or flickering may
hinder normal camera operation.
Avoidtouchingthecameralens.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Donotdropthecameraorsubjectit
tophysicalshock.
May cause a product malfunction.
Neverkeepthecamerafaceto
stronglightdirectly.
May damage the CCD.

COLOR DOME CAMERA User Guide
8
COLOR DOME CAMERA User Guide
9
Precautions
Components and Accessories
Donotexposethecamerato
radioactivity.
If exposed to radioactivity, the CCD will fail.
Whenconnectingcables,besureto
readtheinstructionscarefullyand
followeachstepasinstructed.
Failure to do so may result in critical
system damage.
•Exposuretoaspotlightoranobjectemittingstronglightmaycausesmearor
blooming.
•Ensurethatthepowersourcecomplieswithnormalspecificationsbefore
supplyingittothecamera.
Notes
Donotexposethecameratorainor
othertypesofliquids.
May cause a product malfunction.Wipe dry any
liquids. Liquids may contain minerals that are
corrosive to electronic components.
❶SuperHighResolutionUTPDomeCameraSUD-2080

2InstructionManual
3M4TappingScrew4EA

4M4MachineScrew4EA

5Adapterplate
6InstallationVideoOutputCable
❶
6
5
24 3
Overview
5
4
13
❿
❿2
6
7
8

COLOR DOME CAMERA User Guide
10
COLOR DOME CAMERA User Guide
11
Installation
Installation
PanBracket: Control panning angle of camera.
RotateBody: Control rotating angle of camera.
x3.6Vari-focalLensModule:2.8 ~ 10.0mm(F1.2).
VideoOutputTerminaltoMonitor
Function Setup switch: Display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
 UTPCable:For supplying AC 24V / AC28V power to the camera and transmitting video
signals.
VideoOutputJack:Video signals are output through this port. Connect this port to the
Video IN port of a monitor.
Powerinputterminal: If the UTP cable cannot be connected for power supply (distance
over 300m(1000ft), for example), this cable is used instead for connecting DC 12V / AC
24V power to the camera.
DomeCover
ShieldCase
Overview
1) Separate the dome cover by rotating anti-clockwise.
2) Separate the shield case by pulling from the camera body.
•Theinstallationshouldbedonebyqualifiedservicepersonnelorsyteminstallers.
•Iftheceilingmaterialisnotstrongenoughtoholdtheinstallationscrews,thecamera
mayfalloff.Reinforcetheceilingasneeded.
Notes
* To install the dome cover on the camera
body, turn the latches in locking direction
as shown in the figure 1.
Locking direction
(Clockwise)
Latch
Locking direction
[Figure 1]
Main Body
(Camera)
Shield Case
Dome cover
Unlocking direction
(Anti-clockwise)

COLOR DOME CAMERA User Guide
12
COLOR DOME CAMERA User Guide
13
Installation
When installing on a adapter plate
1) Place the bracket provided on the installation
surface and fix it with the M4 tapping screws
(provided).
2) When placing the camera body on the plate,
insert the plate pin into the mounting hole on
the body as shown in figure 2 and fix it by
turning clockwise.
3) When placing the camera body on the plate,
make sure the camera cables pass through their
respective designated holes.(When placing the
cable through its side, thread it through the
hole at the bottom.)
4) After installation and adjustment of the camera
are complete, secure the dome cover by turning
it clockwise.
[Figure 2]
Locking direction
Plate pin
Unlocking direction
• Please locate an arrow on bracket for installing direction that you wish to observe
Area and then fix it with the M4 tapping screws.
Notes
Unlocking
direction
M4 tapping
screw (provided)
Dome cover
Adapter plate
An arrow for installing directions
CAMERA
Locking
direction
Adjust the panning, tilting and rotate mechanism while checking the position on the monitor
1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
 •PanBracketmovesby170°ineachdirectionor340°onthewhole.
 •TiltBodycovers73°ineachdirectionor146°intotal.
 •TheanglerangeoftheRotateBodyisthesameasthatofthePanBracket.Butone
directionrangeis195°andanotheris145°
2) Methods of adjustment
 •The case of wall installation
1 After mounting the camera on a wall, adjusting the panning angle so that the camera can
face the direction to monitor when tilted.
2 Adjust the tilting angle by rotating the tilt base.
3 Loosen the rotate base hold screw and adjust rotate base for the best view.
4 Tighten the rotate base hold screw.
 •The case of ceiling installation
1 After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing
position by rotating the pan base.
2 Adjust the tilting angle by rotating the tilt base.
3 Loosen the rotate base hold screw and adjust rotate base for the best view.
4 Tighten the rotate base hold screw.
73˚
-170˚
145˚ 195˚
170˚
Pan Base
Tilt Base
Rotate Base

COLOR DOME CAMERA User Guide
14
COLOR DOME CAMERA User Guide
15
Installation
1) Unlock the zoom(focus) handle by turning anti-clockwise.
2) Adjust the zoom(focus) by moving the handle to WIDE(FAR) or TELE(NEAR).
3) After adjustment, tighten the zoom(or the focus) handle, taking care that the adjusted
position does not change.
ZoomHandle
FocusHandle
Adjusting varifocal lens zoom and focus
2. UTP Receiver Link Setup(Additional Power input is needed)
SUD-2080 1Ch Passive Receiver DVR Monitor
225m(750ft) or Less
1Ch Passive Receiver
System Diagram
1. SUD-2080 4Ch Power Supply 4Ch Receiver DVR/Monitor/Controller
The maximum power transmission distance for the camera is 300m(1000ft), and the
distance between the camera and the 4ch Receiver cannot exceed 900m(3000ft).
CH1 CH2 CH3 CH4
300m(1000ft)orLess
900m(3000ft)orLess
SCC-3100A
SUD-2080
RS-485
SPU-400T SPU-400R
VIDEO
UTPCABLE
BNCCABLE
RS-485
UTPPowerSupplyLinkSetup

COLOR DOME CAMERA User Guide
16
COLOR DOME CAMERA User Guide
17
Installation
18
81
No. Line Color Camera to Power Supply Power Supply to Receiver
1White+Orange VIDEO (+) CH1 VIDEO (+) / RS-485 (+)
2Orange VIDEO (-) VIDEO (-) / RS-485 (-)
3White+Green RS485 (+) CH2 VIDEO (+) / RS-485 (+)
4Blue POWER (-) VIDEO (-) / RS-485 (-)
5White+Blue POWER (+) CH3 VIDEO (+) / RS-485 (+)
6Green RS485 (-) VIDEO (-) / RS-485 (-)
7White+Brown POWER (+) CH4 VIDEO (+) / RS-485 (+)
8 Brown POWER (-) VIDEO (-) / RS-485 (-)
UTP CABLE
The camera uses UTP cable for transmitting video signals, power and transferring RS-485 control
data.(TIA/EIA-568B)
•Usingtheproductwiththird-partyUTPperipheralsmayresultindegradationofproduct
functionandperformance.
•Attenuationanddistortioninsignalmayoccurifthemaximumtransmissiondistanceis
exceeded.Pleasenotethat depending ontheinstallationenvironment/condition,the
signalmaybecomeattenuatedanddistortedandcausethecameratofunction
incorrectlyevenwhenthetransmissiondistanceiswithinthemaximum.
•IfusingRS-485communicationpleaseuse theSAMSUNG-T,SAMSUNG-E,PELCO-D,
PELCO-P,BOSCH,HONEYWELL,VICONandPANASONICProtocol.
•If you are using the 1Ch PassiveReceiversystemsetup,pleaseconnecttheadapter
(AC24VorDC12V)directlytothecamera.
Notes
No. Line Color Camera to Power Supply Power Supply to Receiver
1White+Orange VIDEO (+) CH1 VIDEO (+) / RS-485 (+)
2Orange VIDEO (-) VIDEO (-) / RS-485 (-)
3White+Green RS485 (+) CH2 VIDEO (+) / RS-485 (+)
4Blue POWER (-) VIDEO (-) / RS-485 (-)
5White+Blue POWER (+) CH3 VIDEO (+) / RS-485 (+)
6Green RS485 (-) VIDEO (-) / RS-485 (-)
7White+Brown POWER (+) CH4 VIDEO (+) / RS-485 (+)
8 Brown POWER (-) VIDEO (-) / RS-485 (-)
Copper Connector
UTP Coating
The SUD-2080 uses UTP cable to receive its power (AC24V/AC28V) from the Power Supply.
Therefore, a separate adapter is not required. Please refer to the RJ-45 Connector Schematic
Diagram.
RJ-45 Connector Schematic Diagram

COLOR DOME CAMERA User Guide
18
COLOR DOME CAMERA User Guide
19
• Coaxial Communications System
• OSD Control method
Using Coaxial Communications
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below : If the distance between the camera and the monitor
exceeds the recommended maximum, please use an auxiliary video amp.
• It is recommended that pure copper coax cable is used and not copper coated
steel, as this will cause issues with the communication over the coaxial cable.
Notes
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
DVD
DVR
• : BNC
• ---- : RS-485
Installation Operating Your Camera
MAIN SETUP
LENS DC

EXPOSURE BRIGHTNESS
 SHUTTER  AGC 
SENS-UP RETURN
WHITEBAL ATW
 OUTDOOR  INDOOR 
MANUAL  AWC→SET
SSDR OFF
 ON
BACKLIGHT OFF
 BLC  HLC
SSNR3 ON
 OFF
DAY/NIGHT AUTO
 COLOR  B/W
SPECIAL
IMAGE ADJ  MONITOR  CAM TITLE 
SYNC MOTION DET  PRIVACY 
COMM ADJ  LANGUAGE  RETURN
EXIT SAVE
 NOT SAVE  RESET
Use the Function Setup switch within the camera.
Function Setup switch
Menu Configuration
Menu Setup

COLOR DOME CAMERA User Guide
20
COLOR DOME CAMERA User Guide
21
Operating Your Camera
2. Select a desired function using the Function Setup switch.
 •Placethecursoroveradesireditem.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
9.EXIT SAVE
Select the function using
the Function Setup switch.
Change the status using
the Function Setup switch.
• An item with the icon also has sub menus. To select a sub menu, select an item with
the icon and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
Notes
1. Press the Function Setup switch.
 •Mainsetupmenuisdisplayedonthemonitorscreen.
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, selectLENSby using the Function
Setup switch so that the arrow indicatesLENS.
LENS
MAIN SETUP
1.LENS DC
2.EXPOSURE
 You can adjust the minimum shutter and maximum value of ESC shutter mode.
2. The Lens mode has sub menu site as listed below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus
Settings mode. To a Activate the Focus Settings mode, adjust the lens
focus, and then deactivate the settings mode.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE’ by using the Function
Setup switch so that the arrow indicates 'EXPOSURE’.
2. Select a desired mode using the Function Setup switch.
EXPOSURE SETUP
1.BRIGHTNESS 25
2.SHUTTER ---
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
SHUTTER : You can select the shutter.
- --- : Shutter speed is fixed at 1/60sec(1/50sec).
- ESC : Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60sec~1/120,000sec, PAL MODEL : 1/50sec~1/120,000sec)
- A.FLK : Select this when you experience picture flicker, this happen when there
is a clash with the installed lighting frequency.

COLOR DOME CAMERA User Guide
22
COLOR DOME CAMERA User Guide
23
Operating Your Camera
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but
the higher the noise.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
• Set the shutter mode to --- if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the
picture may become unstable if the camera faces a bright fluorescent light. Therefore,
take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Notes
• If you set the Function Setup switch to ‘AUTO’ mode, You can adjust the brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
Notes
RETURN : Select this to save the changes in the EXPOSURE menu and return to the
SETUP menu.
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function
Setup switch so that the arrow indicates ‘White Bal’ .
2. Select a desired mode using the Function Setup switch.
White Bal (White Balance)
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
 Select one of the following 5 modes, as appropriate for your purpose.
 ATW : Select this when the color temperature is between 1,700˚K and
11,000˚K.
 OUTDOOR : Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
 INDOOR : Select this when the color temperature is between 4,500˚K and
8,500˚K.
MANUAL : Select this to fine-tune White Balance manually. Set White Balance
first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and the Function Setup switch.
 AWC SET : To find the optimal luminance level for the current environment, point
the camera towards a sheet of white paper and press the Function
Setup switch. If the environment changes, readjust it.
• White Balance may not work properly under the following conditions. In this case select
the AWC mode.
❶  When the color temperature of the environment surrounding the subject is out of the
control range (e.g. clear sky or sunset).
2
When the ambient illumination of the subject is dim.
3
 If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
Notes

COLOR DOME CAMERA User Guide
24
COLOR DOME CAMERA User Guide
25
Operating Your Camera
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
SSDR (Samsung Super Dynamic Range)
SSDR illuminates darker areas of an image while retaining the same light level for brighter
areas to even out the overall brightness of images with high contrast between bright and
dark areas.
SSDR OFF
1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup
switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
SSDR ON
BACKLIGHT
The SUD-2080 is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, by adopting a function of the proprietary
W-V DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates ‘BACKLIGHT’.
2. Select a desired mode using the Function Setup switch depending on the camera purpose.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
OFF : Not being used
 HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the
light can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE : Change the color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
 BLC :
Enables a user to select a desired area on a picture and view that area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
3. Select a desired mode using the Function Setup switch.
Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.
HLC : Enable the user to change the level,
limit, mask color/tone and area.

COLOR DOME CAMERA User Guide
26
COLOR DOME CAMERA User Guide
27
Operating Your Camera
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size. (In
NIGHT ONLY mode.)
• The HLC is not activated in day light or when bright light is not present at night. (In NIGHT
ONLY mode.)
Notes
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup
switch so that the arrow indicates ‘SSNR3’ .
SSNR3
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
2. Select a desired mode using the Function Setup switch.
 ON : Activates SSNR3 so that noise is reduced.
 OFF : Deactivates SSNR3. Noise is not reduced.
3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can adjust
the noise reduction level.
 AUTO : The mode is switched to ’Color‘ in a normal
environment, but switches to ’B/W‘ mode
when ambient illumination is low. To set up the
switching time for AUTO mode, press the
Function Setup switch.
You can turn on or off the burst signal on
B/W mode.
You can display pictures in color or in black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function
Setup switch so that the arrow indicates ‘DAY/NIGHT’.
DAY/NIGHT
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is
‘OFF’.
• When adjusting the noise reduction level in the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced, as will the brightness of the image.
Notes

COLOR DOME CAMERA User Guide
28
COLOR DOME CAMERA User Guide
29
Operating Your Camera
• When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'AUTO' mode
cannot be selected.
Notes
1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup
switch so that the arrow indicates ‘SPECIAL’.
SPECIAL
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
- DURATION : You can select brightness of illumination about changing the day/night mode.
- DWELL TIME :You can select the duration time about changing the day/night mode. 
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
 COLOR : The picture is always displayed in color.
 B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
SPECIAL
1. IMAGE ADJ
2. MONITOR LCD
3. CAM TITLE OFF
4. SYNC INT
5. MOTION DET OFF
6. PRIVACY OFF
7. COMM ADJ
8. LANGUAGE ENGLISH
9. RETURN
2. Select a desired mode using the Function Setup switch.
 IMAGE ADJ :
1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the
Function Setup switch so that the arrow indicates ’IMAGE ADJ‘.
IMAGE SETUP
1. V-REV OFF
2. H-REV OFF
3. D-ZOOM OFF
4. DIS OFF
5. FONT COLOR WHITE
6. SHARPNESS ON
7. RETURN
2) Select a desired mode using the Function Setup switch.
 • V-REV : You can flip the picture vertically on the screen.
 • H-REV : You can flip the picture horizontally on the screen.
 • D-ZOOM : You can use a digital zoom of x1 ~ x16.
 • DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to
external factors such as wind.
 • FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
 • SHARPNESS : As you increase this value, the picture outline becomes stronger and

COLOR DOME CAMERA User Guide
30
COLOR DOME CAMERA User Guide
31
Operating Your Camera
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• If you increase the SHARPNESS level too high, the picture may become distorted or
noise may appear.
• As the DIS function uses the digital zoom, the camera's resolution will decrease.
• DIS doesn’t operate when background illumination is too low.
• DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
Notes
clearer. Adjust this value appropriately depending on the sharpness of
the picture.
 • RETURN : Select this to save the settings for the IMAGE ADJ menu and to return
to the SPECIAL menu.
Monitor : Please change the settings value of video
appropriate to your monitor.
- LCD : Please select this menu item when using an
LCD monitor.
You can change the gamma, PED level and
color gain in the sub menus.
- USER : Please use this menu item when using a monitor
other than standard ones. You can change the gamma, PED level, and color gain in
the sub menus.
- CRT : Please select this menu item when using a CRT monitor. You can change the PED
level, color gain in the sub menus.
 CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the
arrow indicates ‘CAM TITLE’.
2) Set it to ‘ON’ by using the Function Setup
switch.
3) Press the Function Setup switch.
4) Use the Function Setup switch to move
to a desired letter and select the letter by
pressing the Function Setup switch.
Repeat this to enter multiple letters. You
can enter up to 15 letters.
CAMERA TITLE SETUP
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.0123456789
CLR POS END
FRONT DOOR
5) Enter a title, move the cursor to ‘POS’ and press
the Function Setup switch. The entered title
appears on the screen. Select the position to
display the title on the screen by using the
Function Setup switch and press the Function
Setup switch. When the position is determined,
select ‘END’ and press the Function Setup
switch to return to the SPECIAL menu.
• When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even
if you enter one.
• Only English is available in this mode.
• If you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup switch. Move the cursor over the letter to be edited, move the cursor to
the letter to be inserted and then press the Function Setup switch.
Notes
 SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL), you can synchronize the output
phase of multiple cameras using the power
synchronization function (Line-Lock) without
using a synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
• When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L
type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
• When using RJ-45 Connector, you can't use the L/L type synchronization.
Notes

COLOR DOME CAMERA User Guide
32
COLOR DOME CAMERA User Guide
33
Operating Your Camera
MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the
screen, and the words 'MOTION DETECTED' appear
on the screen when movement is detected.
You can monitor activity more efficient.
 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicatesMOTION DET.
2) Set up the mode using the Function Setup switch.
- SENSITIVITY : You can select up to 8 MD areas.When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- FILLSET : Fills in a selected MD area. The color of filling is sequentially selected
as brown, orange, blue, cyan, green, yellow, magenta and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the
SPECIAL menu.
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA AREA1
2. MODE OFF
3. MASK COLOR GREEN
4. MASK TONE 1
5. TOP 39
6. BOTTOM 79
7. LEFT 13
8. RIGHT 52
9. RETURN
- CAM ID : Determines the camera's identification
number (between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/
38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for
the parity bits.
- RET PKT : Determines whether to send a command
back to the controller device when a
communication control command is sent to the camera.
- DISP ID : Display camera title on top left corner of the screen.
- PROTOCOL : Select the communication PROTOCOL.
(SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and
PANASONIC)
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
1)  When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates ‘PRIVACY’.
2)  Set up the mode using the Function Setup switch.
- AREA : You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA.
- MASK COLOR: Determine area color. You can select Green, Red, Blue, Black, White,
Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
* Initial value of communication adjustment
Item Camera ID BAUD RATE UART MODE PET PKT
Initial value 19600 8-NONE-1 ENABLE
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the camera
through an external control device.
1)  When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates ‘COMM ADJ’.
2)  Set up the mode using the Function Setup switch.

COLOR DOME CAMERA User Guide
34
COLOR DOME CAMERA User Guide
35
Operating Your Camera
Select a desired EXIT mode using the Function Setup switch depending on the camera
purpose.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Communication,
Language and Monitor settings are not initialized.
EXIT
 LANGUAGE : You can select the menu language according to your requirements.
 RETURN : Select this to save the SPECIAL menu settings and return to the MAIN
SETUP menu.
• As below, the names of protocol have been changed.
- STW(SPD)  SAMSUNG-T
- SEC  SAMSUNG-E
Notes If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
● Nothing appears on the screen.
▶Check that the power cord and line connection between the camera and monitor are
properly connected.
▶Check that you have properly connected UTP cable or BNC cable to the camera.
▶Check the pin arrangement for the UTP cable. (TIA/EIA-568B)
● The image on the screen is dim.
▶Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶Set the monitor to the proper condition.
▶If the camera is exposed to very strong light, change the camera position.
● The image on the screen is dark.
▶Adjust the contrast feature of the monitor.
▶If you have an intermediate device, set the 75Ω/ Hi-z properly.
● The camera is not working properly, and the surface of the camera is hot.
▶Check that you have properly connected the camera to an appropriate power source.
● The SENS-UP function does not work.
▶Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
● The Motion Detection function does not work.
▶Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
● Color is not correct.
▶Check the setting of WHITE BAL SETUP menu.
● The screen flickers continually.
▶Ensure the camera is not pointing towards the sun.
● When coaxial communication is not available.
▶ Make sure that the camera and monitor are installed within the recommended distance.
▶ Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.
● Picture is distorted.
▶Check the length of the UTP cable (900m(3000ft) or less).
● The camera does not work, and the video feed from the camera is not being
received.
▶Check the Power Supply to see whether the connection status and pin arrangement for
the camera's UTP cable and the Camera Input UTP cable are normal.
Troubleshooting

COLOR DOME CAMERA User Guide
36
COLOR DOME CAMERA User Guide
37
SUD-2080N SUD-2080P
ELECTRICAL
Input Voltage AC 24V ±10% / AC 28V ±10% / DC12V±10%
Power Consumption Max 3.5W
VIDEO
Imaging Device 1/3 inch, Diagonal 6mm Super HAD CCD
Total / Effective Pixels 811(H) x 508(V) / 768(H) x 494(V) 795(H) x 596(V) / 752(H) x 582(V)
Scanning System 2:1 Interlace
Synchronization Internal / Line-Lock
Frequency H: 15.734KHz / V : 59.94Hz H: 15.625KHz / V: 50.00Hz
Horizontal Resolution COLOR : 600TVL, B/W : 700TVL
Min. Illumination COLOR : 0.15 Lux (50IRE, @F1.2), 0.0003Lux (SENS-UP, x512)
B/W : 0.001Lux (50IRE, @F1.2), 0.000002Lux (SENS-UP, x512)
S/N (Y Signal) 52dB (Weight ON, AGC OFF)
Video Output CVBS : 1.0Vp-p, 75Ω composite
UTP Built-in UTP TX (Maximum transmission length 900m(3000ft)) : Balanced differential signal 100Ω
LENS
Zoom Ratio / Focus Length 3.6x (Manual) / 2.8 ~ 10.0mm (F1.2)
Angular Field of View H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)
Pan / Tilt / Rotate Range 0° ~ 340° / 0° ~ 146° / 0° ~ 340°
OPERATIONAL
Electronic Shutter Speed 1/60sec~1/120ksec 1/50sec ~ 1/120ksec
Shutter Mode FIXED, ESC, MANUAL, A.FLK
ON Screen Display
NTSC : English, Korean, Japanese, Spanish, French, Portuguese, Taiwanese
PAL : English, Chinese, German, Italian, French, Spanish, Russian, Czech, Polish,
Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
SSDR ON / OFF (Level adjustable)
Backlight Compensation BLC / HLC / OFF
Day & Night COLOR / BW / AUTO (ICR)
Gain Control LOW / HIGH / OFF
White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration) AUTO / OFF (Selectable x2 ~ x512)
Motion Detection ON / OFF (8 Programmable zones)
Privacy Masking ON / OFF (12 Programmable zones)
3D Noise Filter (SSNRIII) ON / OFF (Level adjustable)
Digital Zoom ON / OFF (x1 ~ x16)
Camera Title ON / OFF (Display 15 Characters)
Sharpness ON / OFF (Level adjustable)
Flip / Mirror ON / OFF
Coaxial Communication Pelco Coaxitron
RS-485 Communication SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC
ENVIRONMENTAL
Operating Temperature / Humidity -10°C ~ +50°C / 30% ~ 80% RH
MECHANICAL
Dimension / Weight Ø141.2 x 105.5mm / 520g
Specifications
The specification for this product may change without prior notice for product improvement.
This specification is based on a transmission distance of 500 meters; in cases of long-distance
transmissions, some degradation in picture quality may occur depending on the operating environment.
Ø141.2
R48
108mm
105.5mm
Dimension

COLOR DOME CAMERA User Guide
38
COLOR DOME CAMERA User Guide
39
DECLARATION OF CONFORMITY
ApplicationofCouncilDirective(s) 2004/108/EC
Manufacturer'sName SAMSUNGTECHWINCO.,LTD
Manufacturer'sAddress SAMSUNGTECHWINCO.,LTD
 42,SUNGJU-DONGCHANGWON-CITY,
 KYUNGNAM,KOREA,641-716
EuropeanRepresentativeName
EuropeanRepresentativeAddress
EquipmentType/Environment CCTVCamera
ModelName SUD-2080P
BeginningSerialNO. C5786V3Z200001X
YearofManufacture 2010.02.01
Conformanceto EN55022:2006
 EN50130-4:2003
We,theundersigned,herebydeclarethat the equipment specifiedaboveconforms
totheaboveDirective(s).
Manufacturer SAMSUNGTECHWINCO.,LTD LegalRepresentativeinEurope
Signature  Signature
FullName BONJENGGU FullName
Position QUALITYCONTROLMANAGER Position
Place CHANGWON,KOREA Place
Date 2010.02.01 Date
MEMO