Sangean WR-22WL User manual

中文
Version 1
GB
WR-22

1
GB
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet. consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

2
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged. liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
To Reduce the Risk of Fire or Electric Shock, Do not Expose
This Appliance To Rain or Moisture.
11.
12.
13.
14.
15.

3
GB
The Shock Hazard Marking and Associated Graphical Symbol
is provided on the rear of unit.
Apparatus shall not be exposed to dripping or splashing and no
objects lled with liquids, shall be placed on the apparatus.
Excessive sound pressure on ear- and headphones could
impair the hearing ability. Higher setting that idle on the
equalizer leads to higher signal voltages on the output for ear
and headphones.
The power plug should be close to the radio, and easy to be
approached that during the emergency, to disconnect the power
from the radio, just unplug the power plug from the AC power
slot.
Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnected device shall remain readily
operable.
16.
17.
18.
19.
20.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to
the antenna or the device could result in the device exceeding the
RF exposure requirements and void user’s authority to operate the
device.

4
1 2 345678 9 10 11
12
13
14
1516
17
181920

5
GB
Controls
Speaker
Bluetooth indicator
Display
Source button
Play mode button
Alarm 1 button
Alarm 2 button
Nap button
Menu / Info button
On / Off button / Sleep button
Rotary tuning control
Volume control / Tone control
Dimmer sensor
Remote control sensor
Preset 5 / Fast-forward button
Preset 4 / Play / Pause button
Preset 3 / Backward button
Preset 2 / Fold up button
Preset 1 / Fold down button
USB port
Reset button
2
1
3
5
7
20
19
18
17
16
15
14
13
12
11
10
9
4
6
8
21

6

7
GB
Controls
AC power cord socket
12V DC input socket
Subwoofer output socket
AUX IN socket
Headphone socket
External / Internal antenna switch
External F-type FM antenna terminal
& External AM antenna terminal (USA version only)
3029
28
27
26
25
24
23
22
Display
Frequency / Station display
RDS / RBDS indicator
Nap indicator
PM indicator
Time indicator
Sleep indicator
Alarm 1 indicator
Alarm 2 indicator
Fast-forward indicator
Play / pause indicator
Backward indicator
Shufe
Repeat all
Repeat folder
Repeat one
Repeat section A-B
Stereo indicator
H
G
F
E
D
C
B
A
N
M
L
K
J
I
Q
P
O

8
Remote control
On / Off button / Sleep button
Alarm1 button
Volume control button
Alarm 2 button
Nap button
Preset 1 / Folder down button
Preset 3 / Backward button
Preset 2 / Folder up button
Preset 4 / Play / Pause button
Preset 5 / Fast-forward button
Play mode button
Tone control button
Repeat A-B / Select button / Bluetooth pairing button
Tuning up / down button
Info / menu button
Source button
h
g
f
e
d
c
b
a
n
m
L
k
j
i
p
o

9
GB
Power your radio
AC operation
Before plugging the AC cord into the radio, make sure the AC
voltage is correct. Insert the plug on the end of the supplied power
cord into the AC power socket on the back of the radio.
DC operation
For outdoor use, you can power the radio by using 12v DC input
socket from a DC power supply (example, from the power supply of
vehicles or boats). An AC power adaptor with 1 Ampere and center
positive in polarity can also power the radio in house.
Antenna setup for FM reception
The radio comes with built-in AM/FM antenna and external antenna.
To use FM internal antenna, make sure to switch FM external/
internal antenna switch in the back of your radio to internal antenna
position (i.e. INT. FM ANTENNA). As for external antenna, there
are two types of antenna can be used to improve FM reception.
You can connect the supplied FM antenna to the F-type antenna
terminal and adjust the wire for best reception. You can also
connect a 75 ohm coaxial cable of outdoor antenna to the terminal.
Make sure to switch external/internal antenna switch to external
position while connecting the outdoor / rooftop antenna.
Note:
In some of the European countries, you may have to use adaptor
plug to connect with the outdoor/rooftop antenna in case your
antenna has an incorrect type of plug.