Sanus Systems Monitor Mount VMTV User manual

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • 651-484-7988
[email protected]om • www.sanus.com
©2008 Milestone AV Technologies
VMTV
(6901-100175 <01>)
Thank you for choosing a Sanus Systems VMTV monitor mount.The VMTV monitor mount is designed to support
monitors 13 to 27 inches (33 to 68 cm); maximum weight capacity is 45 kg (100 lbs.). The VMTV monitor mounts are
adjustable, allowing up to 110˚ of swivel, up to 180˚ of roll, and three tilt settings 0˚, -5˚, and -10˚.
Do not use this product for any purpose not explicitly specied by Sanus Systems. Improper assembly may cause
property damage or personal injury. If you do not understand these directions, or have doubts about the safety
of the assembly, contact Customer Service or call a qualied contractor. Sanus Systems is not responsible for
damage or injury caused by incorrect assembly or use.
CAUTION
This product contains small items that could be a choking hazard if swallowed. Keep these items away
from young children!
WARNING
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
002555.eps
TWM - complete assembly
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to ve times
the weight of the monitor and mount combined. If you have any doubts about the ability of the wall to support
the monitor, contact Customer Service, or a qualied contractor.
CAUTION

6901-100175 <01>
7/32 in.
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item
to your dealer; contact Customer Service. Never use damaged parts!
002556.eps
TVM - parts list
[01] x 1 [02] x 1 [05] x 1
[04] x 1[03] x 1
[06] x 1 [07] x 1
[08] x 1 [09] x 4 [10] x 1
[11] x 1 [12] x 1 [13] x 1 [14] x 1 [15] x 1

6901-100175 <01>
002557.eps
TWM - Mount to wood stud
1
002557.eps
TWM - Mount to wood stud
002557.eps
TWM - Mount to wood stud
002557.eps
TWM - Mount to wood stud
63.5 mm
(2.5 in.)
7/32 in.
[01]
[09]
[01]
Avoid potential injuries or property damage! Do not
overtighten the lag bolts [09]. Tighten the bolts only
until they are pulled rmly against the wall plate [01].
CAUTION

6901-100175 <01>
002558.eps
TWM - Install Arm
2
002558.eps
TWM - Install Arm
[06]
[08]
Do not overtighten the pivot nut [12]. The
arm [03] must be free to move.
NOTE
002558.eps
TWM - Install Arm
[03]
[10]
[12]
[02]

6901-100175 <01>
3
002561.eps
TWN - Choose tilt setting
-10° Tilt
-5° Tilt
0° Tilt
002559.eps
TWM - install platter
[11]
[15]
[14]
[13]
002561.eps
TWN - Choose tilt setting
Avoid potential injuries or property damage!
Be sure the square shoulder of the bolt [11]
seats completely into the square hole before
tightening the bolt.
CAUTION
Avoid potential injuries or property damage! Do
not use the -10° Tilt position for monitors larger
than 23 in. (68 cm) or weighing more than 27 kg
(60 lbs.).
CAUTION
[11]

6901-100175 <01>
002559.eps
TWM - install platter
4
[06]
5
002560.eps
TWM - Adjust platter size
002560.eps
TWM - Adjust platter size
Loosen the eight fasteners shown. Adjust the
platter so that the slots [A] are slightly wider than
the width of the monitor. Retighten the fasteners.
NOTE
[A]
[A]

6901-100175 <01>
6
12
3
Avoid potential injuries or property damage!
Never leave the monitor on the wall mount
unless the strap [04] is securely fastened.
CAUTION
[04]
HEAVY! You will need assistance
with this step. Have an assistant hold
the monitor in place on the platter
while you secure the strap [04].

6901-100175 <01>
Milestone AV Technologies, Inc. and its affiliated corporations and subsidiaries (collectively,“Milestone”),intend to make this manual accurate and complete.However, Milestone makes no
claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this
product.The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied,
regarding the information contained herein.Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.