Sanyo DSR-2108 User manual

DSR-2116
DSR-2108
About this manual
Before installing and using this unit, please read this manual carefully.
Be sure to keep it handy for later reference.
INSTRUCTION MANUAL
Digital Video Recorder
with Multiplexer Function
DSR-2108
DSR-2116
GB
●Refer to the included CD-ROM for the German, French, Spanish and Italian “INSTRUCTION MANUAL”.
●Die “BEDIENUNGSANLEITUNG” in den Sprachen Deutsch, Französisch, Spanisch und Italienisch
finden Sie auf der beiliegenden CD-ROM.
●Utilisez le CD-ROM fourni pour consulter le “MANUEL D’INSTRUCTIONS” en allemand, français,
espagnol et italien.
●Consulte en el CD-ROM suministrado el “MANUAL DE INSTRUCCIONES” en alemán, francés, español e
italiano.
●Per il “MANUALE DI ISTRUZIONI” in Tedesco, Francese, Spagnolo e Italiano, fare riferimento al
CD-ROM allegato.
L8HBT_WA(DSR-2116_2108)(GB).book 1 ページ ２００９年５月２７日 水曜日 午後４時５０分

i
Table of Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
These precautions must be followed for safety reasons. . . . iii
Follow the points outlined below for proper use . . . . . . . . . . vi
Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Main parts replacement timings . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About the split screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Names and functions of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Names of each part and connections. . . . . . . . . . . . . . . . . . . . . . 4
Basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Network connection (LAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting to the RS-485 control terminal . . . . . . . . . . . . . . . 6
Switching the power on / off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ASwitching the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BSwitching the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pre-operation preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ASetting the television system and the monitor output . . . 9
BSetting the clock (CLOCK SET) . . . . . . . . . . . . . . . . . . . . . . 9
CSetting the language (LANGUAGE) . . . . . . . . . . . . . . . . . . 11
DSetting the RS-485 termination switch
(SANYO SSP side). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Monitoring the camera videos . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ASingle-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
BQuad-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CMulti-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DCamera sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operating the PTZ dome camera . . . . . . . . . . . . . . . . . . . . . . . . 14
1Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AReal time recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
BCONTINUOUS recording. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CMOTION recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DALARM recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ESCHEDULE recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Playing back recorded videos. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
AEVENT SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
BTIMELINE SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CT/D SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DGO FIRST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
EGO LAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FLOG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
GBOOKMARK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Copying recorded video to recording media. . . . . . . . . . . . . . . 26
AInserting recording media . . . . . . . . . . . . . . . . . . . . . . . . . 26
BCopying live videos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
CCopying a playback video . . . . . . . . . . . . . . . . . . . . . . . . . 27
DPlaying back copied videos . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting the security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Configuration and function of the Menu settings . . . . . . . . . . . 29
LIVE settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ASetting the OSD and OSD CONTRAST . . . . . . . . . . . . . . . 31
BSetting the SEQUENCE and SEQUENCE-DWELL TIME . . . 31
CSetting the EVENT BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DSetting a CHANNEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
EAlarm input output settings . . . . . . . . . . . . . . . . . . . . . . . . 32
FSetting the MON2 (Monitor2)-OUT . . . . . . . . . . . . . . . . . . . 33
RECORD settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ASetting the RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . . . 35
BSetting a CHANNEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
CSetting the TIMER SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DSetting the REAL-TIME RECSET . . . . . . . . . . . . . . . . . . . . 36
SYSTEM settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ASetting the DVR ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BDESCRIPTION confirmation . . . . . . . . . . . . . . . . . . . . . . . . 37
CSetting the LOAD DEFAULT . . . . . . . . . . . . . . . . . . . . . . . . 37
DSetting an ADMIN PASSWORD . . . . . . . . . . . . . . . . . . . . . 38
ESetting the USER PASSWORD. . . . . . . . . . . . . . . . . . . . . . 39
FSetting a NETWORK PASSWORD . . . . . . . . . . . . . . . . . . . 39
GSetting the DATE FORMAT. . . . . . . . . . . . . . . . . . . . . . . . . 40
HSetting the CLOCK SET . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
ISetting the RS485 SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
JSetting the PTZ CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 40
KSetting the LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
LSetting a REMOTE CONTROL ID . . . . . . . . . . . . . . . . . . . . 41
NETWORK settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
ASetting the PORT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
BSetting a CLIENT ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . 42
CSetting the BANDWIDTH SAVING . . . . . . . . . . . . . . . . . . . 42
DSetting the NETWORK TYPE . . . . . . . . . . . . . . . . . . . . . . . 43
ESetting the DDNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
FSetting the SEND E-MAIL . . . . . . . . . . . . . . . . . . . . . . . . . . 45
GSetting the NTP SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
HDD SET settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
ASetting the OVERWRITE . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
BFORMAT settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
CSetting the auto delete function. . . . . . . . . . . . . . . . . . . . . 48
SERVICE settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ASetting the SAVE SETUP TO A USB . . . . . . . . . . . . . . . . . 49
BSetting the LOAD SETUP FROM A USB . . . . . . . . . . . . . . 49
CDisplays the hard disk information . . . . . . . . . . . . . . . . . . 49
Operations using the Network . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Connection and settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Installing "Sanyo DVR Utility 2000S" . . . . . . . . . . . . . . . . . . . 50
To uninstall the software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Connecting to this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Main screen structure and function of each part . . . . . . . . . . . 53
Function of the operation panel . . . . . . . . . . . . . . . . . . . . . . . 54
Main screen basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
ASwitching the display mode of the screen . . . . . . . . . . . . 55
BRecording live video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
CFreezing the live video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
DThe audio is output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
ESaving images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
FOperating the PTZ dome camera . . . . . . . . . . . . . . . . . . . . 58
Search mode operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
ASearching and playing recorded video . . . . . . . . . . . . . . . 60
BBacking up DVR recorded video . . . . . . . . . . . . . . . . . . . . 61
Setup menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
AGeneral settings (General) . . . . . . . . . . . . . . . . . . . . . . . . . 62
BCamera designation settings (Site) . . . . . . . . . . . . . . . . . . 63
CEvent settings (Event). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
DEvent log search, view, save (Log View). . . . . . . . . . . . . . 64
ERecord settings (Record) . . . . . . . . . . . . . . . . . . . . . . . . . . 65
FDisk settings (Disk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
GVersion information (About). . . . . . . . . . . . . . . . . . . . . . . . 65
Remote Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
ARemote Setup operating procedure . . . . . . . . . . . . . . . . . 66
BSetting the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
CSetting the Alarm-Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
DSetting the Monitor2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
ESetting the Record. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
FSystem settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
GDescription. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
HSetting the PTZ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
ISetting the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
JSetting the Send E-Mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
KSetting the NTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
LSetting the Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Operations using the Web browser . . . . . . . . . . . . . . . . . . . . . . 76
Part names of the remote control . . . . . . . . . . . . . . . . . . . . . . . . 79
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Mounting the hard disk (S-ATA) . . . . . . . . . . . . . . . . . . . . . . . . . 81
L8HBT_WA(DSR-2116_2108)(GB).book i ページ ２００９年５月２７日 水曜日 午後４時５０分

ii
Safety precautions
CAUTION: Changes or modifications not expressly approved by the
manufacturer may void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For the customers in Canada
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE A RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: To reduce a risk of fire or electric shock, do not expose
this product to rain or moisture.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
CAUTION
This product employs a Laser System.
To ensure proper use of this product, Please read this owner's
manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized service
center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE
INTO BEAM.
This class B digital apparatus complies with Canadian ICES-003.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacture’s instructions.
FOR CALIFORNIA, U.S.A. ONLY
This product contains a CR Coin Lithium Battery which
contains Perchlorate Material - special handling may apply.
See www.dtsc.ca/gov/hazardouswaste.perchlorate.
Licensed Under U.S. Patent No. 4,974,088
Please note:
Your SANYO product is designed and
manufactured with high quality materials and
components which can be recycled and
reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from your
household waste.
Please dispose of this equipment at your local
community waste collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic products.
Please help us to conserve the environment
we live in!
This symbol mark and recycle system
are applied only to EU countries and
not applied to the countries in the
other area of the world.
FOR RUSSIAN USERS
This product is certified by an official
certification company which is authorized by
the Russian Federation.
ДЛЯ ПОЛЬЗОВАТЕЛЕЙ
РОССИИ
Данная продукция сертифицирована
официальным органом по сертификации
Российской Федерации.
Declaration of Conformity
Model Number : DSR-2116, DSR-2108
Trade Name : SANYO
Responsible party : SANYO FISHER COMPANY
Address : 21605 Plummer Street, Chatsworth, California
91311
Telephone No. : [phone]
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
L8HBT_WA(DSR-2116_2108)(GB).book ii ページ ２００９年５月２７日 水曜日 午後４時５０分

Safety precautions
iii
These precautions must be followed for safety reasons.
Warning
bDo not use if the unit emits smoke,
strange sounds are heard or odor is
emitted.
Continued use may cause electrocution and/
or fire. Immediately remove the power plug
from the outlet. Once the unit stops emitting
smoke, consult the dealership where this unit
was purchased or factory shop for repairs.
Do not attempt repairs on your own.
bMake sure the power cable is not damaged.
• Always use the power cable supplied with
the unit.
• Do not place heavy objects on the power
cable or place the power cable near
heating equipment. Also, do not bend the
power cable forcefully, work upon or staple
it.
A damaged power cable may result in fire
and/or electrocution.
• Should the power cable become damaged
it must be replaced by the dealership
where this unit was purchased or factory
shop.
bMake sure there is no dust accumulation on the
power plug or the outlet.
• Dust accumulation may result in a
short-circuit and heat generation and
cause fire.
• Be especially careful when using an outlet
situated in a room exposed to high
humidity, condensation and/or dust, or in a
kitchen.
• Periodically remove the power plug from
the outlet and clean any dust and dirt
between the plug and the outlet.
bCaution when connecting the power cable
• Connect the power plug directly with the
outlet. Faulty connection may result in
heat generation and cause fire.
• Do not use the power cable while it is tied
in a bundle. This may result in heat
generation and cause fire.
• When using the extension cord supplied,
make sure the power consumption of the
connected unit does not exceed the
electrical rating of the extension cord.
Higher power consumption may result in
heat generation and cause fire.
bDisassembly prohibited
• Do not place your hand inside this unit as
this may cause fire and/or electrocution.
• Consult the dealership where this unit was
purchased or factory shop for diagnostics,
adjustments, and repairs.
bDo not place any foreign objects inside the unit.
• Do not insert or push in any metal or
combustible objects through openings
such as air ducts. This may cause fire and/
or electrocution.
• In the event that a foreign object is inside
the unit, turn off and unplug the unit.
Consult the dealership where this unit was
purchased or factory shop. Continued use
may result in fire and/or electrocution.
bDo not place a container holding
water or other liquids above the unit
when it is connected to power.
In the event that water gets inside the unit,
turn off and unplug the unit. Consult the
dealership where this unit was purchased or
factory shop.
Continued use may result in a fire or
electrocution.
bDo not allow the unit to get wet.
• This unit is not waterproof. Do not expose
the unit to water. This may cause fire and/
or electrocution.
Do not use in a bath or shower room.
• In the event that the internal components
have been exposed to water, turn the
power off and remove the power plug from
the outlet. Consult the dealership where
this unit was purchased or factory shop.
Continued use may cause electrocution
and/or fire.
Remove the power
plug from the outlet.
Prohibited
Prohibited
Prohibited
Disassembly
prohibited.
Remove the power
plug from the outlet.
Prohibited
Water is prohibited
Remove the power
plug from the outlet.
Water is prohibited
Exposing to water
is prohibited
L8HBT_WA(DSR-2116_2108)(GB).book iii ページ ２００９年５月２７日 水曜日 午後４時５０分

Safety precautions
iv
Warning
bDo not use during thunder/thunder storms.
Do not use during thunder/thunder storms.
Never touch the connection cable during
thunder/thunder storms. This may cause
electrocution.
bDo not place in an unstable position.
• Doing so may cause accidents and/or
breakdowns through falling or toppling.
• In the event that the unit has been
dropped or the casing has been damaged,
turn the power off and remove the power
plug from the outlet. Consult the
dealership where this unit was purchased
or factory shop.
Continued use may cause electrocution
and fire.
bDo not expose to shock or vibration.
Stored data may be damaged or lost through
hard-disk breakdowns caused by shock/
vibration.
bDo not use this unit in areas where it is exposed
to the possibility of explosion.
Do not use this unit in areas where explosive
and/or flammable gases are present. This
may cause fire and/or explosion.
Caution
bDo not pull on the power cable when removing
the power plug from the outlet.
Hold the power plug when disconnecting the
power cable from the outlet. Pulling on the
power cable may damage the cord. This may
cause fire and/or electrocution.
bDo not touch the power plug with wet
hands.
Doing so may result in electrocution.
bDo not sit on.
Doing so may cause the unit to fall, be
damaged and/or result in injury.
bMake sure the cables are connected properly.
Connect and install the power cable and
connection cable very carefully. Tripping over
the cable may result in the unit capsizing or
falling and cause injury.
bDo not place heavy objects on connected units.
Doing so may affect the stability of the unit
and cause it to fall which may result in injury.
Doing so may also damage the unit
depending on the weight of the object.
bShipment and portability
• Never move this unit while the power is
turned on.
• When shipping, remove the power plug
from the outlet, confirm that the
connection cable has been removed, and
store in original packaging. Ship using a
method that causes the least amount of
shock and/or damage to this unit. Also, do
not drop this unit.
bMaintenance when the unit is going to remain
unused for long periods of time
Remove the power plug from the outlet.
Carrying out maintenance without removing
the power plug may cause electrocution.
Contact prohibited
Remove the power
plug from the outlet.
Prohibited
Prohibited
Prohibited
Prohibited
Wet hands
prohibited
Prohibited
Prohibited
Remove the power
plug from the outlet.
Remove the power
plug from the outlet.
L8HBT_WA(DSR-2116_2108)(GB).book iv ページ ２００９年５月２７日 水曜日 午後４時５０分

Safety precautions
v
Caution
bCleaning the internal components
Consult the dealership where this unit was
purchased or factory shop for cleaning
internal components. Leaving the unit unused
for long periods of time may attract dust to the
internal components, which in turn may
cause fire and/or breakdowns.
bDo not block the cooling fans or air ducts.
• This unit is equipped with air ducts and
cooling fans in order to assist the
ventilation of hot air produced by the hard
disk drive.
Placing covers, placing in a case, or
placing inside bookcases may cause heat
build up, and may result in fire and/or
electrocution.
bWhen the unit is set up in a rack
The hard disk drive and so on generates heat, which may
cause operation errors and damage, therefore leave the
specified open spaces when setting up the unit. Also, use
only an open framed rack without back panels.
• Leave the specified open space between the unit and
the rack
• Leave 1 cm or more on the upper and lower side
• Leave 5 cm or more on both sides
• Leave open space of 10 cm or more between the rear
of the rack and the wall
bDo not expose to extreme temperatures or
humidity changes.
• Do not place in areas where the unit will
be exposed to extreme temperatures
(±10 degrees C per hour) or humidity
changes.
bPoints on unit positioning
This unit is constructed using precision
electronic parts. Avoid placing it in areas
described below as this may cause faulty
operation and/or breakdowns.
• In direct sunlight
• In places exposed to water
• In the vicinity of cooling and heating units or humidifiers
• Near the air conditioner where the unit is exposed to
cool air
• Dusty areas
• Areas that contain fire hazards
• Areas that contain magnetic items
• In the vicinity of volatile substances
• Areas where the unit will be exposed to constant
vibration (in trains, cars, etc.)
bCautionary points on condensation
Droplets may form on the outside when very cold water is
poured into a cup. In the same way, droplets may form
around the internal components of this unit. This is called
condensation.
Do not use this unit if condensation has formed.
Using this unit while condensation is formed may cause
breakdowns. In the event of sudden sharp temperature
changes, turn off the power and do not use this unit until
the temperature of the room where it is positioned
stabilizes (about 2 hours).
Condensation will not occur while the power is turned on.
When condensation is likely to occur ...
Use the unit after turning the power off and leaving it for
1~2 hours.
Prohibited
Prohibited
Prohibited
L8HBT_WA(DSR-2116_2108)(GB).book v ページ ２００９年５月２７日 水曜日 午後４時５０分

Safety precautions
vi
Follow the points outlined below for proper use
bBack up battery.
• This unit has got a built-in lithium battery used to back
up the clock function. The battery continues to operate
the clock even when there is a power disruption.
• The life expectancy of the battery is approximately 2
years. If the battery runs out or leaks, the clock resets
when the power is turned off. When the power is turned
back on (or when rebooted), a warning message to
replace the battery is displayed on the monitor screen.
Consult the dealership where this unit was purchased
or a "Repair Service Center".
Battery fluid leaks
In the event that the battery fluid has leaked rinse hands/
clothes thoroughly with water.
Loss of eyesight may result if battery fluid enters the eyes.
Do not rub the eyes. Immediately rinse with clean water
and consult a physician.
When disposing of this unit
Consult the dealership where this unit was purchased for
information concerning the disposal of the lithium battery.
bIf unused for a lengthy period of time
Remove the power plug from the outlet. Remember to
occasionally turn the power on in order to maintain correct
function.
bPre-confirm important recording
assignments
Recording and/or playback functions may be unavailable
due to hard-drive or connecting unit failures. Always
confirm that recording can be carried out successfully
before carrying out important recording assignments.
The recorded content cannot be guaranteed.
It is recommended to periodically back up data in order to
prevent the loss of the data in the event of breakdowns,
recording faults or accidents.
bMaintaining this unit
Turn the power off and remove the power plug from
the outlet. Wipe away any dust using a soft cloth.
When the stains are hard to remove...
Soak a cloth in water with diluted neutral detergent
and wring it. Wipe the stain with the moistened cloth
and finally dry off with a dry cloth.
CAUTION:
• Do not use paint thinner, benzine, or any other alcohol
based agents for cleaning. The exterior may deteriorate
or the paint may wear off.
• Follow the instructions supplied on the packaging of the
chemical cleaning agent.
• Do not spray volatile substances, such as insecticides,
etc. onto the unit. Also, avoid extended contact with
rubber or vinyl products.
This may cause exterior damage or wear the paint off.
bCopyright information
• This manual and software are copyrighted to SANYO
Electric Co., Ltd.
• Microsoft, Windows and Internet Explorer are
trademarks or registered trademarks of Microsoft USA
in the USA and in other countries.
• Intel and Pentium is a trademark or registered
trademark of Intel USA in the USA and in other
countries.
• Brand and product names used in this manual are the
trademarks or registered trademarks of their respective
companies.
Except for personal use, copyright law prohibits the use of
recorded copyrighted images without the permission of the
copyright holder.
bPersonal data protection
Images or footage recorded by the camera video system in
which people are captured and can be identified are
considered to be personal information and fall within the
scope of the Personal Data Protection Law. It is the
responsibility of the user to operate the system in
accordance with the above law.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
L8HBT_WA(DSR-2116_2108)(GB).book vi ページ ２００９年５月２７日 水曜日 午後４時５０分

1
Main Features
• Long-time MPEG4 recording
• Moving video monitoring in split screen
• Coaxial superimposed type (COAX) camera
control
• Maximum recording speed
DSR-2116: 240 IPS (NTSC) or 200 IPS (PAL)
DSR-2108: 120 IPS (NTSC) or 100 IPS (PAL)
• 4ch audio recording
• Image downloading to USB memory
• Remote operation from PC via network
• VGA video output
• Built-in disc drive (DVD-R or CD-R/RW)
• Comes with IR remote control and DVR utility
software
Main parts
replacement timings
Continued use of this unit in a 25°C environment may result in
wear and deterioration of the parts of the unit.
We recommend you replace the following parts according to
the timings listed below. The replacement timings listed are
approximate and do not guarantee the performance of the
part in question.
bHard disk: 2 years (25°C environment)
The life expectancy of each part depends on the
environment in which the unit is used. However, the head
and motor are particularly prone to wear and deterioration.
Therefore, writing errors are more likely to occur after two
years of use.
bCooling fan: 3 years (25°C environment)
Cooling fan failure causes higher internal temperatures
which may result in a faulty hard disk. Periodically check
whether the cooling fan is working properly.
Memo: This unit is equipped with two cooling fans on the
right and at the rear. The cooling fan on the right may
be replaced.
bBattery: 2 years (25°C environment)
Cooling fan
Accessories
Check that all the parts shown below are supplied.
1Power cable (×2)
2Remote control
*2“AAA” batteries are necessary for the remote control.
(Batteries not included)
3HDD mounting bracket (×2)
4Rubber pad (×8)
5Mounting bracket screws (×8)
6HDD fixing screw (×8)
7S-ATA cable (×2)
8CD-ROM
• Instruction Manual (Digital Video Recorder)
12
34
56
78
L8HBT_WA(DSR-2116_2108)(GB).book 1 ページ ２００９年５月２７日 水曜日 午後４時５０分

2
About the split
screen display
This manual is common to 2 models. Major differences
between these two models are, the number of channel
selection buttons available on the front panel and the number
of input/output terminals available on the rear panel.
As a result, the number of split screens that can be displayed
on the monitor is different, as shown below.
(DSR-2116) (DSR-2108)
Warning
The hard disk is a precision instrument. To avoid damage,
handle the hard disk with care and do not expose it to shock.
Do not block the ventilation holes and do not allow the cooling
fan to stop. Doing so may cause heat build up and may
shorten the life expectancy of the hard disk.
GThis unit is designed to be positioned horizontally. Do
not position vertically.
GDo not expose to shock or vibration and do not
transport while power is turned on.
Always turn the power off when moving in and out of racks
or other shelves.
GDo not remove the power plug while recording or
playing images back.
GDo not move the unit for approximately 30 seconds
after turning the power off.
The hard disk continues to rotate for a short duration after
the power has been turned off. The unit is further
susceptible to damage through shock and vibration during
that period. It is imperative that you do not move the unit
during that time.
GDo not expose to shock or vibration.
Avoid placing this unit directly on the floor. Make sure that
the four stands attached to the base of this unit are used
when placing it on the floor.
GAlways use the original packaging (packaging
supplied at the time of purchase), when shipping the
unit.
Make sure you use the packaging materials supplied at the
time of the original purchase when shipping the unit or a
single internal component of the unit. Select a shipping
method that will cause the least amount of shock to the
unit during shipping.
Consult the dealership where this unit was
purchased for hard disk replacement.
• The hard disk is vulnerable to static electric shocks. Take
appropriate measures to prevent exposure to static
electricity.
• Unpackaged drives should be placed horizontally with their
base plate facing upwards on top of a soft cloth. Exposing
the hard disk to shocks and vibration may cause
breakdowns.
• Do not expose the drive to shocks and/or vibrations when
removing/tightening the screws at the time of hard disk
replacement. Firmly tighten the screws after replacement.
L8HBT_WA(DSR-2116_2108)(GB).book 2 ページ ２００９年５月２７日 水曜日 午後４時５０分

3
Names and functions of parts
Front panel
1Power button and indicator ( )
2USB terminal (USB) (Exclusively for 2.0) (P26)
To save video, connect a USB memory.
3Disc drive
To save video, insert a DVD-R or CD-R/RW.
To open and close the insert tray, open the panel and
press the button.
4LAN indicator (LAN)
The indicator blinks when the unit is connected and used
through the LAN cable.
5Alarm indicator (ALARM)
The indicator lights when an alarm is set off.
6Hard disk drive indicator (HDD)
The indicator lights when the hard disk is being accessed.
7Recording indicator
The channel number being recorded lights.
8Record/Stop button (REC/STOP) (P16)
Starts/Stops the recording of the monitored live image
displayed.
9Automatic camera scrolling button (SEQ) (P13)
Automatically switches through and displays the images of
each live.
FQuad-screen display button (QUAD) (P13)
The monitor video is displayed on quad-screen.
GMulti button (MULTI) (P13)
The monitor video is displayed on multi-16 or multi-9
screen.
☞In DSR-2108, the monitor video is displayed on
multi-8 screen.
HMark/Copy button (MARK/COPY) (P26)
Switches to image saving mode.
ISearch button (SEARCH) (P22)
Switches to recorded-images searching mode.
JPan/Tilt/Zoom button (PTZ) (P14)
Operates the Pan/Tilt/Zoom/Focus mode of the PTZ dome
camera.
KCamera channel selection buttons (P12)
The video of the selected channel is displayed on
single-screen.
Also used to enter a password.
LMenu button (MENU) (P9/30)
Displays the settings menu screen and switches to setting
mode.
MExit/Stop button (EXIT/STOP) (P17)
During settings: Returns to the previous screen.
During playback: Interrupts playback operation.
Memo: A security lock can be set by holding the button
down. (P28)
4 5 6 7 8 9FGHIJ L M
N
1
2
3K
(DSR-2116)
(DSR-2108)
NControl button Playback in progress Setting in progress
(Cursor operation)
ASkip button (SKIP):
The player jumps one minute forward.
:
Moves the cursor upward.
BReplay button (REPLAY):
The player jumps one minute backward.
:
Moves the cursor downward.
C
button:
The player fast rewinds. :
Changes the settings value or moves the
cursor to the left.
D
button:
The player fast-forwards. :
Changes the settings value or moves the
cursor to the right.
E
button:
The player displays a still image.
Plays the image selected during the image
search operation.
ENTER :
Sets the selected item or displays the
settings screen.
B
CD
A
E
L8HBT_WA(DSR-2116_2108)(GB).book 3 ページ ２００９年５月２７日 水曜日 午後４時５０分