SATO S100WP-01 User manual

Instruction Manual
Standard Temperature Probe Model S100WP-01 for
SK-100WP Wall-Mount Waterproof Digital Thermometer
Thank you for purchasing the S100WP-01 Temperature probe.
- This product is designed to measure temperature by connecting to a SK-100WP Wall-Mount
Waterproof Digital Thermometer. Do not use it for other purposes.
- Read this manual thoroughly before using and keep the manual in a safe place for future reference.
Name of Section
① Sensing stem
② Grip
③ Connector
④ Nut
⑤ Cord
⑥ Clip
Connecting Probes
1. Match the convex part of plug and concave part of
socket and insert the plug of the probe into the
connector socket.
2. Turn the nut clockwise to tightly fasten.
3. To remote the probe, turn the nut counterclockwise
to loosen and pull the plug straight toward you.
How to use the clip
Pass through the sensing stem to the holes of clip.
(Refer to the right figure)
Fasten the sensing stem with the clip in edge of such a pot.
* If the sensing stem is not locked, expand the plates on both sides.
Cautions
Be sure to use the probe within the specified measuring range. Using it out of the range can cause
measuring failures or damages.
Be careful not to get a burn. The stainless-steel stem of the probe and clip become extremely hot
when measuring high temperature. Wait until the temperature falls down before storing.
Make sure to insert only the sensing stem into measuring object. Never immerse the probe into
water except the sensing part.
Never disassemble or modify the probe.
Do not apply any shocks to the probes. Doing so may cause measuring failures.
1
Concave
Convex
2
3
4
5
6
Socket
Plug
expand

Cautions on Handling
Do not forcibly pull, bend or bundle the sensor cord. The sensor cord may get damaged.
Do not immerse the whole unit into
water.
Do not insert the sensing stem into an
object by pressing the sensor cord of
the grip with palm.
Do not bundle or fasten the sensor
cord on to the grip.
Care and Cleaning
Even though the main unit and probe are washable, be cautious of the followings:
Do not leave the probe in the water.
Do not use any chemicals or cleaning solvents for cleaning.
After cleansing, wipe off any moisture off the probes. Never use any drying machine.
Specifications
Name
Standard Temperature Probe
Model
S100WP-01
Cat. No.
8051-00
Measuring Range
-10.0 to 110.0°C
Sensing element
Thermistor
Accuracy
±1°C
Waterproof Property
Conforming to JIS C 0920 IPX7 rated
Dimensions
Sensing Stem:φ5 x L500 mm
Cord Length: About 1.5 m
Materials
Sensing Stem: SUS304
Grip Polybutylene Terephthalate (PBT) resin
Cord approx. 1 m
Weight
approx. 90 g
Accessories
Clip for mount
3-4, Kanda-Kajicho, Chiyoda-ku, Tokyo 101-0045 Japan
URL: http://www.sksato.co.jp/english/
sensor cord
grip