SATO CS-9018 User manual

CS-9018
www.satolabeling.com
Fast, Reliable Cutter/Stacker Delivers Time-Saving Convenience.
The Sato® CS-9018 Cutter/Stacker is a self-contained, continuous-form, ticket-handling device. It is designed to slit, cut and
sequentially stack preprinted tickets at a rate of 188,000 per hour.1
Operator-friendly controls allow for fast ticket setup, operation and error detection. The CS-9018 features automatic top-of-form
registration for quick loading of forms. Removable slitter assembly and interchangeable slitter blades enable fast changeover
between ticket-size formats. Memory storage of up to 99 ticket configurations also helps to minimize setup time.
Adjustable conveyor-speed controls compensate for variations in ticket thickness. And, to increase motor reliability, the CS-9018
has an automatic, pre-configurable time-out circuit to shut down both vacuum and conveyor motors when they’re not in use.
The CS-9018 has a double-cut capability that removes the horizontal perforation, delivering clean-cut ticket edges. Separating
batches on the CS-9018 is also quick and easy: when printed by Sato laser printers, black separator bars on the header and
trailer tickets of each batch enable operators to spot the beginning and end of even the smallest ticket runs at a glance. An
attractive enclosed and shelved storage cabinet provides easy access to CS-9018 supplies and provides convenient storage for
the optional slitter assembly.
• Automatically registers top of form
• 2-Line, 40-character LCD display
• Variable speed capability
• Display information includes ticket
count, speeds and throughput
• Stores up to 99 ticket setup configurations
• Double-cut capability for clean-edge tickets
• Quick adjustment of ticket length and height
via easy-to-read scale (U.S. standard and
metric measurements)
• Easy-to-service air filter improves productivity
• Worldwide sales and service through Sato
1 Requires optional slitter assembly

CS-9018
Throughput
Tickets Per Hour:
• 188,000 tickets per hour1@ 1.0” x 2.0”
(24.5 mm x 50.8 mm) – 17 across
• 144,000 tickets per hour @ 1.25” x 2.0”
(31.75 mm x 50.8 mm) – 13 across
• 92,000 tickets per hour @ 1.5” x 3.5”
(38.1 mm x 88.9 mm) – 11 across
• 42,000 tickets per hour @ 3.0” x 3.5”
(76.2 mm x 88.9 mm) – 5 across
Stock
Overall Stock Width:
• Maximum 18.0” (457 mm)
• Minimum 6.0” (152.4 mm)
• Pin feed 0.5” (12.7 mm) per side
Ticket Sizes:
• Length: 2.0” to 4.5” (51 mm to
114.3 mm) Max.
• Width: 1.25” to 3.5” (31.75 mm to
88.9 mm)
Note: Slitter option available for 1” ticket
width
Maximum Stock Thickness: 20 mil
Stacker Capacity: 38.0” (965.2 mm) or
approx. 3,500 tickets (@ 11 mil)
Options
• Interchangeable slitter modules, including
small width (1” to 1.5”)
• Loop control
1 Requires optional slitter assembly
SPECIFICATIONS
SATO Labeling Solutions America, Inc.
1140 Windham Parkway
Romeoville, IL 60446
Phone: [phone] Fax: [phone]
E-mail: [email protected]
© 2006 SATO Labeing Solutions America, Inc. All rights reserved. Specifications subject to change without notice. Rev. 4/06 Reorder #LSR-003
www.satolabeling.com
LCD Display
Format: 2 lines, 40 characters
Content:
• Ticket count, speed and throughput
• Up to 99 programmable configurations
(length and height)
• Full array of Error messages: ON/JAM,
STACKER FULL, COVER OPEN, PAPER
OUT
Language support: English, Spanish,
Italian and German
Safety Features
Auto System STOP: Activated if protective
covers are not in place, paper out, stacker
full, or ticket jam
Manual STOP Switch: Yes
Electrical/Environmental/Physical
Power Supply: 220 VAC/ 60 Hz, single
phase
Acoustic: 78 Dba
Dimensions (HxWxD): 43.0” x 78.0”
x 31.0” (1092.2 mm x 1981.2 mm x
787.4 mm)
Weight: 462 lb. (209.5 kg)