saunalife Garden G7 User manual

INSTALLATION GUIDE
Garden-Series Model G7 & G7S

2
Thank you for purchasing a SaunaLife outdoor sauna!
1. INSTALLATION REQUIREMENTS
The base or foundation for Sauna must be leveled and stable. Sauna must be at least 3
inches higher from the surrounding ground. All base beams must have a support under
them.
Recommendation:
We recommend placing Sauna on concrete blocks or strips that have a compressed gravel
underneath. Using geotextile under the Sauna prevents the growth of grass and weed.
It is also possible to place the Sauna on terrace or pavement, but the Sauna should still be
higher than the surface.

3
2. TRANSPORT
Sauna can be lifted from above:
Sauna can be lifted from below:

4
3. FINAL ASSEMBLY
Final assembly shall be organized by the client.
Final assembly includes installing of the:
•Parapet metal
•Decorative base boards
•Outdoor lights 120V
•Heater (+ control unit)
•Rainwater system
•Cables
•Electrical cabinet for Lighting
3.1 Final Assembly Instructions
3.1.1 Parapet metals must be installed to avoid weather damage of the sauna:

5
3.1.2 Base boards are for decorative purposes and easy to install. Rainwater system must
be installed when sauna is exposed to rainwater.
4. MAINTENANCE
Maintenance of the outdoor cladding should be done once a year.
If sauna is used twice a week, then interior cladding, sauna bench and floor grid should be
oiled once a year.
5. IMPORTANT SAFETY REQUIREMENTS
Sauna door must be closed during heating to avoid over-heating!

6
saunalife.com
[e-mail]
Rev 4/2023